MCR265-6 PDF даташит
Спецификация MCR265-6 изготовлена «Digitron Semiconductors» и имеет функцию, называемую «THYRISTORS». |
|
Детали детали
Номер произв | MCR265-6 |
Описание | THYRISTORS |
Производители | Digitron Semiconductors |
логотип |
3 Pages
No Preview Available ! |
MCR265 SERIES
High-reliability discrete products
and engineering services since 1977
THYRISTORS
FEATURES
Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.
Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix.
MAXIMUM RATINGS.
RATING
Peak Reverse Blocking Voltage (1)
MCR265-2
MCR265-4
MCR265-6
MCR265-8
MCR265-10
SYMBOL
VRRM
VALUE
50
200
400
600
800
UNIT
Volts
Forward Current (TC=70°C)
(All Conduction Angles)
IT(RMS)
IT(AV)
55
35
Amps
Peak Non-repetitive Surge Current – 8.3 ms
(1/2 Cycle, Sine Wave)
ITSM 550 Amps
Forward Peak Gate Power
Forward Average Gate Power
PGM
PG(AV)
20 Watts
0.5 Watt
Forward Peak Gate Current
(300μs, 120 PPS)
lGM 2.0 Amps
Operating Junction Temperature Range
TJ -40 to +125 °C
Storage Temperature Range
Tstg -40 to +150
°C
1. VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative voltage, however, positive gate voltage shall not be applied concurrent with negative potential on
the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded.
These devices are rated for use in applications subject to high surge conditions. Care must be taken to ensure proper heat sinking when the device is to be used at high sustained currents.
THERMAL CHARACTERISTICS
CHARACTERISTIC
Thermal Resistance, Junction to Case
Thermal Resistance, Junction to Ambient
SYMBOL
RθJC
RθJA
MAX
0.9
60
UNIT
°C/W
°C/W
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
Peak Forward Blocking Voltage (TJ = 125°C)
Peak forward blocking current
(rated VDRM @ TJ = 125°C)
Peak reverse blocking current
(rated VRRM @ TJ = 125°C)
Forward “on” voltage(1)
(ITM = 110A)
MCR265-2
MCR265-4
MCR265-6
MCR265-8
MCR265-10
SYMBOL
VDRM
IDRM
IRRM
VTM
MIN TYP MAX
50 -
200 -
400 -
600 -
800 -
-
-
-
-
-
- - 2.0
- - 2.0
- 1.5 1.9
UNIT
Volts
mA
mA
Volts
Rev. 20130116
No Preview Available ! |
High-reliability discrete products
and engineering services since 1977
Gate trigger current (continuous dc)
(Anode voltage = 12Vdc, RL = 100ohms)
(TC = -40°C)
Gate trigger voltage (continuous dc)
(Anode voltage = 12Vdc, RL = 100ohms)
Gate non-trigger voltage
(Anode voltage = rated VDRM, RL = 100ohms, TJ = 125°C)
MECHANICAL CHARACTERISTICS
Case:
TO-220AB
Marking:
Body painted, alpha-numeric
Pin out:
See below
MCR265 SERIES
THYRISTORS
IGT - 20 50 mA
- 40 90
VGT - 1.0 1.5 Volts
VGD
0.2 -
- Volts
Rev. 20130116
No Preview Available ! |
High-reliability discrete products
and engineering services since 1977
MCR265 SERIES
THYRISTORS
Rev. 20130116
Скачать PDF:
[ MCR265-6.PDF Даташит ]
Номер в каталоге | Описание | Производители |
MCR265-10 | Thyristor ( SCR ) | Motorola Semiconductors |
MCR265-10 | Silicon Controlled Rectifiers | ON Semiconductor |
MCR265-10 | THYRISTORS | Digitron Semiconductors |
MCR265-2 | Thyristor ( SCR ) | Motorola Semiconductors |
Номер в каталоге | Описание | Производители |
TL431 | 100 мА, регулируемый прецизионный шунтирующий регулятор |
Unisonic Technologies |
IRF840 | 8 А, 500 В, N-канальный МОП-транзистор |
Vishay |
LM317 | Линейный стабилизатор напряжения, 1,5 А |
STMicroelectronics |
DataSheet26.com | 2020 | Контакты | Поиск |