DataSheet26.com

S29GL064N PDF даташит

Спецификация S29GL064N изготовлена ​​​​«Cypress Semiconductor» и имеет функцию, называемую «3V Page Mode MirrorBit Flash».

Детали детали

Номер произв S29GL064N
Описание 3V Page Mode MirrorBit Flash
Производители Cypress Semiconductor
логотип Cypress Semiconductor логотип 

30 Pages
scroll

No Preview Available !

S29GL064N Даташит, Описание, Даташиты
"Spansion, Inc." and "Cypress Semiconductor Corp." have merged together to deliver high-performance, high-quality solutions
at the heart of today's most advanced embedded systems, from automotive, industrial and networking platforms to highly
interactive consumer and mobile devices. The new company "Cypress Semiconductor Corp." will continue to offer "Spansion,
Inc." products to new and existing customers.
Continuity of Specifications
There is no change to this document as a result of offering the device as a Cypress product. Any changes that have been made
are the result of normal document improvements and are noted in the document history page, where supported. Future
revisions will occur when appropriate, and changes will be noted in a document history page.
Continuity of Ordering Part Numbers
Cypress continues to support existing part numbers. To order these products, please use only the Ordering Part Numbers listed
in this document.
For More Information
Please contact your local sales office for additional information about Cypress products and solutions.









No Preview Available !

S29GL064N Даташит, Описание, Даташиты
S29GL064N, S29GL032N
64 Mbit, 32 Mbit 3 V Page Mode
MirrorBit Flash
Distinctive Characteristics
Architectural Advantages
Single power supply operation
Manufactured on 110 nm MirrorBit process technology
Secured SiliconSector region
– 128-word/256-byte sector for permanent, secure identification
through an 8-word/16-byte random Electronic Serial Number,
accessible through a command sequence
– Programmed and locked at the factory or by the customer
Flexible sector architecture
– 64Mb (uniform sector models): One hundred twenty-eight 32
Kword (64 KB) sectors
– 64 Mb (boot sector models): One hundred twenty-seven 32 Kword
(64 KB) sectors + eight 4Kword (8KB) boot sectors
– 32 Mb (uniform sector models): Sixty-four 32Kword (64 KB)
sectors
– 32 Mb (boot sector models): Sixty-three 32Kword (64 KB) sectors
+ eight 4Kword (8KB) boot sectors
Enhanced VersatileI/OControl
– All input levels (address, control, and DQ input levels) and outputs
are determined by voltage on VIO input. VIO range is 1.65 to VCC
Compatibility with JEDEC standards
– Provides pinout and software compatibility for single-power supply
flash, and superior inadvertent write protection
100,000 erase cycles typical per sector
20-year data retention typical
Performance Characteristics
High performance
– 90 ns access time
– 8-word/16-byte page read buffer
– 25 ns page read time
– 16-word/32-byte write buffer which reduces overall programming
time for multiple-word updates
Low power consumption
– 25 mA typical initial read current,
1 mA typical page read current
– 50 mA typical erase/program current
– 1 µA typical standby mode current
Package options
– 48-pin TSOP
– 56-pin TSOP
– 64-ball Fortified BGA
– 48-ball fine-pitch BGA
Software & Hardware Features
Software features
– Advanced Sector Protection: offers Persistent Sector Protection
and Password Sector Protection
– Program Suspend & Resume: read other sectors before
programming operation is completed
– Erase Suspend & Resume: read/program other sectors before an
erase operation is completed
– Data# polling & toggle bits provide status
– CFI (Common Flash Interface) compliant: allows host system to
identify and accommodate multiple flash devices
– Unlock Bypass Program command reduces overall multiple-word
programming time
Hardware features
– WP#/ACC input accelerates programming time (when high voltage
is applied) for greater throughput during system production.
Protects first or last sector regardless of sector protection settings
on uniform sector models
– Hardware reset input (RESET#) resets device
– Ready/Busy# output (RY/BY#) detects program or erase cycle
Cypress Semiconductor Corporation • 198 Champion Court
Document Number: 001-98525 Rev. *A
• San Jose, CA 95134-1709 • 408-943-2600
Revised October 16, 2015









No Preview Available !

S29GL064N Даташит, Описание, Даташиты
S29GL064N, S29GL032N
General Description
The S29GL-N family of devices are 3.0-Volt single-power Flash memory manufactured using 110 nm MirrorBit technology. The
S29GL064N is a 64-Mb device organized as 4,194,304 words or 8,388,608 bytes. The S29GL032N is a 32-Mb device organized as
2,097,152 words or 4,194,304 bytes. Depending on the model number, the devices have 16-bit wide data bus only, or a 16-bit wide
data bus that can also function as an 8-bit wide data bus by using the BYTE# input. The devices can be programmed either in the
host system or in standard EPROM programmers.
Access times as fast as 90 ns are available. Note that each access time has a specific operating voltage range (VCC) as specified in
the Product Selector Guide and the Ordering Information–S29GL032N, and Ordering Information–S29GL064N. Package offerings
include 48-pin TSOP, 56-pin TSOP, 48-ball fine-pitch BGA and 64-ball Fortified BGA, depending on model number. Each device has
separate chip enable (CE#), write enable (WE#) and output enable (OE#) controls.
Each device requires only a single 3.0-Volt power supply for both read and write functions. In addition to a VCC input, a high-
voltage accelerated program (ACC) feature provides shorter programming times through increased voltage on the WP#/ACC or
ACC input. This feature is intended to facilitate factory throughput during system production, but may also be used in the field if
desired.
The device is entirely command set compatible with the JEDEC single-power-supply Flash standard. Commands are written to
the device using standard microprocessor write timing. Write cycles also internally latch addresses and data needed for the
programming and erase operations.
The sector erase architecture allows memory sectors to be erased and reprogrammed without affecting the data contents of other
sectors. The device is fully erased when shipped from the factory.
The Advanced Sector Protection features several levels of sector protection, which can disable both the program and erase
operations in certain sectors. Persistent Sector Protection is a method that replaces the previous 12-volt controlled protection
method. Password Sector Protection is a highly sophisticated protection method that requires a password before changes to certain
sectors are permitted.
Device programming and erasure are initiated through command sequences. Once a program or erase operation begins, the host
system need only poll the DQ7 (Data# Polling) or DQ6 (toggle) status bits or monitor the Ready/Busy# (RY/BY#) output to
determine whether the operation is complete. To facilitate programming, an Unlock Bypass mode reduces command sequence
overhead by requiring only two write cycles to program data instead of four.
Hardware data protection measures include a low VCC detector that automatically inhibits write operations during power
transitions. The hardware sector protection feature disables both program and erase operations in any combination of sectors of
memory. This can be achieved in-system or via programming equipment.
The Erase Suspend/Erase Resume feature allows the host system to pause an erase operation in a given sector to read or
program any other sector and then complete the erase operation. The Program Suspend/Program Resume feature enables the
host system to pause a program operation in a given sector to read any other sector and then complete the program operation.
The hardware RESET# pin terminates any operation in progress and resets the device, after which it is then ready for a new
operation. The RESET# pin may be tied to the system reset circuitry. A system reset would thus also reset the device, enabling the
host system to read boot-up firmware from the Flash memory device.
The device reduces power consumption in the standby mode when it detects specific voltage levels on CE# and RESET#, or when
addresses are stable for a specified period of time.
The Write Protect (WP#) feature protects the first or last sector by asserting a logic low on the WP#/ACC pin or WP# pin, depending
on model number. The protected sector is still protected even during accelerated programming.
The Secured Silicon Sector provides a 128-word/256-byte area for code or data that can be permanently protected. Once this
sector is protected, no further changes within the sector can occur.
Cypress MirrorBit flash technology combines years of Flash memory manufacturing experience to produce the highest levels of
quality, reliability and cost effectiveness. The device electrically erases all bits within a sector simultaneously via hot-hole assisted
erase. The data is programmed using hot electron injection.
Document Number: 001-98525 Rev. *A
Page 3 of 83










Скачать PDF:

[ S29GL064N.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
S29GL064A64 Megabit 3.0-Volt only Page Mode Flash MemorySPANSION
SPANSION
S29GL064M3.0V single power Flash memorySPANSION
SPANSION
S29GL064N3V Page Mode MirrorBit FlashCypress Semiconductor
Cypress Semiconductor
S29GL064N3.0-Volt only Page Mode Flash MemorySPANSION
SPANSION

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск