DataSheet26.com

CLAA170EA07Y PDF даташит

Спецификация CLAA170EA07Y изготовлена ​​​​«CHUNGHWA PICTURE TUBES» и имеет функцию, называемую «TFT-LCD».

Детали детали

Номер произв CLAA170EA07Y
Описание TFT-LCD
Производители CHUNGHWA PICTURE TUBES
логотип CHUNGHWA PICTURE TUBES логотип 

5 Pages
scroll

No Preview Available !

CLAA170EA07Y Даташит, Описание, Даташиты
Chunghwa Picture Tubes, Ltd.
Inspection Specification
To : YIH HSING ENTERPRISE CO.,LTD.
Date : 2004.08.23
CPT TFT-LCD
Incoming Inspection Standards
Model : CLAA170EA 07Y
ACCEPTED BY
APPROVED BY
CHECKED BY
PREPARED BY
Product Planning
Management General
Division
Prepared by : Product Planning Management General Division TFT Business Unit
CHUNGHWA PICTUER TUBES, LTD.
1127 Hopin Rd., Padeh, Taoyuan, Taiwan 334, R.O.C.
TEL: +886-3-3675151 FAX: +886-3-377-3001
Doc.No CLAA170EA 07Y-Yih Hsing-IIS-VER1-2004/08/23 Issue Date 2004/08/23









No Preview Available !

CLAA170EA07Y Даташит, Описание, Даташиты
CPT
Disallow Disclosure, Reproduction or Distribution
INCOMING INSPECTION STANDARDS
1. Incoming inspection right
(1) The Incoming Inspection Standard will be agreed and signed by both sides(Customer and CPT)
before CPT receives the PO(Purchase Order) forward 7days.
(2) The Customer shall notify CPT inspection result in writing within 14 day, otherwise goods will
be deemed accepted by customer.
2. Inspection conditions is as follows:
(1) Viewing distance is approximately 35 ~ 40 cm
(2) Viewing angle is normal to the LCD panel as Fig _1(10°)
(3) Ambient temperature is approximately 25 ± 5
(4) Ambient humidity is 60 ± 5% RH
(5) Ambient illuminance is from 300 ~ 500 Lux.
(6) Input signal timing should be typical value.
Fig _ 1
3. Special condition
(1) Viewing distance is close for inspection of adjacent dots and distance between defect dots.
(2) Viewing condition of “Shot block non-uniformity from oblique angle” is as Fig _2.
(3) Exceptional case: View angle ± 40° while inspected image-sticking.
CPT Confidential and Property
Fig _ 2
1/4 CLAA170EA 07Y-Yih Hsing-IIS-Ver1-2004/08/23









No Preview Available !

CLAA170EA07Y Даташит, Описание, Даташиты
CPT
Disallow Disclosure, Reproduction or Distribution
4. Inspection Criteria
DEFECT TYPE
LIMIT
Note
SCRATCH
0.03mm W 0.1mm
L 10mm
N4
-
VISUAL
DEFECT
INTERNAL
SPOT
FIBER
POLARIZER
BUBBLE
TOTAL
0.3mm
1.0mm
W 1.0mm, L 3.0mm
0.3mm
1.0mm
N 10
N5
N5
N5
Note1
Note1
Note1
-
BRIGHT DOT
N8
Note2
DARK DOT
N8
-
ELECTRICAL
DEFECT
TOTAL DOT
N 10
Note2
TWO ADJACENT DOT
3 PAIRS
Note3
THREE OR MORE
ADJACENT DOT
1 PAIRS
Note3
DISTANCE BETWEEN
DEFECT DOT
Two bright dots
10mm Note4
LINE DEFECT
NOT ALLOWED
-
One pixel consists of 3 sub-pixels, including R,G, and B dot.(Sub-pixel = Dot)
[Note1] W : Width[mm], L : Length[mm], N : Number, : Average Diameter
[Note2] Bright dot is defined through 5% transmission ND Filter as following.
CPT Confidential and Property
2/4 CLAA170EA 07Y-Yih Hsing-IIS-Ver1-2004/08/23










Скачать PDF:

[ CLAA170EA07Y.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
CLAA170EA07Display ModuleCHUNGHWA PICTURE TUBES
CHUNGHWA PICTURE TUBES
CLAA170EA07PDisplay ModuleCHUNGHWA PICTURE TUBES
CHUNGHWA PICTURE TUBES
CLAA170EA07PYDisplay ModuleCHUNGHWA PICTURE TUBES
CHUNGHWA PICTURE TUBES
CLAA170EA07QTFT LCDCHUNGHWA PICTURE TUBES
CHUNGHWA PICTURE TUBES

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск