OPB762T Datasheet PDF - TT electronics
| Part Number | OPB762T | |
| Description | Photologic Reflective Object Sensor | |
| Manufacturers | TT electronics | |
| Logo |  |
|
|
There is a preview and OPB762T download ( pdf file ) link at the bottom of this page. Total 7 Pages | ||
Preview 1 page No Preview Available !
Photologic® Reflective Object
Sensor
OPB760, OPB761, OPB762, OPB763 (Series N and T)
OPB770, OPB771, OPB772, OPB773 (Series NZ and TZ)
Features:
• Choice of mounting configurations
• Choice of four output configurations
• .040” (10.160 mm) PCBoard mount (N and T series)
• 12” (304.800 mm) AWG 26 wires (NZ and TZ series)
OPB760N
OPB775TZ
Description:
The OPB760N, OPB760T, OPB770N and OPB770T series of reflec ve assemblies feature Photologic® output. The electrical
output can be specified as either TTL Totem-Pole or TTL Open-Collector, either of which can be supplied with inverter or
buffer output polarity.
OPB760N and OPB760T series devices are designed for PCBoard moun ng and have 0.04” (10 mm) long leads.
OPB760T and OPB770T series devices are designed for remote moun ng with two moun ng tabs.
OPB770NZ and OPB770TZ series devices have 12” (305 mm) long, UL approved 26 AWG wires.
All devices in this series offer the added stability of a built-in hysteresis amplifier.
Custom electrical, wire and cabling and connectors are available. Contact your local representa ve or OPTEK for more
informa on.
Applications:
• Non-contact Photologic®
reflective object sensor
• Assembly line automation
• Machine automation
• Machine safety
• End of travel sensor
• Door sensor
Ordering Information
Part LED Peak
Sensor
Reflection Distance
Number Wavelength Photologic® (Inch) Min / Max
Mounting
OPB760N
Totem-Pole
OPB761N
Open Collector
OPB762N
OPB763N
OPB760T
OPB761T
Inv-Totem-Pole
Inv-Open Collector
Totem-Pole
Open Collector
PCBoard .40”
(10.160 mm)
leads)
OPB762T
Inv-Totem-Pole
OPB763T
Inv-Open Collector
OPB770NZ 890 nm
Totem-Pole
0.080" / 0.220”
OPB771NZ
Open Collector
OPB772NZ
Inv-Totem-Pole
OPB773NZ
OPB770TZ
Inv-Open Collector
Totem-Pole
12” (304.800 mm)
26 AWG wire
OPB771TZ
Open Collector
OPB772TZ
Inv-Totem-Pole
OPB773TZ
Inv-Open Collector
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
© TT electronics plc
RoHS
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.ttelectronics.com
Issue C 05/2016 Page 1
|
| |
 
Photologic® Reflective Object
Sensor
OPB760, OPB761, OPB762, OPB763 (Series N and T)
OPB770, OPB771, OPB772, OPB773 (Series NZ and TZ)
Electrical Specifications
Electrical Characteristics (TA = 25°C unless otherwise noted)
SYMBOL
PARAMETER
Output Photologic® Sensor (continued)
IF(+)
IF(+)/IF(-)
IOS
LED Positive-Going Threshold Current(2)
Hysteresis(2)
Short Circuit Output Current:
Buffered Totem-Pole Output(1)
Inverted Totem-Pole Output(1)
Low Level Output Voltage:
Buffered Totem-Pole Output(1)(4)
VOL Buffered Open-Collector Output(1)(4)
Inverted Totem-Pole Output
Inverted Open-Collector Output(1)(4)
High Level Output Voltage:
Buffered Totem-Pole Output(1)
VOH Inverted Totem-Pole Output(1)(4)
Inverted Totem-Pole Output (3)
Inverted Open-Collector Output(3)
MIN TYP MAX UNITS
TEST CONDITIONS
- - 25 mA Vcc = 5 V, TA = 25° C
1.1 - 2.0
- Vcc = 5 V
-15 - -100 mA If = 25 mA, Vcc = 5.25 V, Output = GRD
-15 - -100 mA If = 0 mA, Vcc = 5.25 V, Output = GRD
- - 0.4
- - 0.4
- - 0.4
- - 0.4
2.4 -
2.4 -
2.4 -
2.4 -
-
-
-
-
V VCC = 4.5 V, IOL = 12.8 mA, IF = 0 mA or IF =
V 30 mA
V
V
VCC = 4.5 V, IOL = 12.8 mA, IF = 25 mA
V VCC = 4.5 V, IOH = -800 μA, IF = 25 mA
V VCC = 4.5 V, IOH = -800 μA, IF = 0 mA
V
V
VCC = 4.5 V, IOH = -800 μA, IF = 30 mA
Notes:
(1) Tested at d = 0.080” (mm) from a 90% diffuse white test surface.
(2) Tested at d = 0.080” (mm), 0.150” (mm) and 0.220” (mm) from a 90% diffuse white test surface. Reference: Eastman Kodak,
Catalog #E 152 7795.
(3) Tested at d = 0.080” (mm), 0.150” (mm) and 0.220” (mm) from a 5% diffuse black test surface.
(4) Normal application would be with light source blocked, simulated by IF=0 mA.
(5) OPB760N through OPB763N series devices are terminated with 0.20” (mm) square leads designed for printed PCBoard mounting.
(6) OPB770NZ through OPB773NZ series devices are terminated with 12 inches (mm) of 7-strand 26 AWG UL1429 insulated wire on
each terminal. A standard AMP No. 640442-5 connector has been attached to the lead wires to ease connection to wire
harnesses.
(7) OPB760T through OPB763T series devices are terminated with 0.020” (mm) square leads designed for printed PCBoard
mounting.
(8) OPB770TZ through OPB773TZ series are terminated with 12” (mm) of 7-strand 26 AWG UL1429 insulated wire on each terminal.
A standard AMP No. 640442-5 connector has been attached to the lead wires to ease connection to wire harnesses.
(9) All parameters tested using pulse technique.
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
© TT electronics plc
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.ttelectronics.com
Issue C 05/2016 Page 5
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for OPB762T electronic component. |
| Information | Total 7 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ OPB762T.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| OPB762 | The function is Photologic Reflective Object Sensor. TT electronics | |
| OPB762N | The function is Photologic Reflective Object Sensor. TT electronics | |
| OPB762N | The function is Photologic Reflective Object Sensors. OPTEK Technologies |  |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
OPB7
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||