|
|
PDF NL9654HL06-01J Data sheet ( Hoja de datos )
| Número de pieza | NL9654HL06-01J | |
| Descripción | LCD Module | |
| Fabricantes | NEC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NL9654HL06-01J (archivo pdf) en la parte inferior de esta página. Total 28 Páginas | ||
|
No Preview Available !
TFT COLOR LCD MODULE
NL9654HL06-01J
6.8cm (2.7 Type)
QHD
DATA SHEET
DOD-PP-0818 (1st edition)
All information is subject to change without notice.
Please confirm the sales representative before
starting to design your system.
Document Number: DOD-PP-0818 (1st edition)
Published date: June 2009 CP(N)
1 © NEC LCD Technologies, Ltd.
2009 All rights reserved.
1 page  
NL9654HL06-01J
2. GENERAL SPECIFICATIONS
Display area
59.04 (H) × 33.21 (V) mm
Diagonal size of display 6.8 cm (2.7 inches)
Drive system
LTPS TFT active matrix
Display color
Pixel
16,777,216 colors
960 (H) × 540 (V) pixels
Pixel arrangement
Dot pitch
Pixel pitch
Module size
Weight
RGB (Red dot, Green dot, Blue dot) vertical stripe
0.0205 (H) × 0.0615 (V) mm
0.0615 (H) × 0.0615 (V) mm
69.0 (H) × 50.8 (V) × 3.6 (D) mm (typ.)
[Excluding FPC]
26 g (typ.)
Polarizer surface
Clear
Polarizer pencil-hardness
Designed viewing direction
Luminance
Contrast ratio
Response time
Signal system
Supply voltage
Power consumption
3 H (min.) [by JIS K5400]
• Viewing direction without image reversal: lower side (6 o'clock)
• Viewing direction with contrast peak: up side (12 o'clock)
At IL= 14 mA/LED
300cd/m2 (typ.)
At IL= 14 mA/LED
500:1 (typ.)
Ton + Toff (10% ←→ 90%)
14.5 ms (typ.)
8-bit digital signals for data of RGB colors,
Dot clock (CLK), Horizontal synchronous signal (HSYNC),
Vertical synchronous signal (VSYNC),
Serial interface (SPI correspondence ) (/CS, SCL, SI, SO)
VCCIO: 3.0V (typ.)
VCC: 3.0V (typ.)
VDD: 6.5V (typ.)
LCD panel + Driver: 256 mW (typ.)
Backlight:
518 mW (typ., at IL= 14 mA/LED)
DATA SHEET DOD-PP-0818 (1st edition)
5
5 Page 
NL9654HL06-01J
4.5 SETTING OF THE INTERNAL REGISTER
Initially, the internal register of driver is undefined. Therefore, the following procedure is required. After
initialization is done by the /REST pin, the register must be written using /CS, SCL and SI pins. To check
or confirm the written register data, you can read it using SO pin. The setting method is as follows.
(1) Command Byte Function
Bits Functions
A7 -
A6 -
A5 Read / Write
A4 -
A3 -
A2 -
A1 -
A0 Register Number / Data
Discription
-
-
0:Write 1:Read
-
-
-
-
0:Register Number 1:Register Data
DATA SHEET DOD-PP-0818 (1st edition)
11
11 Page | ||
| Páginas | Total 28 Páginas | |
| PDF Descargar | [ Datasheet NL9654HL06-01J.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NL9654HL06-01J | LCD Module | NEC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |