|
|
Número de pieza | HMC448 | |
Descripción | GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER/ 19 - 25 GHz OUTPUT | |
Fabricantes | Hittite Microwave Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HMC448 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! MICROWAVE CORPORATION
v00.0902
HMC448
GaAs MMIC x2 ACTIVE FREQUENCY
MULTIPLIER, 19 - 25 GHz OUTPUT
Typical Applications
The HMC448 is suitable for:
• Clock Generation Applications:
SONET OC-192 & SDH STM-64
• Pt to Pt & VSAT Radios
• Test Instrumentation
• Military & Space
4 Functional Diagram
Features
Output Power: +11 dBm
Wide Input Power Range: -4 to +6 dBm
Fo, 3Fo Isolation: >20 dBc @ Fout= 20 GHz
100 KHz SSB Phase Noise: -135 dBc/Hz
Single Supply: 5V@ 48 mA
Die Size: 1.16 mm x 1.20 mm x 0.1 mm
General Description
The HMC448 die is a x2 active broadband frequency
multiplier chip utilizing GaAs PHEMT technology.
When driven by a 0 dBm signal, the multiplier
provides +11 dBm typical output power from 19 to
25 GHz. The Fo and 3Fo isolations are >22 dBc
up to 22 GHz. This multi-rate frequency multiplier
can be used in the generation of a half rate clock
for 40 Gbps systems or as part of a multiplier chain
to generate a full rate 40 Gbps clock. The HMC448
is also ideal for use in LO multiplier chains for Pt
to Pt & VSAT Radios yielding reduced parts count
vs. traditional approaches. The low additive SSB
Phase Noise of -135 dBc/Hz at 100 kHz offset helps
maintain good system noise performance. All data
is with the chip in a 50 ohm test fixture connected
via 0.076mm x 0.0127mm (3mil x 0.5mil) ribbon
bonds of minimal length 0.31mm (<12mils).
Electrical Specifications, TA = +25° C, Vd1 = Vd2 = 5.0V, 0 dBm Drive Level
Parameter
Min.
Typ.
Max.
Min.
Typ.
Max.
Frequency Range, Input
9.5 - 11.0
11.0 - 12.5
Frequency Range, Output
19 - 22
22 - 25
Output Power
59
8 12
Fo Isolation (with respect to output level)
25 15
3Fo Isolation (with respect to output level)
25 22
Input Return Loss
96
Output Return Loss
55
SSB Phase Noise (100 kHz Offset)
-135
-135
Supply Current (Idd)
48 48
Units
GHz
GHz
dBm
dBc
dBc
dB
dB
dBc/Hz
mA
4 - 28
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
1 page MICROWAVE CORPORATION
v00.0902
HMC448
GaAs MMIC x2 ACTIVE FREQUENCY
MULTIPLIER, 19 - 25 GHz OUTPUT
Pad Description
Pad Number
Function
1 RF IN
Description
Pin is AC coupled and matched to 50 Ohm
from 9.5 - 12.5 GHz.
Interface Schematic
4
2, 3 Vd1, Vd2
Supply voltage 5V ± 0.5V.
4
RF OUT
Pin is AC coupled and matched to 50 Ohm
from 19 - 25 GHz.
GND
Die bottom must be connected to RF ground.
Assembly Diagram
4 - 32
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet HMC448.PDF ] |
Número de pieza | Descripción | Fabricantes |
HMC440QS16G | HBT DIGITAL PHASE-FREQUENCY DETECTOR/ 10 - 1300 MHz/ w/ INTEGRATED 5-BIT COUNTER/ 10 - 2800 MHz | Hittite Microwave Corporation |
HMC441 | GaAs pHEMT MMIC MEDIUM POWER AMPLIFIER | Hittite Microwave |
HMC441LC3B | GaAs PHEMT MMIC MEDIUM POWER AMPLIFIER 6 - 18 GHz | Hittite Microwave |
HMC441LH5 | GaAs PHEMT MMIC MEDIUM POWER AMPLIFIER 7.0 - 15.5 GHz | Hittite Microwave |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |