DataSheet26.com

SAM4S16B PDF даташит

Спецификация SAM4S16B изготовлена ​​​​«ATMEL Corporation» и имеет функцию, называемую «SMART ARM-based Flash MCU».

Детали детали

Номер произв SAM4S16B
Описание SMART ARM-based Flash MCU
Производители ATMEL Corporation
логотип ATMEL Corporation логотип 

30 Pages
scroll

No Preview Available !

SAM4S16B Даташит, Описание, Даташиты
SAM4S Series
Atmel | SMART ARM-based Flash MCU
DATASHEET
Description
The Atmel® | SMART SAM4S series is a member of a family of Flash
microcontrollers based on the high-performance 32-bit ARM® Cortex®-M4 RISC
processor. It operates at a maximum speed of 120 MHz and features up to
2048 Kbytes of Flash, with optional dual-bank implementation and cache
memory, and up to 160 Kbytes of SRAM. The peripheral set includes a full-speed
USB Device port with embedded transceiver, a high-speed MCI for
SDIO/SD/MMC, an External Bus Interface featuring a Static Memory Controller to
connect to SRAM, PSRAM, NOR Flash, LCD Module and NAND Flash, 2
USARTs, 2 UARTs, 2 TWIs, 3 SPIs, an I2S, as well as a PWM timer, two 3-
channel general-purpose 16-bit timers (with stepper motor and quadrature
decoder logic support), an RTC, a 12-bit ADC, a 12-bit DAC and an analog
comparator.
The SAM4S series is ready for capacitive touch, offering native support for the
Atmel QTouch® library for easy implementation of buttons, wheels and sliders.
The Atmel | SMART SAM4S devices have three software-selectable low-power
modes: Sleep, Wait and Backup. In Sleep mode, the processor is stopped while
all other functions can be kept running. In Wait mode, all clocks and functions are
stopped but some peripherals can be configured to wake up the system based on
predefined conditions. In Backup mode, only the low-power RTC and wakeup
logic are running.
The real-time event management allows peripherals to receive, react to and send
events in Active and Sleep modes without processor intervention.
The SAM4S device is a medium-range general-purpose microcontroller with the
best ratio in terms of reduced power consumption, processing power and
peripheral set. This enables the SAM4S to sustain a wide range of applications
that includes consumer, industrial control, and PC peripherals.
SAM4S devices operate from 1.62V to 3.6V.
The SAM4S series is pin-to-pin compatible with the SAM3N, SAM3S series (48-,
64- and 100-pin versions), SAM4N and SAM7S legacy series (64-pin versions).
Atmel-11100K-ATARM-SAM4S-Datasheet_09-Jun-15









No Preview Available !

SAM4S16B Даташит, Описание, Даташиты
Features
Core
̶ ARM Cortex-M4 with 2 Kbytes of cache running at up to 120 MHz
̶ Memory Protection Unit (MPU)
̶ DSP Instruction Set
̶ Thumb®-2 instruction set
Pin-to-pin compatible with SAM3N, SAM3S, SAM4N and SAM7S legacy products (64-pin version)
Memories
̶ Up to 2048 Kbytes embedded Flash with optional dual-bank and cache memory, ECC, Security Bit and Lock
Bits
̶ Up to 160 Kbytes embedded SRAM
̶ 16 Kbytes ROM with embedded boot loader routines (UART, USB) and IAP routines
̶ 8-bit Static Memory Controller (SMC): SRAM, PSRAM, NOR and NAND Flash support
System
̶ Embedded voltage regulator for single supply operation
̶ Power-on-Reset (POR), Brown-out Detector (BOD) and Watchdog for safe operation
̶ Quartz or ceramic resonator oscillators: 3 to 20 MHz main power with failure detection and optional low-power
32.768 kHz for RTC or device clock
̶ RTC with Gregorian and Persian calendar mode, waveform generation in low-power modes
̶ RTC counter calibration circuitry compensates for 32.768 kHz crystal frequency inaccuracy
̶ High-precision 8/12 MHz factory-trimmed internal RC oscillator with 4 MHz default frequency for device startup,
in-application trimming access for frequency adjustment
̶ Slow clock internal RC oscillator as permanent low-power mode device clock
̶ Two PLLs up to 240 MHz for device clock and for USB
̶ Temperature sensor
̶ Low-power tamper detection on two inputs, anti-tampering by immediate clear of general-purpose backup
registers (GPBR)
̶ Up to 22 Peripheral DMA (PDC) channels
Low-power Modes
̶ Sleep, Wait and Backup modes; consumption down to 1 µA in Backup mode
Peripherals
̶ USB 2.0 Device: 12 Mbps, 2668 byte FIFO, up to 8 bidirectional Endpoints, on-chip transceiver
̶ Up to two USARTs with ISO7816, IrDA®, RS-485, SPI, Manchester and Modem Mode
̶ Two 2-wire UARTs
̶ Up to two 2-Wire Interface modules (I2C-compatible), one SPI, one Serial Synchronous Controller (I2S), one
high-speed Multimedia Card Interface (SDIO/SD Card/MMC)
̶ Two 3-channel 16-bit Timer Counters with capture, waveform, compare and PWM mode, Quadrature decoder
logic and 2-bit Gray up/down counter for stepper motor
̶ 4-channel 16-bit PWM with complementary output, fault input, 12-bit dead time generator counter for motor
control
̶ 32-bit Real-time Timer and RTC with calendar, alarm and 32 kHz trimming features
̶ 256-bit General Purpose Backup Registers (GPBR)
̶ Up to 16-channel, 1Msps ADC with differential input mode and programmable gain stage and auto calibration
̶ One 2-channel 12-bit 1Msps DAC
̶ One Analog Comparator with flexible input selection, selectable input hysteresis
̶ 32-bit Cyclic Redundancy Check Calculation Unit (CRCCU) for data integrity check of off-/on-chip memories
̶ Register Write Protection
2 SAM4S Series [DATASHEET]
Atmel-11100K-ATARM-SAM4S-Datasheet_09-Jun-15









No Preview Available !

SAM4S16B Даташит, Описание, Даташиты
I/O
̶ Up to 79 I/O lines with external interrupt capability (edge or level sensitivity), debouncing, glitch filtering and on-
die series resistor termination
̶ Three 32-bit Parallel Input/Output Controllers, Peripheral DMA-assisted Parallel Capture mode
Packages
̶ 100-lead packages
LQFP – 14 x 14 mm, pitch 0.5 mm
TFBGA – 9 x 9 mm, pitch 0.8 mm
VFBGA – 7 x 7 mm, pitch 0.65 mm
̶ 64-lead packages
LQFP – 10 x 10 mm, pitch 0.5 mm
QFN – 9 x 9 mm, pitch 0.5 mm
WLCSP – 4.42 x 4.72 mm, pitch 0.4 mm (SAM4SD32/SAM4SD16)
WLCSP – 4.42 x 3.42 mm, pitch 0.4 mm (SAM4S16/S8)
WLCSP – 3.32 x 3.32 mm, pitch 0.4 mm (SAM4S4/S2)
̶ 48-lead packages
LQFP – 7 x 7 mm, pitch 0.5 mm
QFN – 7 x 7 mm, pitch 0.5 mm
SAM4S Series [DATASHEET]
Atmel-11100K-ATARM-SAM4S-Datasheet_09-Jun-15
3










Скачать PDF:

[ SAM4S16B.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
SAM4S16BSMART ARM-based Flash MCUATMEL Corporation
ATMEL Corporation
SAM4S16CSMART ARM-based Flash MCUATMEL Corporation
ATMEL Corporation

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск