|
|
Número de pieza | HMC953LC4B | |
Descripción | DUAL D-TYPE FLIP-FLOP | |
Fabricantes | Hittite Microwave | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HMC953LC4B (archivo pdf) en la parte inferior de esta página. Total 9 Páginas | ||
No Preview Available ! HMC953LC4B
v03.0914
14 Gbps, DUAL D-TYPE FLIP-FLOP WTH COMMON CLOCK
& PROGRAMMABLE OUTPUT VOLTAGE
Typical Applications
The HMC953LC4B is ideal for:
• 16G Fiber Channel
• Serial Data Transmission up to 14 Gbps
• Digital Logic Systems up to 14 GHz
• Matched Delay Applications
• Broadband Test & Measurement
Features
Supports High Data Rates: up to 14 Gbps
Differential or Single-Ended Operation
Fast Rise and Fall Times: 22 / 20 ps
Low Power Consumption: 442 mW typ.
Programmable Differential
Output Voltage Swing: 600 - 1300 mVp-p
Propagation Delay: 104 ps
Single Supply: -3.3 V
24 Lead Ceramic 4x4 mm SMT Package: 16 mm2
Functional Diagram
General Description
The HMC953LC4B is a Differential Dual D-Type Flip
Flop with a common clock to support data transmission
rates of up to 14 Gbps, and clock port operation of up
to 14 GHz. During normal operation, dual differential
data is transferred to the respective outputs on the
positive edge of the clock. Reversing the clock inputs
allows for negative-edge triggered applications. The
HMC953LC4B also features an output level control
pin, VR, which allows for loss compensation or for
signal level optimization.
All differential input signals to the HMC953LC4B are
terminated with 50 Ohms to ground on-chip, and
may be either AC or DC coupled. The outputs of the
HMC953LC4B may be operated either differentially
or single-ended. Outputs can be connected directly
to a 50 Ohm terminated system, while DC blocking
capacitors may be used if the terminating system is
50 Ohms to a non-ground DC voltage. The HMC-
953LC4B operates from a single -3.3 V DC supply
and is available in a ceramic RoHS-compliant 4x4 mm
SMT package.
Electrical Specifications, TA = +25 °C, Vee = -3.3 V
Parameter
Power Supply Voltage
Power Supply Current
Maximum Data Rate
Maximum Select Rate
Input Voltage Range
Input Differential Range
Input Return Loss
Output Amplitude
Conditions
Min.
-3.6
Frequency <11 GHz
Single-Ended, peak-to-peak
Differential, peak-to-peak
-1.5
0.1
Typ.
-3.3
134
14
14
10
580
1160
Max
-3.0
0.5
2.0
Units
V
mA
Gbps
GHz
V
Vp-p
dB
mVp-p
mVp-p
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
1
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
1 page HMC953LC4B
v03.0914
14 Gbps, DUAL D-TYPE FLIP-FLOP WTH COMMON CLOCK
& PROGRAMMABLE OUTPUT VOLTAGE
Eye Diagram
[1] Test Conditions:
Waveform generated with an Agilent N4903A
J-Bert differential 400 mV 13 Gbps PN 215-1 input signal.
Eye Diagram data presented on a Tektronix CSA 8000
Timing Diagram
Truth Table
Inputs
D1 D2
LX
HX
XL
XH
H = Positive voltage level
L = Negative voltage level
Notes:
DX = DXP - DXN
C = CP - CN
QX = QXP - QXN
C
L->H
L->H
L->H
L->H
Outputs
Q1 Q2
LX
HX
XL
XH
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
4
5 Page |
Páginas | Total 9 Páginas | |
PDF Descargar | [ Datasheet HMC953LC4B.PDF ] |
Número de pieza | Descripción | Fabricantes |
HMC953LC4B | DUAL D-TYPE FLIP-FLOP | Hittite Microwave |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |