DataSheet26.com

S25FL132K PDF даташит

Спецификация S25FL132K изготовлена ​​​​«Cypress Semiconductor» и имеет функцию, называемую «3.0V SPI Flash Memory».

Детали детали

Номер произв S25FL132K
Описание 3.0V SPI Flash Memory
Производители Cypress Semiconductor
логотип Cypress Semiconductor логотип 

30 Pages
scroll

No Preview Available !

S25FL132K Даташит, Описание, Даташиты
S25FL116K, S25FL132K, S25FL164K
16 Mbit (2 Mbyte), 32 Mbit (4 Mbyte),
64 Mbit (8 Mbyte) 3.0V SPI Flash Memory
Features
Serial Peripheral Interface (SPI) with Multi-I/O
– SPI Clock polarity and phase modes 0 and 3
– Command subset and footprint compatible with S25FL-K
Read
– Normal Read (Serial):
– 50 MHz clock rate (40 °C to +85 °C/105 °C)
– 45 MHz clock rate (40 °C to +125 °C)
– Fast Read (Serial):
– 108 MHz clock rate (40 °C to +85 °C/105 °C)
– 97 MHz clock rate (40 °C to +125 °C)
– Dual Read:
– 108 MHz clock rate (40 °C to +85 °C/105 °C)
– 97 MHz clock rate (40 °C to +125 °C)
– Quad Read:
– 108 MHz clock rate (40 °C to +85 °C/105 °C)
– 97 MHz clock rate for S25FL164K (40 °C to +125 °C)
– 54 MB/s maximum continuous data transfer rate
(40 °C to +85 °C/105 °C)
– Efficient Execute-In-Place (XIP)
– Continuous and wrapped read modes
– Serial Flash Discoverable Parameters (SFDP)
Program
– Serial-input Page Program (up to 256 bytes)
– Program Suspend and Resume
Erase
– Uniform sector erase (4 kB)
– Uniform block erase (64 kB)
– Chip erase
– Erase Suspend and Resume
Cycling Endurance
– 100K Program-Erase cycles on any sector
Data Retention
– 20-year data retention
Security
– Three 256-byte Security Registers with OTP protection
– Low supply voltage protection of the entire memory
– Pointer-based security protection feature (S25FL132K and
S25FL164K)
– Top / Bottom relative Block Protection Range, 4 kB to all of
memory
– 8-Byte Unique ID for each device
– Non-volatile Status Register bits control protection modes
– Software command protection
– Hardware input signal protection
– Lock-Down until power cycle protection
– OTP protection of security registers
90 nm Floating Gate Technology
Single Supply Voltage
– 2.7 V to 3.6 V (Industrial, Industrial Plus, and Extended
temperature range)
– 2.6 V to 3.6 V (Extended temperature range)
Temperature Ranges
– Industrial (40 °C to +85 °C)
– Industrial Plus (40 °C to +105 °C)
– Extended (40 °C to +125 °C)
– Industrial, GT Grade, AEC-Q100 Grade 3 (40 °C to +85 °C)
– Industrial Plus, GT Grade, AEC-Q100 Grade 2(40 °C to +105 °C)
– Extended, GT Grade, AEC-Q100 Grade 1 (40 °C to +125 °C)
Package Options
– S25FL116K
– 8-lead SOIC (150 mil) – SOA008
– 8-lead SOIC (208 mil) – SOC008
– 8-contact WSON 5 mm x 6 mm – WND008
– 24-ball BGA 6 mm 8 mm – FAB024 and FAC024
– KGD / KGW
– S25FL132K
– 8-lead SOIC (150 mil) – SOA008
– 8-lead SOIC (208 mil) – SOC008
– 8-contact USON 4 mm 4 mm – UNF008
– 8-contact WSON 5 mm 6 mm – WND008
– 24-ball BGA 6 mm 8 mm – FAB024 and FAC024
– KGD / KGW
– S25FL164K
– 8-lead SOIC (208 mil) – SOC008
– 16-lead SOIC (300 mil) – SO3016
– 8-contact WSON 5 mm 6 mm – WND008
– 24-ball BGA 6 mm 8 mm – FAB024 and FAC024
– KGD / KGW
Cypress Semiconductor Corporation • 198 Champion Court
Document Number: 002-00497 Rev. *E
• San Jose, CA 95134-1709 • 408-943-2600
Revised June 29, 2016









No Preview Available !

S25FL132K Даташит, Описание, Даташиты
Logic Block Diagram
CS#
SCK
SI/IO0
SO/IO1
WP#/IO2
HOLD#/IO3
I/O
S25FL116K, S25FL132K, S25FL164K
Control
Logic
Memory
Y Decoders
Data Latch
Data Path
Performance Summary
Maximum Read Rates (VCC = 2.7 V to 3.6 V, 85 °C/105 °C)
Command
Read
Fast Read
Dual Read
Quad Read
Typical Program and Erase Rates (VCC = 2.7 V to 3.6 V, 85 °C/105 °C)
Operation
Page Programming (256-byte page buffer)
4-kbyte Sector Erase
64-kbyte Sector Erase
Typical Current Consumption (VCC = 2.7 V to 3.6 V, 85 °C/105 °C)
Operation
Serial Read 50 MHz
Serial Read 108 MHz
Dual Read 108 MHz
Quad Read 108 MHz
Program
Erase
Standby
Deep-Power Down
Clock Rate (MHz)
50
108
108
108
Mbytes/s
6.25
13.5
27
54
kbytes/s
365
81
131
Current (mA)
7
12
14
16
20
20
0.015
0.002
Document Number: 002-00497 Rev. *E
Page 2 of 90









No Preview Available !

S25FL132K Даташит, Описание, Даташиты
S25FL116K, S25FL132K, S25FL164K
Contents
1. General Description..................................................... 4
1.1 Migration Notes.............................................................. 5
1.2 Glossary......................................................................... 6
1.3 Other Resources............................................................ 7
Hardware Interface
2. Signal Descriptions ..................................................... 8
2.1 Input / Output Summary................................................. 8
2.2 Address and Data Configuration.................................... 9
2.3 Serial Clock (SCK) ......................................................... 9
2.4 Chip Select (CS#) .......................................................... 9
2.5 Serial Input (SI) / IO0 ..................................................... 9
2.6 Serial Output (SO) / IO1................................................. 9
2.7 Write Protect (WP#) / IO2 .............................................. 9
2.8 HOLD# / IO3 ................................................................ 10
2.9 Core and I/O Signal Voltage Supply (VCC) .................. 10
2.10 Supply and Signal Ground (VSS) ................................. 10
2.11 Not Connected (NC) .................................................... 10
2.12 Reserved for Future Use (RFU)................................... 10
2.13 Do Not Use (DNU) ....................................................... 11
2.14 Block Diagrams............................................................ 11
3. Signal Protocols......................................................... 12
3.1 SPI Clock Modes ......................................................... 12
3.2 Command Protocol ...................................................... 12
3.3 Interface States............................................................ 16
3.4 Status Register Effects on the Interface ...................... 19
3.5 Data Protection ............................................................ 19
4. Electrical Characteristics .......................................... 20
4.1 Absolute Maximum Ratings ......................................... 20
4.2 Thermal Resistance ..................................................... 21
4.3 Operating Ranges........................................................ 21
4.4 DC Electrical Characteristics ....................................... 22
4.5 AC Measurement Conditions ....................................... 23
4.6 Power-Up Timing ......................................................... 24
4.7 Power-On (Cold) Reset................................................ 25
4.8 AC Electrical Characteristics......................................... 25
5. Physical Interface ....................................................... 30
5.1 Connection Diagrams ................................................... 30
5.2 Physical Diagrams ........................................................ 32
Software Interface
6. Address Space Maps .................................................. 39
6.1 Overview....................................................................... 39
6.2 Flash Memory Array...................................................... 39
6.3 Security Registers......................................................... 40
6.4 Security Register 0 — Serial Flash
Discoverable Parameters
(SFDP — JEDEC JESD216B) ...................................... 40
6.5 Status Registers ........................................................... 50
6.6 Device Identification...................................................... 60
7. Functional Description ............................................... 61
7.1 SPI Operations ............................................................. 61
7.2 Write Protection ............................................................ 62
7.3 Status Registers ........................................................... 62
8. Commands .................................................................. 63
8.1 Configuration and Status Commands ........................... 65
8.2 Program and Erase Commands ................................... 68
8.3 Read Commands .......................................................... 71
8.4 Reset Commands ......................................................... 76
8.5 ID and Security Commands .......................................... 77
8.6 Set Block / Pointer Protection
(39h) — S25FL132K and S25FL164K.......................... 82
9. Data Integrity ............................................................... 84
9.1 Erase Endurance .......................................................... 84
9.2 Data Retention .............................................................. 84
9.3 Initial Delivery State ...................................................... 84
10. Ordering Information .................................................. 85
11. Revision History.......................................................... 89
Document Number: 002-00497 Rev. *E
Page 3 of 90










Скачать PDF:

[ S25FL132K.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
S25FL132K3.0V SPI Flash MemoryCypress Semiconductor
Cypress Semiconductor
S25FL132KCMOS 3.0-Volt Flash Non-Volatile MemorySPANSION
SPANSION

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск