|
|
PDF HMC862ALP3E Data sheet ( Hoja de datos )
| Número de pieza | HMC862ALP3E | |
| Descripción | 0.1 - 15 GHZ LOW NOISE PROGRAMMABLE DIVIDER | |
| Fabricantes | Hittite Microwave | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HMC862ALP3E (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
|
No Preview Available !
HMC862ALP3E
v00.0615
0.1 - 15 GHZ LOW NOISE PROGRAMMABLE
DIVIDER (N =1, 2 ,4, 8)
Typical Applications
The HMC862ALP3E is ideal for:
• Satellite Communication Systems
• Point-to-Point & Point-to-Multi-Point Radios
• Military Applications
• Test Equipment
Functional Diagram
Features
Low Noise Floor: -153 dBc/Hz at 100 kHz offset
Programmable Frequency Divider, N = 1, 2, 4, 8
Wide Bandwidth: 100 MHz to 15 GHz
16 Lead 3X3 mm SMT Package: 9mm2
General Description
The HMC862ALP3E is a low current, low noise
programmable frequency divider in a 3x3 mm
leadless surface mount package. The divider can be
programmed to divide from N=1, 2, 4, 8 in the 100
MHz to 15 GHz input frequency range. The low phase
OPJTF
XJEF GSFRVFODZ SBOHF BOE áFYJCMF EJWJTJPO
ratio make this device ideal for high performance and
wide band communication systems.
& MFDUSJDBM4QFDJàDBUJPOT
TA = +25° C, Vcc1 = Vcc2 = +5V
Parameter
Conditions
Min. Typ. Max.
Units
RF Input Characteristics
Max RF Input Frequency
Min RF Input Frequency
RF Input Power Range (N = 1)
RF Input Power Range (N = 2, 4, 8)
Sine Wave or Square Wave Input
Sine Wave or Square Wave Input [1]
Sine Wave or Square Wave Input [1] [2] Fin < 8 GHz
Sine Wave or Square Wave Input [1] [2] Fin > 8 GHz
Sine Wave or Square Wave Input [1]
15
-10
-10
-10
GHz
0.1 GHz
10 dBm
0 dBm
10 dBm
Divider Output Characteristics
Output Power (N = 1)
(see the Pout plot for N = 1) [2]
-2 to +3
dBm
Output Power (N = 2, 4, 8)
(see the Pout plots for each division ratio)
2 dBm
Divider Ratio N
1, 2, 4, 8
SSB Phase Noise @ 100 kHz Offset
Fin = 6 GHz, Pin = 0 dBm, N = 2
-153
dBc/Hz
Logic Inputs
VIH Input High Voltage
3 5V
VIL Input Low Voltage
0 0.4 V
Power Supplies
Vcc
Analog Supply
4.75 5 5.25
V
Current Consumption
N = 1, S0 = L, S1 = L, S2 = L
44 mA
N = 2, S0 = H, S1 = L, S2 = L
49 mA
Icc
N = 4, S0 = H, S1 = H, S2 = L
52 mA
N = 8, S0 = H, S1 = H, S2 = H
54 mA
Control Bits
3 Bit
[1] Square wave input waveform is recommended below 400 MHz for best phase noise performance. If sine wave input waveform is used below
400 MHz, it is recommended that power input is > +5 dBm for best operation including phase noise performance.
[2] For N = 1, frequencies > 8 GHz, and input power > 0 dBm, output power will saturate and gradually drop with increasing input power, but
part will continue to function.
For price, delivery and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
1
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
1 page  
HMC862ALP3E
v00.0615
0.1 - 15 GHZ LOW NOISE PROGRAMMABLE
DIVIDER (N =1, 2 ,4, 8)
Pin Description
Pin Number
1, 4, 8, 9,
12, 14, 15
2
3
Function
GND
IN
NIN
5, 6, 7
S0, S1, S2
10
11
13, 16
NOUT
OUT
Vcc1, Vcc2
Description
Ground: Backside of package has exposed metal ground slug which must be
connected to RF/DC ground.
RF Input must be DC blocked.
RF Input 180° out of phase with pin 2 for differential operation. AC ground for
single ended operation. DC block for differential operation.
CMOS compatible division ratio control bit.
See Programming Truth Table
Divider output 180° out of phase with pin 11.
RF output must be DC blocked.
Divided Output. RF output must be DC blocked.
Supply voltage 5V. Connect both pins to +5V supply.
For price, delivery and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
4
5 Page | ||
| Páginas | Total 7 Páginas | |
| PDF Descargar | [ Datasheet HMC862ALP3E.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HMC862ALP3E | 0.1 - 15 GHZ LOW NOISE PROGRAMMABLE DIVIDER | Hittite Microwave |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |