DataSheet26.com

S34ML04G1 PDF даташит

Спецификация S34ML04G1 изготовлена ​​​​«Cypress Semiconductor» и имеет функцию, называемую «3V SLC NAND Flash».

Детали детали

Номер произв S34ML04G1
Описание 3V SLC NAND Flash
Производители Cypress Semiconductor
логотип Cypress Semiconductor логотип 

30 Pages
scroll

No Preview Available !

S34ML04G1 Даташит, Описание, Даташиты
Distinctive Characteristics
Density
– 1 Gb/ 2 Gb / 4 Gb
Architecture
– Input / Output Bus Width: 8-bits / 16-bits
– Page size:
– x8 = 2112 (2048 + 64) bytes; 64 bytes is spare area
– x16 = 1056 (1024 + 32) words; 32 words is spare area
– Block size: 64 Pages
– x8 = 128 KB + 4 KB
– x16 = 64k + 2k words
– Plane size:
– 1 Gb / 2 Gb: 1024 Blocks per Plane
x8 = 128 MB + 4 MB
x16 = 64M + 2M words
– 4 Gb: 2048 Blocks per Plane
x8 = 256 MB+ 8 MB
x16 = 128M + 4M words
– Device size:
– 1 Gb: 1 Plane per Device or 128 MB
– 2 Gb: 2 Planes per Device or 256 MB
– 4 Gb: 2 Planes per Device or 512 MB
Performance
Page Read / Program
– Random access: 25 µs (Max)
– Sequential access: 25 ns (Min)
– Program time / Multiplane Program time: 200 µs (Typ)
Block Erase (S34ML01G1)
– Block Erase time: 2.0 ms (Typ)
Block Erase / Multiplane Erase (S34ML02G1, S34ML04G1)
– Block Erase time: 3.5 ms (Typ)
S34ML01G1
S34ML02G1, S34ML04G1
1 Gb, 2 Gb, 4 Gb, 3 V SLC
NAND Flash For Embedded
NAND flash interface
– Open NAND Flash Interface (ONFI) 1.0 compliant
– Address, Data and Commands multiplexed
Supply voltage
– 3.3-V device: Vcc = 2.7 V ~ 3.6 V
Security
– One Time Programmable (OTP) area
– Hardware program/erase disabled during power transition
Additional features
– 2 Gb and 4 Gb parts support Multiplane Program and Erase
commands
– Supports Copy Back Program
– 2 Gb and 4 Gb parts support Multiplane Copy Back Program
– Supports Read Cache
Electronic signature
– Manufacturer ID: 01h
Operating temperature
– Industrial: -40 °C to 85 °C
– Automotive: -40 °C to 105 °C
Reliability
– 100,000 Program / Erase cycles (Typ)
(with 1 bit ECC per 528 bytes (x8) or 264 words (x16))
– 10 Year Data retention (Typ)
– For one plane structure (1-Gb density)
– Block zero is valid and will be valid for at least 1,000 program-
erase cycles with ECC
– For two plane structures (2-Gb and 4-Gb densities)
– Blocks zero and one are valid and will be valid for at least
1,000 program-erase cycles with ECC
Package options
– Lead Free and Low Halogen
– 48-Pin TSOP 12 x 20 x 1.2 mm
– 63-Ball BGA 9 x 11 x 1 mm
Cypress Semiconductor Corporation • 198 Champion Court
Document Number: 002-00676 Rev. *S
• San Jose, CA 95134-1709 • 408-943-2600
Revised Wednesday, August 31, 2016









No Preview Available !

S34ML04G1 Даташит, Описание, Даташиты
S34ML01G1
S34ML02G1, S34ML04G1
Contents
Distinctive Characteristics .................................................. 1
Performance.......................................................................... 1
1. General Description..................................................... 4
1.1 Logic Diagram................................................................ 5
1.2 Connection Diagram ...................................................... 6
1.3 Pin Description............................................................... 7
1.4 Block Diagram................................................................ 8
1.5 Array Organization ......................................................... 9
1.6 Addressing ................................................................... 10
1.7 Mode Selection ............................................................ 13
2. Bus Operation ............................................................ 13
2.1 Command Input ........................................................... 13
2.2 Address Input............................................................... 13
2.3 Data Input .................................................................... 14
2.4 Data Output.................................................................. 14
2.5 Write Protect ................................................................ 14
2.6 Standby........................................................................ 14
3. Command Set............................................................. 15
3.1 Page Read ................................................................... 16
3.2 Page Program.............................................................. 16
3.3 Multiplane Program — S34ML02G1 and S34ML04G1 17
3.4 Page Reprogram — S34ML02G1 and S34ML04G1.... 18
3.5 Block Erase.................................................................. 19
3.6 Multiplane Block Erase — S34ML02G1 and S34ML04G1
20
3.7 Copy Back Program..................................................... 20
3.8 EDC Operation — S34ML02G1 and S34ML04G1....... 21
3.9 Read Status Register................................................... 23
3.10 Read Status Enhanced — S34ML02G1 and S34ML04G1
23
3.11 Read Status Register Field Definition .......................... 24
3.12 Reset............................................................................ 24
3.13 Read Cache ................................................................. 24
3.14 Cache Program............................................................ 25
3.15 Multiplane Cache Program — S34ML02G1 and
S34ML04G1................................................................. 26
3.16 Read ID........................................................................ 27
3.17 Read ID2...................................................................... 29
3.18 Read ONFI Signature .................................................. 29
3.19 Read Parameter Page ................................................. 30
3.20 One-Time Programmable (OTP) Entry ........................ 32
4. Signal Descriptions ................................................... 32
4.1 Data Protection and Power On / Off Sequence ........... 32
4.2 Ready/Busy.................................................................. 33
4.3 Write Protect Operation ............................................... 34
5. Electrical Characteristics .......................................... 35
5.1 Valid Blocks ................................................................. 35
5.2 Absolute Maximum Ratings ......................................... 35
5.3 Recommended Operating Conditions.......................... 35
5.4 AC Test Conditions ...................................................... 35
5.5 AC Characteristics ....................................................... 36
5.6 DC Characteristics ....................................................... 37
5.7 Pin Capacitance............................................................ 37
5.8 Program / Erase Characteristics ................................... 38
6. Timing Diagrams......................................................... 38
6.1 Command Latch Cycle.................................................. 38
6.2 Address Latch Cycle ..................................................... 39
6.3 Data Input Cycle Timing................................................ 39
6.4 Data Output Cycle Timing (CLE=L, WE#=H, ALE=L,
WP#=H) ........................................................................ 40
6.5 Data Output Cycle Timing (EDO Type, CLE=L, WE#=H,
ALE=L).......................................................................... 40
6.6 Page Read Operation ................................................... 41
6.7 Page Read Operation (Interrupted by CE#).................. 42
6.8 Page Read Operation Timing with CE# Don’t Care...... 43
6.9 Page Program Operation .............................................. 43
6.10 Page Program Operation Timing with CE# Don’t Care. 44
6.11 Page Program Operation with Random Data Input ...... 44
6.12 Random Data Output In a Page ................................... 45
6.13 Multiplane Page Program Operation — S34ML02G1 and
S34ML04G1.................................................................. 45
6.14 Block Erase Operation .................................................. 46
6.15 Multiplane Block Erase — S34ML02G1 and S34ML04G1
47
6.16 Copy Back Read with Optional Data Readout .............. 48
6.17 Copy Back Program Operation With Random Data Input..
48
6.18 Multiplane Copy Back Program — S34ML02G1 and
S34ML04G1.................................................................. 49
6.19 Read Status Register Timing ........................................ 50
6.20 Read Status Enhanced Timing ..................................... 51
6.21 Reset Operation Timing ................................................ 51
6.22 Read Cache .................................................................. 52
6.23 Cache Program............................................................. 54
6.24 Multiplane Cache Program — S34ML02G1 and
S34ML04G1.................................................................. 55
6.25 Read ID Operation Timing ............................................ 57
6.26 Read ID2 Operation Timing .......................................... 57
6.27 Read ONFI Signature Timing........................................ 58
6.28 Read Parameter Page Timing ...................................... 58
6.29 OTP Entry Timing ......................................................... 59
6.30 Power On and Data Protection Timing ......................... 59
6.31 WP# Handling............................................................... 60
7. Physical Interface ....................................................... 61
7.1 Physical Diagram .......................................................... 61
8. System Interface ......................................................... 63
9. Error Management ...................................................... 65
9.1 System Bad Block Replacement................................... 65
9.2 Bad Block Management................................................ 66
10. Ordering Information .................................................. 67
11. Document History Page ............................................. 68
Document Number: 002-00676 Rev. *S
Page 2 of 73









No Preview Available !

S34ML04G1 Даташит, Описание, Даташиты
S34ML01G1
S34ML02G1, S34ML04G1
1. General Description
The Cypress S34ML01G1, S34ML02G1, and S34ML04G1 series is offered with a 3.3-V VCC power supply, and with ×8 or ×16 I/O
interface. Its NAND cell provides the most cost-effective solution for the solid state mass storage market. The memory is divided into
blocks that can be erased independently so it is possible to preserve valid data while old data is erased. The page size for ×8 is
(2048 + 64 spare) bytes; for ×16 (1024 + 32) words.
Each block can be programmed and erased up to 100,000 cycles with ECC (error correction code) on. To extend the lifetime of
NAND flash devices, the implementation of an ECC is mandatory.
The chip supports CE# don't care function. This function allows the direct download of the code from the NAND flash memory device
by a microcontroller, since the CE# transitions do not stop the read operation.
The devices have a Read Cache feature that improves the read throughput for large files. During cache reading, the devices load
the data in a cache register while the previous data is transferred to the I/O buffers to be read.
Like all other 2-kB page NAND flash devices, a program operation typically writes 2112 bytes (×8), or 1056 words (×16) in 200 µs
and an erase operation can typically be performed in 2 ms (S34ML01G1) on a 128-kB block (×8) or 64-kword block (×16). In
addition, thanks to multiplane architecture, it is possible to program two pages at a time (one per plane) or to erase two blocks at a
time (again, one per plane). The multiplane architecture allows program time to be reduced by 40% and erase time to be reduced by
50%.
In multiplane operations, data in the page can be read out at 25 ns cycle time per byte. The I/O pins serve as the ports for command
and address input as well as data input/output. This interface allows a reduced pin count and easy migration towards different
densities, without any rearrangement of the footprint.
Commands, Data, and Addresses are asynchronously introduced using CE#, WE#, ALE, and CLE control pins.
The on-chip Program/Erase Controller automates all read, program, and erase functions including pulse repetition, where required,
and internal verification and margining of data. A WP# pin is available to provide hardware protection against program and erase
operations.
The output pin R/B# (open drain buffer) signals the status of the device during each operation. It identifies if the program/erase/read
controller is currently active. The use of an open-drain output allows the Ready/Busy pins from several memories to connect to a
single pull-up resistor. In a system with multiple memories the
R/B# pins can be connected all together to provide a global status signal.
The Reprogram function allows the optimization of defective block management — when a Page Program operation fails the data
can be directly programmed in another page inside the same array section without the time consuming serial data insertion phase.
The Copy Back operation automatically executes embedded error detection operation: 1-bit error out of every 528 bytes (×8) or 256
words (×16) can be detected. With this feature it is no longer necessary to use an external mechanism to detect Copy Back
operation errors.
Multiplane Copy Back is also supported. Data read out after Copy Back Read (both for single and multiplane cases) is allowed.
In addition, Cache Program and Multiplane Cache Program operations improve the programing throughput by programing data
using the cache register.
The devices provide two innovative features: Page Reprogram and Multiplane Page Reprogram. The Page Reprogram re-programs
one page. Normally, this operation is performed after a failed Page Program operation. Similarly, the Multiplane Page Reprogram re-
programs two pages in parallel, one per plane. The first page must be in the first plane while the second page must be in the second
plane. The Multiplane Page Reprogram operation is performed after a failed Multiplane Page Program operation. The Page
Reprogram and Multiplane Page Reprogram guarantee improved performance, since data insertion can be omitted during re-
program operations.
Note: The S34ML01G1 device does not support EDC.
Document Number: 002-00676 Rev. *S
Page 3 of 73










Скачать PDF:

[ S34ML04G1.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
S34ML04G13V SLC NAND FlashCypress Semiconductor
Cypress Semiconductor
S34ML04G1(S34ML01G1 - S34ML04G1) SLC NAND Flash MemorySpansion
Spansion
S34ML04G2NAND Flash MemoryCypress Semiconductor
Cypress Semiconductor

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск