|
|
Número de pieza | HMC859LC3 | |
Descripción | DIVIDE-BY-8 WITH RESET & PROGRAMMABLE OUTPUT VOLTAGE | |
Fabricantes | Analog Devices | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HMC859LC3 (archivo pdf) en la parte inferior de esta página. Total 9 Páginas | ||
No Preview Available ! HMC859LC3
v02.0914
26 GHz, DIVIDE-BY-8 WITH RESET &
PROGRAMMABLE OUTPUT VOLTAGE
Typical Applications
The HMC859LC3 is ideal for:
• High Speed Frequency Divider (up to 26 GHz)
• Clock Synthesis
• Phase Locked Loops
• Broadband Test & Measurement
Features
Supports Clock Frequencies up to 26 GHz
Differential or Single-Ended Operation
Fast Rise and Fall Times: 19 / 17 ps
Low Power Consumption: 320 mW typ.
Programmable Differential
Output Voltage Swing: 800 - 1900 mVp-p
Propagation Delay: 146 ps
Single Supply: -3.3 V
16 Lead Ceramic 3x3 mm SMT Package: 9 mm2
Functional Diagram
General Description
The HMC859LC3 is a Divide-by-8 w/Reset desig-
ned to support clock frequencies as high as 26
GHz. During normal operation, with the reset pin not
asserted, the output toggles from its prior state on
the positive edge of the clock. Asserting the reset
pin forces the Q output low regardless of the clock
edge state (asynchronous reset assertion). Reversing
the clock inputs allows for negative-edge triggered
applications.
All differential inputs to the HMC859LC3 are CML and
terminated on-chip with 50 Ohms to the positive supply,
GND, and may be DC or AC coupled. Outputs can be
connected directly to a 50 Ohm ground-terminated
system or drive devices with CML logic input. the
HMC859LC3 also features an ouput level control pin,
VR, which allows for loss compensation or signal level
optimization. The HMC859LC3 operates from a single
-3.3 V supply and is available in ROHS-compliant 3x3
mm SMT package.
Electrical Specifications, TA = +25 ºC Vee = -3.3 V, VR = 0 V
Parameter
Conditions
Min.
Power Supply Voltage
-3.6
Power Supply Current
Maximum Clock Rate
Input Voltage Range
-1.5
Input Differential Range
Input Return Loss
Output Amplitude
Frequency <25 GHz
Single-Ended, peak-to-peak
Differential, peak-to-peak
0.1
Output High Voltage
Output Low Voltage
Typ.
-3.3
97
26
10
825
1650
-15
-840
Max
-3.0
0.5
2.0
Units
V
mA
GHz
V
Vp-p
dB
mVp-p
mVp-p
mV
mV
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
1
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
1 page Output Waveform
HMC859LC3
v02.0914
26 GHz, DIVIDE-BY-8 WITH RESET &
PROGRAMMABLE OUTPUT VOLTAGE
[1] Test Conditions:
Waveform generated with a CW signal source input at 28 GHz.
Diagram data presented on a Tektronix CSA 8000.
Timing Diagram
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
4
5 Page |
Páginas | Total 9 Páginas | |
PDF Descargar | [ Datasheet HMC859LC3.PDF ] |
Número de pieza | Descripción | Fabricantes |
HMC859LC3 | DIVIDE-BY-8 WITH RESET & PROGRAMMABLE OUTPUT VOLTAGE | Analog Devices |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |