|
|
Número de pieza | NJG1168PCD | |
Descripción | GPS Front-End Module | |
Fabricantes | New Japan Radio | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de NJG1168PCD (archivo pdf) en la parte inferior de esta página. Total 20 Páginas | ||
No Preview Available ! NJG1168PCD
GPS Front-End Module
GENERAL DESCRIPTION
The NJG1168PCD is a front-end module (FEM) designed for GPS
applications. Its ultra-low current consumption is particularly suitable for
wearable devices. This FEM offers high gain, low noise figure, high linearity
and very high out-band rejection characteristics brought by included high
performance pre- SAW filter, low noise amplifier (LNA) and post- SAW filter.
This FEM offers very small mounting area by included two SAW filters, only
two external components and very small package HFFP10-CD.
PACKAGE OUTLINE
NJG1168PCD
FEATURES
Low supply voltage
1.8 / 2.8V typ.
Ultra-low current consumption
High gain
Low noise figure
1.8 / 2.4mA typ. @VDD=1.8 / 2.8V, VCTL=1.8V
0.1μA typ.
@VDD=1.8 / 2.8V, VCTL=0V (Stand-by mode)
17.0 / 18.0dB typ.@VDD=1.8 / 2.8V, VCTL=1.8V, f=1575MHz
1.70 / 1.65dB typ.@VDD=1.8 / 2.8V, VCTL=1.8V, f=1575MHz
High rejection
83.5dBc typ. @f=704 to 915MHz, relative to 1575MHz
70.5dBc typ. @f=1710 to 1980MHz, relative to 1575MHz
76.5dBc typ. @f=1526 to 1536MHz, 1627 to 1680MHz,
relative to 1575MHz
Small package size
HFFP10-CD: 2.5mmx2.5mm (typ.), t= 0.63mm (max.)
RoHS compliant and Halogen Free, MSL1
PIN CONFIGURATION
(Top View)
1
Post-Fi l te r
GND
VCTL
2
VDD LNA
3
NC(GND)
4
PreIN
5
Pre-Filter
BLOCK DIAGRAM
10
PostOUT
NC (GND)
9
LNAIN
8
PreOUT
7
GND
6
Pin connection
1. GND
2. VCTL
3. VDD
4. NC(GND)
5. PreIN
6. GND
7. PreOUT
8. LNAIN
9. NC(GND)
10. PostOUT
RF IN
Exposed pad: GND
Pre-Filter
VCTL
VDD
LNA
Post-Filter RF OUT
TRUTH TABLE
“H”=VCTL(H), “L”=VCTL(L)
VCTL
Mode
H Active mode
L Stand-by mode
Note: Specifications and description listed in this datasheet are subject to change without notice.
Ver.2017-02-02
-1-
1 page NJG1168PCD
TERMINAL INFORMATION
No. SYMBOL
DESCRIPTION
1
GND
Ground terminal. This terminal should be connected to the ground plane as
close as possible for excellent RF performance.
2 VCTL Control voltage terminal.
3
VDD
Supply voltage terminal. Please connect bypass capacitor C1 with ground as
close as possible.
4
NC(GND)
No connected terminal. This terminal is not connected with internal circuit.
Please connect to the PCB ground Plane.
5 PreIN RF input terminal. This terminal connects to input of pre-SAW filter.
6
GND
Ground terminal. This terminal should be connected to the ground plane as close
as possible for excellent RF performance.
7 PreOUT Pre-SAW filter output terminal. This terminal connects to LNAIN with L1.
8
9
10
Exposed
Pad
LNAIN
RF input terminal. This terminal requires only a matching inductor L1, and
does not require DC blocking capacitor because of integrated capacitor.
NC(GND)
PostOUT
GND
No connected terminal. This terminal is not connected with internal circuit.
Please connect to the PCB ground Plane.
RF output terminal. This terminal requires no DC blocking capacitor since this
terminal has integrated SAW that also works as DC blocking capacitor in
nature.
Ground terminal. This terminal should be connected to the ground plane as close
as possible for excellent RF performance.
-5-
5 Page NJG1168PCD
ELECTRICAL CHARACTERISTICS
Conditions: VDD=1.8V, VCTL=1.8V, Ta=25°C, Zs=Zl=50, with application circuit
Out-of-band P-1dB (fjam=900MHz)
(VDD=1.8V, VCTL=1.8V, f =1575MHz at Pin=-40dBm)
meas
22
20
18
Gain
16
14
12
10
8
P-1dB(IN)_OB > +24.0dBm
(Gain: Exclude PCB, Connector Losses)
6
-40 -30 -20 -10 0
10 20
Pin at 900MHz (dBm)
30
Out-of-band IIP2
(V =1.8V, V =1.8V, f =1575.4MHz,
DD CTL meas
120 f1=824.6MHz, f2=2400MHz)
100
80
60
40
Pout
20
0
-20
-40
-60
-80
-100
-40
-20
IM2
IIP2_OB=+82.7dBm
0 20 40 60
Pin (dBm)
80
100
2nd Harmonics
(V =1.8V, V =1.8V,
DD CTL
fin=787.76MHz, f =1575.52MHz)
0 meas
-20
2fo=-42.7dBm
-40
-60
-80
-100
-120
-30 -20 -10 0 10 20 30
Pin(dBm)
Out-of-band P-1dB (fjam=1710MHz)
(VDD=1.8V, VCTL=1.8V, f =1575MHz at Pin=-40dBm)
22 meas
20
18
Gain
16
14
12
10
8 P-1dB(IN)_OB > +24.0dBm
(Gain: Exclude PCB, Connector Losses)
6
-40 -30 -20 -10 0
10 20
Pin at 1710MHz (dBm)
30
Out-of-band IIP3
(VDD=1.8V, VCTL=1.8V, fmeas=1575.4MHz,
f1=1712.7MHz, f2=1850MHz)
80
60
40
20
0 Pout
-20
-40
-60 IM3
-80
-100
-40
-20
IIP3_OB=+56.4dBm
0 20 40 60
Pin (dBm)
- 11 -
11 Page |
Páginas | Total 20 Páginas | |
PDF Descargar | [ Datasheet NJG1168PCD.PDF ] |
Número de pieza | Descripción | Fabricantes |
NJG1168PCD | GPS Front-End Module | New Japan Radio |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |