DataSheet26.com

CD40193BMS PDF даташит

Спецификация CD40193BMS изготовлена ​​​​«Intersil Corporation» и имеет функцию, называемую «CMOS Presettable Up/Down Counters (Dual Clock With Reset)».

Детали детали

Номер произв CD40193BMS
Описание CMOS Presettable Up/Down Counters (Dual Clock With Reset)
Производители Intersil Corporation
логотип Intersil Corporation логотип 

12 Pages
scroll

No Preview Available !

CD40193BMS Даташит, Описание, Даташиты
December 1992
CD40192BMS
CD40193BMS
CMOS Presettable Up/Down Counters
(Dual Clock With Reset)
Features
Description
• CD40192BMS - BCD Type
• CD40193BMS - Binary Type
• High Voltage Type (20V Rating)
• Individual Clock Lines for Counting Up or Counting
Down
• Synchronous High-Speed Carry and Borrow Propaga-
tion Delays for Cascading
• Asynchronous Reset and Preset Capability
• Medium Speed Operation
- fCL = 8MHz (typ.) at 10V
• 5V, 10V and 15V Parametric Ratings
• Standardize Symmetrical Output Characteristics
• 100% Tested for Quiescent Current at 20V
• Maximum Input Current of 1µA at 18V Over Full Pack-
age Temperature Range; 100nA at 18V and +25oC
• Noise Margin (Over Full Package/Temperature Range)
- 1V at VDD = 5V
- 2V at VDD = 10V
- 2.5V at VDD = 15V
• Meets All Requirements of JEDEC Tentative Standard
No. 13B, “Standard Specifications for Description of
‘B’ Series CMOS Devices”
Applications
• Up/Down Difference Counting
• Multistage Ripple Counting
• Synchronous Frequency Dividers
• A/D and D/A Conversion
• Programmable Binary or BCD Counting
CD40192BMS Presettable BCD Up/Down Counter and the
CD40193BMS Presettable Binary Up/Down Counter each con-
sist of 4 synchronously clocked, gated “D” type flip-flops con-
nected as a counter. The inputs consist of 4 individual jam lines,
a PRESET ENABLE control, individual CLOCK UP and
CLOCK DOWN signals and a master RESET. Four buffered Q
signal outputs as well as CARRY and BORROW outputs for
multiple-stage counting schemes are provided.
The counter is cleared so that all outputs are in a low state by a
high on the RESET line. A RESET is accomplished asynchro-
nously with the clock. Each output is individually programmable
asynchronously with the clock to the level on the corresponding
jam input when the PRESET ENABLE control is low.
The counter counts up one count on the positive clock edge of
the CLOCK UP signal provided the CLOCK DOWN line is high.
The counter counts down one count on the positive clock edge
of the CLOCK DOWN signal provided the CLOCK UP line is
high.
The CARRY and BORROW signals are high when the counter
is counting up or down. The CARRY signal goes low one-half
clock cycle after the counter reaches its maximum count in the
count-up mode. The BORROW signal goes low one-half clock
cycle after the counter reaches its minimum count in the count-
down mode. Cascading of multiple packages is easily accom-
plished without the need for additional external circuitry by tying
the BORROW and CARRY outputs to the CLOCK DOWN and
CLOCK UP inputs, respectively, of the succeeding counter
package.
The CD40192BMS and CD40193BMS are supplied in these
16-lead outline packages:
Braze Seal DIP
Frit Seal DIP
Ceramic Flatpack
* CD40192B Only
*H4W, †H4X
H1F
*H6P, †H6W
†CD40193B Only
Pinout
CD40192BMS, CD40193BMS
TOP VIEW
J2 1
Q2 2
Q1 3
CLOCK DOWN 4
CLOCK UP 5
Q3 6
Q4 7
VSS 8
16 VDD
15 J1
14 RESET
13 BORROW
12 CARRY
11 PRESET ENABLE
10 J3
9 J4
Functional Diagram
PRESET
ENABLE
J1
J2
J3
J4
CLOCK UP
CLOCK DOWN
15
1
10
9
5
4
RESET
11
3
2
6
7
13
12
Q1
Q2
Q3
Q4
BORROW
CARRY
14 VDD = 16
VSS = 8
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
7-1419
File Number 3363









No Preview Available !

CD40193BMS Даташит, Описание, Даташиты
Specifications CD40192BMS, CD40193BMS
Absolute Maximum Ratings
DC Supply Voltage Range, (VDD) . . . . . . . . . . . . . . . -0.5V to +20V
(Voltage Referenced to VSS Terminals)
Input Voltage Range, All Inputs . . . . . . . . . . . . .-0.5V to VDD +0.5V
DC Input Current, Any One Input . . . . . . . . . . . . . . . . . . . . . . . .±10mA
Operating Temperature Range . . . . . . . . . . . . . . . . -55oC to +125oC
Package Types D, F, K, H
Storage Temperature Range (TSTG) . . . . . . . . . . . -65oC to +150oC
Lead Temperature (During Soldering) . . . . . . . . . . . . . . . . . +265oC
At Distance 1/16 ± 1/32 Inch (1.59mm ± 0.79mm) from case for
10s Maximum
Reliability Information
Thermal Resistance
θja
Ceramic DIP and FRIT Package . . . . . 80oC/W
θjc
20oC/W
Flatpack Package . . . . . . . . . . . . . . . . 70oC/W
20oC/W
Maximum Package Power Dissipation (PD) at +125oC
For TA = -55oC to +100oC (Package Type D, F, K) . . . . . . 500mW
For TA = +100oC to +125oC (Package Type D, F, K). . . . . . Derate
Linearity at 12mW/oC to 200mW
Device Dissipation per Output Transistor . . . . . . . . . . . . . . . 100mW
For TA = Full Package Temperature Range (All Package Types)
Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +175oC
TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS
PARAMETER
SYMBOL
CONDITIONS (NOTE 1)
GROUP A
SUBGROUPS TEMPERATURE
LIMITS
MIN MAX UNITS
Supply Current
IDD VDD = 20V, VIN = VDD or GND
1
+25oC
- 10 µA
2
+125oC
- 1000 µA
VDD = 18V, VIN = VDD or GND
3
-55oC
- 10 µA
Input Leakage Current
IIL VIN = VDD or GND VDD = 20V
1
+25oC
-100
-
nA
2
+125oC
-1000 -
nA
VDD = 18V
3
-55oC
-100
-
nA
Input Leakage Current
IIH VIN = VDD or GND VDD = 20V
1
+25oC
- 100 nA
2
+125oC
- 1000 nA
VDD = 18V
3
-55oC
- 100 nA
Output Voltage
VOL15 VDD = 15V, No Load
1, 2, 3
+25oC, +125oC, -55oC -
50 mV
Output Voltage
VOH15 VDD = 15V, No Load (Note 3)
1, 2, 3
+25oC, +125oC, -55oC 14.95
-
V
Output Current (Sink)
IOL5 VDD = 5V, VOUT = 0.4V
1
+25oC
0.53 - mA
Output Current (Sink)
IOL10 VDD = 10V, VOUT = 0.5V
1
+25oC
1.4 - mA
Output Current (Sink)
IOL15 VDD = 15V, VOUT = 1.5V
1
+25oC
3.5 - mA
Output Current (Source) IOH5A VDD = 5V, VOUT = 4.6V
1
+25oC
- -0.53 mA
Output Current (Source) IOH5B VDD = 5V, VOUT = 2.5V
1
+25oC
- -1.8 mA
Output Current (Source) IOH10 VDD = 10V, VOUT = 9.5V
1
+25oC
- -1.4 mA
Output Current (Source) IOH15 VDD = 15V, VOUT = 13.5V
1
+25oC
- -3.5 mA
N Threshold Voltage
VNTH VDD = 10V, ISS = -10µA
1
+25oC
-2.8 -0.7 V
P Threshold Voltage
VPTH VSS = 0V, IDD = 10µA
1
+25oC
0.7 2.8
V
Functional
F VDD = 2.8V, VIN = VDD or GND
VDD = 20V, VIN = VDD or GND
7
7
+25oC
+25oC
VOH > VOL < V
VDD/2 VDD/2
VDD = 18V, VIN = VDD or GND
8A
+125oC
VDD = 3V, VIN = VDD or GND
8B
-55oC
Input Voltage Low
(Note 2)
VIL VDD = 5V, VOH > 4.5V, VOL < 0.5V 1, 2, 3 +25oC, +125oC, -55oC -
1.5 V
Input Voltage High
(Note 2)
VIH VDD = 5V, VOH > 4.5V, VOL < 0.5V 1, 2, 3 +25oC, +125oC, -55oC 3.5
-
V
Input Voltage Low
(Note 2)
VIL VDD = 15V, VOH > 13.5V,
VOL < 1.5V
1, 2, 3
+25oC, +125oC, -55oC -
4V
Input Voltage High
(Note 2)
VIH VDD = 15V, VOH > 13.5V,
VOL < 1.5V
1, 2, 3
+25oC, +125oC, -55oC 11
-
V
NOTES: 1. All voltages referenced to device GND, 100% testing being 3. For accuracy, voltage is measured differentially to VDD. Limit
implemented.
is 0.050V max.
2. Go/No Go test with limits applied to inputs.
7-1420









No Preview Available !

CD40193BMS Даташит, Описание, Даташиты
Specifications CD40192BMS, CD40193BMS
TABLE 2. AC ELECTRICAL PERFORMANCE CHARACTERISTICS
PARAMETER
SYMBOL CONDITIONS (NOTES 1, 2)
Propagation Delay
Clock Up or Clock Down
to Q
TPHL1 VDD = 5V, VIN = VDD or GND
TPLH1
Propagation Delay
Reset to Q
TPHL2 VDD = 5V, VIN = VDD or GND
Propagation Delay
PE to Q
TPHL3 VDD = 5V, VIN = VDD or GND
TPLH3
Propagation Delay
Clock Up to Carry, Clock
Down to Borrow
Propagation Delay
PE to Borrow or Carry
TPHL4 VDD = 5V, VIN = VDD or GND
TPLH4
TPHL5 VDD = 5V, VIN = VDD or GND
TPLH5
Propagation Delay
TPHL6 VDD = 5V, VIN = VDD or GND
Reset to Borrow or Carry TPLH6
Transition Time
TTHL VDD = 5V, VIN = VDD or GND
TTLH
Maximum Clock Input
Frequency
FCL VDD = 5V, VIN = VDD or GND
GROUP A
SUBGROUPS TEMPERATURE
9 +25oC
10, 11
+125oC, -55oC
9
10, 11
9
10, 11
9
10, 11
+25oC
+125oC, -55oC
+25oC
+125oC, -55oC
+25oC
+125oC, -55oC
9
10, 11
9
10, 11
9
10, 11
9
10, 11
+25oC
+125oC, -55oC
+25oC
+125oC, -55oC
+25oC
+125oC, -55oC
+25oC
+125oC, -55oC
NOTES:
1. CL = 50pF, RL = 200K, Input TR, TF < 20ns.
2. -55oC and +125oC limits guaranteed, 100% testing being implemented.
LIMITS
MIN MAX
- 500
- 675
- 500
- 675
- 400
- 540
- 320
- 432
- 600
- 810
- 600
- 810
- 200
- 270
2-
1.48 -
UNITS
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
MHz
MHz
PARAMETER
Supply Current
Output Voltage
Output Voltage
Output Voltage
Output Voltage
Output Current (Sink)
Output Current (Sink)
Output Current (Sink)
TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS
SYMBOL
CONDITIONS
IDD VDD = 5V, VIN = VDD or GND
VDD = 10V, VIN = VDD or GND
VDD = 15V, VIN = VDD or GND
VOL VDD = 5V, No Load
VOL VDD = 10V, No Load
VOH VDD = 5V, No Load
VOH VDD = 10V, No Load
IOL5 VDD = 5V, VOUT = 0.4V
IOL10 VDD = 10V, VOUT = 0.5V
IOL15 VDD = 15V, VOUT = 1.5V
NOTES
1, 2
1, 2
1, 2
1, 2
1, 2
1, 2
1, 2
1, 2
1, 2
1, 2
TEMPERATURE
-55oC, +25oC
+125oC
-55oC, +25oC
+125oC
-55oC, +25oC
+125oC
+25oC, +125oC,
-55oC
+25oC, +125oC,
-55oC
+25oC, +125oC,
-55oC
+25oC, +125oC,
-55oC
+125oC
-55oC
+125oC
-55oC
+125oC
-55oC
LIMITS
MIN MAX
-5
- 150
- 10
- 300
- 10
- 600
- 50
- 50
4.95 -
9.95 -
0.36 -
0.64 -
0.9 -
1.6 -
2.4 -
4.2 -
UNITS
µA
µA
µA
µA
µA
µA
mV
mV
V
V
mA
mA
mA
mA
mA
mA
7-1421










Скачать PDF:

[ CD40193BMS.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
CD40193BM4-Bit Up/Down Binary CounterNational Semiconductor
National Semiconductor
CD40193BMSCMOS Presettable Up/Down Counters (Dual Clock With Reset)Intersil Corporation
Intersil Corporation

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск