DataSheet26.com

NSTS1415 PDF даташит

Спецификация NSTS1415 изготовлена ​​​​«JRC» и имеет функцию, называемую «SAW FILTER».

Детали детали

Номер произв NSTS1415
Описание SAW FILTER
Производители JRC
логотип JRC логотип 

4 Pages
scroll

No Preview Available !

NSTS1415 Даташит, Описание, Даташиты
NSTS1415 Apr. 2013
NewJRC SAW FILTER
NSTS1415
Application
420MHz High Attenuation Type
Electrical Specification: (Table 1)
The device characteristics are measured in the circuit shown in Fig.1.
Table 1. Electrical Specifications
Item
Spec.
Typical
Input and Output Impedance
- 50Ω
Nominal Center Frequency (f0)
- 420MHz
Insertion Loss
410-430MHz
4.0dB max.
3.1dB
Response Variation
2.0dB max.
0.7dB
Input / Output Return Loss
10dB min.
15dB
Out of Band Rejection
456.675MHz
15dB min.
23dB
(Relative to
Through Level)
566.7MHz
50dB min.
60dB
(Operating Temperature Range: -40~+85ºC)
Maximum Rating: (Table 2)
Table 2. Maximum Ratings
Item
Maximum Input Power
Maximum DC Voltage
Operating Temperature Range
Storage Temperature
Rating
+10dBm
7.5V
-40~+85ºC
-40~+85ºC
Mechanical Specifications: (Fig.2)
Package is designed as small as 3.0x3.0x1.15[mm3] for SMD (Surface Mount Device) type.
Notice:
This part is electrostatic discharge sensitive and may be damaged by improper handling.
http://www.njr.co.jp/products/device/index.html
http://www.njr.com/products/device/index.html
(Japanese)
(English)









No Preview Available !

NSTS1415 Даташит, Описание, Даташиты
IN
50Ω
16
2 SAW 5
34
OUT
50Ω
NSTS1415 Apr. 2013
Fig.1 Measuring circuit
(a) 3. 0±0. 15 ( b)
222
RK
( c)
( 1)
( 2)
( 0. 6)
34
2
( 1. 80)
1
5
6
( 0. 45)
( 0. 75)
[ 4x]
Fig.2 Package dimensions (in mm)
3.8
2.2 1.15
Marking
(1) Lot Number
(a) Year
(b) Month
*Oct.---
Nov.---
Dec.---
(c) Date
*1-9---
10-19---
20-31---
(2) Part Number Mark
X
Y
Z
0
1
2
Pin no.
1
2
3
4
5
6
Connection
GND
IN
GND
GND
OUT
GND
1.15
Fig.3 Desirable land area (in mm)









No Preview Available !

NSTS1415 Даташит, Описание, Даташиты
NSTS1415 Apr. 2013
Notice
1. Use this component within operating temperature range. It might not be
satisfied with electrical specification without operating temperature range.
When it is used less than -40ºC or more than +85ºC, it might be a cause of
degradation or destruction of the component. Even if it endures during a short
time, it causes degradation of qualification.
2. When soldering iron is used, solder with the temperature at the tip of soldering
iron: 350ºC max., the time of soldering: 10 seconds max., the power of
soldering iron: 30W max..
3. Notice that the allowed time of soldering with soldering iron is accumulated
time, when soldering is repeated.
4. As rapid temperature change for cleaning after reflow soldering might be a
cause of destruction clean this component after confirming that temperature of
this component goes down to room temperature.
5. Confirm that there are not any influence for qualification to this component in
mounting on PCB when this component is cleaned.
6. As it might be a cause of degradation of destruction to apply static electricity to
this component, do not apply static electricity or excessive voltage while
assembling and measuring. And do not transport this component with bare
hand.
7. As it might be a cause of degradation or destruction to apply D.C. voltage
between each terminal, apply D.C. voltage 7.5V max. in actual circuit.
Note
1. This specification specifies the quality of this component as a single unit. Make
sure that this component is evaluated and confirmed against this specification
when it is mounted to your products.
2. The information contained herein may be changed without prior notice. It is
therefore advisable to contact New Japan Radio Company before proceeding
with the design of equipment incorporating this product.
3. The products are designed to be used with ordinary electronic equipment (data
and communications equipment, office equipment, audio-video equipment,
measuring instruments, etc). New Japan Radio Company does not assume any
liability for the case using the products with the application required high
reliability or safety extremely (such as space equipment, sea-bottom equipment,
medical equipment etc). When intending to use any our product please contact
our sales representatives in advance.










Скачать PDF:

[ NSTS1415.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
NSTS1414SAW FILTERJRC
JRC
NSTS1415SAW FILTERJRC
JRC

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск