|
|
PDF SECG1D0EC-S Data sheet ( Hoja de datos )
| Número de pieza | SECG1D0EC-S | |
| Descripción | LED | |
| Fabricantes | Sanken | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SECG1D0EC-S (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
LED Data Sheet - SECG1D0EC-S
SECG1D0EC-S
● External Shape Type ： 3.0×1.4 Flat View LED
● Color ： Green
● Lens color ： Clear
● Material of a chip ： InGsN
● Application ： Automotive, Consumer Electronics, Office Automation, Indicator
● Feature ： High Luminous Intensity, RoHS compliant,
Compatible with heat-resistance of lead-free solder.
●Rating
Description Symbol
Power dissipation
PD
Forward current
Forward current
reduction
Pulse forward
current
Reverse voltage
IF
⊿IF
IFP
VR
Operating temperature Topr
Storage temperature
Tstg
Ratings
120
30
-0.45
70
5
－30～ 85
－30～100
Unit
mW
mA
mA/℃
mA
V
℃
℃
Remark
Avobe25℃
f=1kHz
tw≦100μs
●Photoelectric characteristic (Ta=25℃)
Description Symbol
Conditions
Min Typ Max Unit
Forward voltage
VF
IF = 20mA
3.2 3.8 V
Reverse current
IR
VR = 5V
10 μA
Luminous intensity
IV
IF = 20mA
378 750
mcd
Dominant wavelength
λd
IF = 20mA
525 nm
Spectral bandwidth ⊿λ
IF = 20mA
35 nm
Directional angle
2θ1/2
IF = 20mA
120 deg.
●Luminous intensity rank (Ta=25℃)
rank
Luminous intensity
range(mcd)
C 378 ～ 572
D 468 ～ 822
E 672 ～ 1096
F 896 ～
●Dominant wavelength rank (Ta=25℃) Tolerance：±2nm
rank
Dominant Wavelengs
range(nm)
G 516 ～ 525
Y 525 ～ 534
SANKEN ELECTRIC COMPANY, LTD.
Page 1 / 11
1 page  
LED Data Sheet - SECG1D0EC-S
● Soldering conditions
Following soldering conditions are recommended.
① Reflow conditions（at the surface of LED resin）
Pre-heat ：150 ～ 180 ℃、60 ～ 120 sec
Soldering temperature： Soldering time more than 220℃ is less than 40 sec.
Peak temperature is should be is less than 260℃.
300
260
220
180
140
100
60
20
0
Reflow soldering profile
Peak Max 260℃
Pre-heat
60 ～ 120 sec
Max 40
sec
50 100 150 200 250
Soldering Time
300
② Manual soldering
Temperature of soldering iron tip should be 350±10℃ for 3 seconds, which shall apply to only one
soldered point and once for the each soldered point.
③ Recommendable soldering pattern
1.2
Unit：mm
SANKEN ELECTRIC COMPANY, LTD.
Page 5 / 11
5 Page 
LED Data Sheet - SECG1D0EC-S
● Tips
・The contents written in this data sheet may be changed without a preliminary announcement by improvement etc.
When you use it, please check that information is the newest and conclude specifications.
・Application and operation examples described in this publication are quoted for the sole purpose of reference
for the use of the products herein and Sanken can assume no responsibility for any infringement of industrial
property rights, intellectual property rights or any other rights of Sanken or any third party which may result
from its use.
・When using the products specified herein by either combining other products or materials therewith
or physically, chemically or otherwise processing or treating the products, please duly consider all possible
risks that may result from all such uses in advance and proceed therewith at your own responsibility.
・Although Sanken undertakes to enhance the quality and reliability of its products, the occurrence of failure
and defect of semiconductor products at a certain rate is inevitable.
Users of Sanken products are requested to take, at their own risk, preventative measures including safety
design of the equipment or systems against any possible injury, death, fires or damages to the society due to
device failure or malfunction.
・Sanken products listed in this catalog are designed and intended for the use as components in general purpose
electronic equipment or apparatus (home appliances, office equipment, telecommunication equipment measuring
equipment, etc.). Before placing an order, the user's written consent to the specifications is requested.
When considering the use of Sanken products in the applications where higher reliability is required
(transportation equipment and its control systems, traffic signal control systems or equipment, fire/crime alarm
systems, various safety devices, etc.), please contact your nearest Sanken sales representative to discuss and
obtain written confirmation of your specifications.
The use of Sanken products without the written consent of Sanken in the applications where extremely high
reliability is required (aerospace equipment, nuclear power control systems, life support systems, etc.)
is strictly prohibited.
・Anti radioactive ray design is not considered for the products listed herein.
・Gallium arsenic is used in some of the products listed in this document.
These products are dangerous if they are burned or smashed in the process of disposal.
It is also dangerous to drink the liquid or inhale the gas generated by such products when chemically disposed
・Sanken assumes no responsibility for any troubles, such as dropping products caused during transportation
out of Sanken’s distribution network.
・If there is any discrepancy between English and Japanese, the Japanese version should take precedence over
the English one.
SANKEN ELECTRIC COMPANY, LTD.
Page 11 / 11
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet SECG1D0EC-S.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SECG1D0EC-S | LED | Sanken |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |