DataSheet26.com

S29GL128S PDF даташит

Спецификация S29GL128S изготовлена ​​​​«Cypress Semiconductor» и имеет функцию, называемую «3.0V GL-S Flash Memory».

Детали детали

Номер произв S29GL128S
Описание 3.0V GL-S Flash Memory
Производители Cypress Semiconductor
логотип Cypress Semiconductor логотип 

30 Pages
scroll

No Preview Available !

S29GL128S Даташит, Описание, Даташиты
S29GL01GS, S29GL512S
S29GL256S, S29GL128S
1 Gbit (128 Mbyte), 512 Mbit (64 Mbyte),
256 Mbit (32 Mbyte), 128 Mbit (16 Mbyte),
3.0V GL-S Flash Memory
General Description
The Cypress® S29GL01G/512/256/128S are MirrorBit® Eclipse flash products fabricated on 65 nm process technology. These
devices offer a fast page access time as fast as 15 ns with a corresponding random access time as fast as 90 ns. They feature a
Write Buffer that allows a maximum of 256 words/512 bytes to be programmed in one operation, resulting in faster effective
programming time than standard programming algorithms. This makes these devices ideal for today’s embedded applications that
require higher density, better performance and lower power consumption.
Distinctive Characteristics
CMOS 3.0 Volt Core with Versatile I/O
65 nm MirrorBit Eclipse Technology
Single supply (VCC) for read / program / erase (2.7V to 3.6V)
Versatile I/O Feature
– Wide I/O voltage range (VIO): 1.65V to VCC
x16 data bus
Asynchronous 32-byte Page read
512-byte Programming Buffer
– Programming in Page multiples, up to a maximum of 512
bytes
Single word and multiple program on same word options
Automatic Error Checking and Correction (ECC) – internal
hardware ECC with single bit error correction
Sector Erase
– Uniform 128-kbyte sectors
Suspend and Resume commands for Program and Erase
operations
Status Register, Data Polling, and Ready/Busy pin methods
to determine device status
Advanced Sector Protection (ASP)
– Volatile and non-volatile protection methods for each
sector
Separate 1024-byte One Time Program (OTP) array with two
lockable regions
Common Flash Interface (CFI) parameter table
Temperature Range / Grade
– Industrial (-40°C to +85°C)
– Industrial Plus(-40°C to +105°C)
– Automotive, AEC-Q100 Grade 3 (-40 °C to +85 °C)
– Automotive, AEC-Q100 Grade 2 (-40 °C to +105 °C)
100,000 Program / Erase Cycles
20 Years Data Retention
Packaging Options
– 56-pin TSOP
– 64-ball LAA Fortified BGA, 13 mm x 11 mm
– 64-ball LAE Fortified BGA, 9 mm x 9 mm
– 56-ball VBU Fortified BGA, 9 mm x 7 mm
Cypress Semiconductor Corporation • 198 Champion Court
Document Number: 001-98285 Rev. *K
• San Jose, CA 95134-1709 • 408-943-2600
Revised November 10, 2016









No Preview Available !

S29GL128S Даташит, Описание, Даташиты
S29GL01GS, S29GL512S
S29GL256S, S29GL128S
Performance Summary
Density
128 Mb
256 Mb
512 Mb
1 Gb
Voltage Range
Full VCC= VIO
VersatileIO VIO
Full VCC= VIO
VersatileIO VIO
Full VCC= VIO
VersatileIO VIO
Full VCC= VIO
VersatileIO VIO
Maximum Read Access Times
Random Access
Time (tACC)
90
Page Access Time
(tPACC)
15
100 25
90 15
100 25
100 15
110 25
100 15
110 25
CE# Access Time
(tCE)
90
100
90
100
100
110
100
110
OE# Access Time
(tOE)
25
35
25
35
25
35
25
35
Typical Program and Erase Rates
Buffer Programming
(512 bytes)
1.5 MB/s
Sector Erase (128 kbytes)
477 kB/s
Maximum Current Consumption
Active Read at 5 MHz, 30 pF
60 mA
Program
100 mA
Erase
100 mA
Standby
100 µA
Document Number: 001-98285 Rev. *K
Page 2 of 107









No Preview Available !

S29GL128S Даташит, Описание, Даташиты
S29GL01GS, S29GL512S
S29GL256S, S29GL128S
Contents
1. Product Overview ........................................................ 4
Software Interface
2. Address Space Maps ................................................... 6
2.1 Flash Memory Array....................................................... 7
2.2 Device ID and CFI (ID-CFI) ASO ................................... 8
2.3 Device ID and Common Flash Interface
(ID-CFI) ASO Map — Automotive Only ......................... 9
2.4 Status Register ASO.................................................... 10
2.5 Data Polling Status ASO.............................................. 10
2.6 Secure Silicon Region ASO ......................................... 10
2.7 Sector Protection Control............................................. 11
2.8 ECC Status ASO.......................................................... 11
3. Data Protection .......................................................... 13
3.1 Device Protection Methods .......................................... 13
3.2 Command Protection ................................................... 13
3.3 Secure Silicon Region (OTP)....................................... 13
3.4 Sector Protection Methods........................................... 14
4. Read Operations ........................................................ 19
4.1 Asynchronous Read..................................................... 19
4.2 Page Mode Read ......................................................... 19
5. Embedded Operations............................................... 20
5.1 Embedded Algorithm Controller (EAC) ........................ 20
5.2 Program and Erase Summary ..................................... 21
5.3 Automatic ECC ............................................................ 22
5.4 Command Set .............................................................. 23
5.5 Status Monitoring ......................................................... 34
5.6 Error Types and Clearing Procedures ......................... 40
5.7 Embedded Algorithm Performance Table.................... 43
6. Data Integrity .............................................................. 54
6.1 Erase Endurance ......................................................... 54
6.2 Data Retention ............................................................. 54
7. Software Interface Reference ................................... 55
7.1 Command Summary .................................................... 55
7.2 Device ID and Common Flash Interface
(ID-CFI) ASO Map ....................................................... 58
Hardware Interface
8. Signal Descriptions ................................................... 64
8.1 Address and Data Configuration.................................. 64
8.2 Input/Output Summary................................................. 64
8.3 Versatile I/O Feature..................................................... 65
8.4 Ready/Busy# (RY/BY#) ................................................ 65
8.5 Hardware Reset ............................................................ 65
9. Signal Protocols.......................................................... 66
9.1 Interface States............................................................. 66
9.2 Power-Off with Hardware Data Protection .................... 66
9.3 Power Conservation Modes.......................................... 67
9.4 Read ............................................................................. 67
9.5 Write ............................................................................. 68
10. Electrical Specifications............................................. 69
10.1 Absolute Maximum Ratings .......................................... 69
10.2 Latchup Characteristics ................................................ 69
10.3 Thermal Resistance ...................................................... 69
10.4 Operating Ranges......................................................... 69
10.5 DC Characteristics ........................................................ 72
10.6 Capacitance Characteristics ......................................... 74
11. Timing Specifications................................................. 75
11.1 Key to Switching Waveforms ........................................ 75
11.2 AC Test Conditions ....................................................... 75
11.3 Power-On Reset (POR) and Warm Reset .................... 76
11.4 AC Characteristics ........................................................ 78
12. Physical Interface ....................................................... 90
12.1 56-Pin TSOP................................................................. 90
12.2 64-Ball FBGA ................................................................ 92
12.3 56-Ball FBGA ................................................................ 95
13. Special Handling Instructions
for FBGA Package ...................................................... 96
14. Ordering Information .................................................. 97
15. Other Resources ....................................................... 102
15.1 Cypress Flash Memory Roadmap .............................. 102
15.2 Links to Software ........................................................ 102
15.3 Links to Application Notes........................................... 102
16. Revision History........................................................ 103
Sales, Solutions, and Legal Information .........................107
Worldwide Sales and Design Support ..........................107
Products .......................................................................107
PSoC® Solutions .........................................................107
Cypress Developer Community ....................................107
Technical Support ........................................................107
Document Number: 001-98285 Rev. *K
Page 3 of 107










Скачать PDF:

[ S29GL128S.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
S29GL128MMirrorBit Flash FamilyETC
ETC
S29GL128M3.0V single power Flash memorySPANSION
SPANSION
S29GL128NMirrorBit Flash FamilyETC
ETC
S29GL128N3.0V single power flash memoryCypress Semiconductor
Cypress Semiconductor

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск