|
|
PDF HMC1021LP4E Data sheet ( Hoja de datos )
| Número de pieza | HMC1021LP4E | |
| Descripción | RMS POWER DETECTOR & ENVELOPE TRACKER | |
| Fabricantes | Hittite | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HMC1021LP4E (archivo pdf) en la parte inferior de esta página. Total 24 Páginas | ||
|
No Preview Available !
v02.0511
HMC1021LP4E
RMS POWER DETECTOR &
ENVELOPE TRACKER, DC - 3.9 GHz
11
11 - 1
Typical Applications
The HMC1021LP4E is ideal for:
• Log –> Root-Mean-Square (RMS) Conversion
• Tx/Rx Signal Strength Indication (TSSI/RSSI)
• RF Power Amplifier Efficiency Control
• Receiver Automatic Gain Control
• Transmitter Power Control
• Envelope Tracking
• PA Linearization
Features
Broadband Single-Ended RF Input
RMS Detector with ±1 dB Detection
Accuracy to 3.9 GHz
Input Dynamic Range: -62 dBm to +8 dBm
±1 dB Envelope Detection Accuracy over
20 dB Input Range
Envelope Detection Bandwidth > 150MHz
Digitally Programmable Integration Bandwidth
Power-Down Mode
24 Lead 4x4mm SMT Package: 16mm²
Functional Diagram
General Descriptions
The HMC1021LP4E is an RMS power detector with
an integrated high bandwidth envelope detector. The
RMS output is a temperature compensated, monoton-
ic, linear-in-dB representation of real RF signal power,
measured over an input sensing range of 70 dB. The
envelope detector provides an accurate voltage output
which is linearly proportional to the envelope ampli-
tude of the RF input signal for modulation bandwidths
up to 150 MHz. The high bandwidth envelope detec-
tion of the HMC1021LP4E makes it ideal for detecting
broadband and high crest factor RF signals commonly
used in CDMA2000, WCDMA, and LTE systems. Ad-
ditionally, the instantaneous envelope output can be
used to create fast, excessive RF power protection,
PA linearization, and efficiency enhancing envelope-
tracking PA implementations.
The HMC1021LP4E’s RMS detector integration band-
width is digitally programmable via input pins SCI1-4
over a range of more than 4 decades. This allows the
user to dynamically set the operation bandwidth and
also permits the detection of different types of modula-
tions on the same platform.
Electrical Specifications I
The HMC1021LP4E features an internal op-amp at the
RMS output stage, which accommodates slope and
intercept adjustments and supports a wide range of
applications.
TA = +25 °C, Vcc = 5V, Sci4 = Sci1 = 0V, Sci3 = Sci2 = 5V, Unless Otherwise Noted
Parameter
Typ. Typ. Typ. Typ. Typ. Typ.
Typ. Units
Dynamic Range (±1dB Error) [1]
Input Frequency
RMSOUT Output
ETOUT Output
100
900
1900
2200
2700
3500
3900 MHz
71 71 70 69 68 64 60 dB
18 19 20 19 20 19 19 dB
Deviation vs Temperature: (Over full temperature range -40 °C to 85 °C).
Deviation is measured from reference, which is the same WCDMA input at 25 °C.
1 dB
[1] With WCDMA 4 Carrier (TM1-64 DPCH)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
1 page  
v02.0511
HMC1021LP4E
RMS POWER DETECTOR &
ENVELOPE TRACKER, DC - 3.9 GHz
11
11 - 5
RMSOUT & Error vs. Pin @ 3900 MHz [1][2]
3.2 4
2.8
ERR +25C
3
ERR +85C
2.4
ERR -40C
2
21
1.6 0
1.2 -1
0.8
Ideal
-2
LOGOUT +25C
0.4
LOGOUT +85C
LOGOUT -40C
-3
0 -4
-70 -60 -50 -40 -30 -20 -10 0
10
INPUT POWER (dBm)
RMSOUT Slope vs. Frequency [1][2]
50
45
40
+25C
+85C
-40C
35
30
0
1000
2000
3000
FREQUENCY (MHz)
4000
RMSOUT Error vs. Pin with WCDMA 4
Carrier @ +25 °C [1]
4
3
2
1
0
-1 100MHz
900MHz
-2 1900MHz
2200MHz
-3
2700MHz
3500MHz
3900MHz
-4
-70 -60 -50 -40 -30 -20 -10 0 10
INPUT POWER (dBm)
RMSOUT Intercept vs. Frequency [1][2]
-50
-55
-60
+25C
+85C
-40C
-65
-70
-75
-80
0
1000
2000
3000
FREQUENCY (MHz)
4000
RMSOUT vs. Pin with WCDMA
4 Carrier @ +25 °C [1]
3
2.5
100MHz
900MHz
1900MHz
2200MHz
2
2700MHz
3500MHz
3900MHz
1.5
1
0.5
0
-70 -60 -50 -40 -30 -20 -10
INPUT POWER (dBm)
0
10
RMSOUT Error vs. Pin with WCDMA 4
Carrier @ +85 °C wrt +25 °C Response [1]
4
3 100MHz
900MHz
2
1900MHz
2200MHz
2700MHz
1
3500MHz
3900MHz
0
-1
-2
-3
-4
-70 -60 -50 -40 -30 -20 -10 0 10
INPUT POWER (dBm)
[1] Data was taken at Sci4=Sci1=0V, Sci3=Sci2=5V, shortest integration time is for SCI=0000, allowed longest integration time is for SCI=1100
[2] WCDMA 4 carriers input waveform
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
5 Page 
Pin Descriptions
Pin Number
Function
v02.0511
HMC1021LP4E
RMS POWER DETECTOR &
ENVELOPE TRACKER, DC - 3.9 GHz
Description
Interface Schematic
11
1, 16, 21, 23
Vcc
Bias Supply. Connect supply voltage to these pins
with appropriate filtering.
2, 5, 8, 11, 12,
13, 22, 24
GND
Package bottom has an exposed metal paddle that
must be connected to RF/DC ground.
3 ,4 INP, INN
RF input pins
6
ETOUT
Linear output that provides an indication of
envelope of the input signal.
11 - 11
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
11 Page | ||
| Páginas | Total 24 Páginas | |
| PDF Descargar | [ Datasheet HMC1021LP4E.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HMC1021LP4E | RMS POWER DETECTOR & ENVELOPE TRACKER | Hittite |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |