|
|
PDF CLAA070NJ01CW Data sheet ( Hoja de datos )
| Número de pieza | CLAA070NJ01CW | |
| Descripción | TFT LCD | |
| Fabricantes | CHUNGHWA PICTURE TUBES | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de CLAA070NJ01CW (archivo pdf) en la parte inferior de esta página. Total 18 Páginas | ||
|
No Preview Available !
EQ
Chunghwa Picture Tubes, Ltd.
Product Specification
To : Data-Modul
Date : 120808
TFT LCD
CLAA070NJ01CW
ACCEPTED BY :
V 0.2
APPROVED BY
CHECKED BY
PREPARED BY
Prepared by :
Product Planning Management Division
Consumer Electronic Business Unit
CHUNGHWA PICTURE TUBES, LTD.
1127 Hopin Rd., Padeh, Taoyuan, Taiwan 334, R.O.C.
TEL: +886-3-3675151 FAX: +886-3-377-3858
Doc.No: SPEC_CLAA070NJ01CW_V0.2_Data-Modul_120808
Issue Date: 2012/07/23
1 page  
CPT
CHUNGHWA PICTURE TUBES, LTD.,
2. ABSOLUTE MAXIMUM RATINGS
The following are maximun values which, if exceeded, may cause faulty operation or damage
to the unit.
Item
Digital Supply Voltage
Analog Supply Voltage
Gate On Voltage
Gate Off Voltage
Gate On-Gate Off Voltage
Signal Input Voltage
Forward Current per LED
Reverse Voltage per LED
Pulse Forward Ccurrent Per LED
Operating Temperature
StorageTemperature
Symbol
DVDD
DVDD_LVDS
AVDD
VGH
VGL
VGH-VGL
NIND0 ~ NIND3
PIND0 ~ PIND3
NINC,PINC
If
VR
Ifp
Topa
Tstg
Min.
-0.3
-0.5
-0.3
-20
12
-0.5
-
-
-
-20
-30
Max.
3.96
14.85
40
0.3
40
5
30
5
100
70
80
Unit
V
V
V
V
V
V
mA
V
mA
Note1 Ifp Conditions Pulse Width 10msec Duty 1/10
Note2 perating must under the condition as below drawing.
(Ambient Temperature /Allowable Forward Current) Each LED .
Note
Note 1 2
Note 3
Note 3
Note3 If users use the product out off the environmemtal operation range temperature and humidity, it will
have visual quality concerns.
CPT Confidential
5/18
SPEC_CLAA070NJ01CW_V0.2_Data-Modul_120808
5 Page 
CPT
CHUNGHWA PICTURE TUBES, LTD.,
4. INTERFACE CONNECTION
4.1 CN1 (Input Signal)
Pin No. SYMBOL
FUNCTION
1 VCOM Common Voltage
2 DVDD Digital Power
3 DVDD Digital Power
4 NC Not Connect
Global reset pin. Active low to enter reset state.
5 RESET Suggest to connecting with an RC reset circuit for stability.
Normally pull high. (R=10KΩ C=0.1µF)
Standby mode, normally pull high
6 STBYB STBYB=”1”, normal operation
STBYB=”0”,timing control, source driver will turn off, all output are high-Z
7 GND Ground
8 NIND0 Negative LVDS differential data input
9 PIND0 Positive LVDS differential data input
10 GND Ground
11 NIND1 Negative LVDS differential data input
12 PIND1 Positive LVDS differential data input
13 GND Ground
14 NIND2 Negative LVDS differential data input
15 PIND2 Positive LVDS differential data input
16 GND Ground
17 NINC Negative LVDS differential clock input
18 PINC Positive LVDS differential clock input
19 GND Ground
20 NIND3 Negative LVDS differential data input
21 PIND3 Positive LVDS differential data input
22 GND Ground
23 NC Not Connect
24 NC Not Connect
25 GND Ground
26 NC Not Connect
27 NC Not Connect
28 SELB 6bit/8bit Mode Select
29 AVDD Power for Analog Circuit
30 GND Ground
31 LED- LED Cathode
32 LED- LED Cathode
33 SHLR Horizontal Inversion
34 UPDN Vertical Inversion
35 VGL Negative Power for TFT
36 NC Not Connect
37 NC Not Connect
38 VGH Positive Power for TFT
39 LED+ LED Anode
40 LED+ LED Anode
Remarks
*1)if LVDS input data is 6bits,SELB must must be set to High
if LVDS input data is 8bit , SELB must be set to Low
Remark
*1)
*2)
*2)
CPT Confidential
11/18
SPEC_CLAA070NJ01CW_V0.2_Data-Modul_120808
11 Page | ||
| Páginas | Total 18 Páginas | |
| PDF Descargar | [ Datasheet CLAA070NJ01CW.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| CLAA070NJ01CW | TFT LCD | CHUNGHWA PICTURE TUBES |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |