|
|
PDF HPMX-2006 Data sheet ( Hoja de datos )
| Número de pieza | HPMX-2006 | |
| Descripción | 0.8 - 2.5 GHz Upconverter/Amplifier | |
| Fabricantes | Agilent(Hewlett-Packard) | |
| Logotipo | .gif "Agilent(Hewlett-Packard)"){kind=logo} |
|
Hay una vista previa y un enlace de descarga de HPMX-2006 (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
|
No Preview Available !
0.8 – 2.5 GHz
Upconverter/Amplifier
Technical Data
HPMX-2006
Features
• Wide Band Operation
RF Output: 800 -2500 MHz
IF Input: DC- 900 MHz
• 2.7- 5.5 V Operation
• Mixer + Amplifier: 38 mA
Mixer only: 15 mA
Standby Mode: <40 µA
• Differential LO and High
Impedance IF Inputs
• -8.5 dBm Mixer and
+4.5␣ dBm Amplifier Output
Power at 1900 MHz
• JEDEC Standard SSOP-16
Surface Mount Package
Applications
• Cordless Handsets and Base
Stations
• Wireless Data Terminals
• Cellular/ PCS Handsets and
Base Stations
Package Pin Configuration
LO in
LO in
Ref
IF in
IF in
Amp Ve1
Amp RF in
enable
1
2
3
4
5
6
7
8
16 Mixer Vc
15 Gnd
14 Amp Vc
13 Amp RF Out
12 Amp Ve2
11 Amp 1 Ve2
10 Gnd 1
9 Mixer RF Out
Plastic SSOP-16
YYW20HW0P6MX
Description
The HPMX-2006 upconverter/
amplifier IC is designed to meet
the needs of cellular and PCS
telephone and wireless LAN
applications.
The IC consists of a Gilbert Cell
mixer optimized for upconversion
followed by a post-amplifier. The
mixer and amplifier are indepen-
dent allowing the insertion of a
sideband filter between the two.
Functional Block Diagram
IF INPUT ENABLE
LO
INPUT
AMP
OUTPUT
RF OUTPUT AMP INPUT
HPMX-2006
5966-0455E
7-66
The mixer is double balanced.
Both LO and IF inputs may be run
either single-endedly, or in
differential mode to reduce LO
leakage. LO inputs are matched
near 50 Ω; high impedance IF
inputs allow the mixer to be used
as a BPSK modulator. An inte-
grated transformer on the mixer
RF port creates a single-ended,
matched to 50 Ω output at
1900␣ MHz, and also reduces
common mode noise.
1 page  
HPMX-2006 Mixer Port Impedances
GHz
0.05
0.10
0.15
0.20
0.25
0.30
0.40
0.50
0.60
0.70
0.80
0.90
Mag.
0.86
0.81
0.84
0.88
0.93
0.91
0.80
0.81
0.80
0.80
0.85
0.84
Deg.
-4
-3
-1
-3
-9
-15
-19
-23
-28
-30
-34
-39
Figure 8. Impedance of Mixer IF Port.
Circuit of Figure 11 with 1 k Pull up
Resistors for the IFs and LO and RF Ports
Terminated in 50␣ Ω.
GHz
0.50[1]
0.75
1.00
1.25
1.50
1.75
1.75[2]
2.00
2.25
2.50
2.75
3.00
Mag.
0.49
0.48
0.46
0.42
0.40
0.31
0.24
0.20
0.20
0.16
0.37
0.53
Deg.
-49
-63
-73
-82
-102
-114
-131
147
87
15
-131
168
GHz
0.50
0.75
1.00
1.25
1.50
1.75
2.00
2.25
2.50
2.75
3.00
Mag.
0.60
0.55
0.52
0.36
0.18
0.17
0.20
0.24
0.28
0.34
0.37
Deg.
82
38
-5
-35
-44
-17
5
13
17
12
3
Figure 9. Impedance of Mixer LO Port.
[1] Circuit of Figure 11 with IF and RF
Ports Terminated in 50␣ Ω.
[2] As above but LO RC combination in
Figure 11 changed from 12␣ Ω and
12␣ pF to 0␣ Ω and 2.7␣ pF (recommended
use for >1.75 GHz).
Figure 10. Impedance of Mixer RF
Port.
Circuit of Figure 11 with IF and LO Ports
Terminated in 50 Ω.
Typical Scattering Parameters, Common Emitter, ZO = 50 Ω,VCC = 3 V,IC␣ =␣ 23mA
Freq.
GHz
S11
Mag. Ang.
S21
dB Mag. Ang.
S12
dB Mag. Ang.
0.1
0.51 149
19.72 9.68 -26
-37.08 0.014 -43
0.5
0.37 144
17.42 7.43 -49
-39.17 0.011 11
0.8
0.37 120
16.56 6.73 -76
-43.10 0.007 1
0.9
0.37 113
16.24 6.49 -85
-36.48 0.015 25
1.0
0.39 104
15.99 6.30 -94
-40.00 0.010 22
1.1
0.39 96
15.55
5.99 -101
-41.94 0.008 28
1.2
0.40 88
15.16
5.73 -112
-47.96 0.004 118
1.3
0.41 81
15.07
5.67 -120
-38.42 0.012 68
1.4
0.40 75
14.50
5.31 -125
-40.92 0.009 85
1.5
0.40 67
13.37
4.66 -134
-46.02 0.005 147
1.6
0.38 62
12.69
4.31 -145
-33.98 0.020 99
1.7
0.37 61
12.46
4.20 -148
-33.15 0.022 102
1.8
0.36 58
11.64
3.82 -153
-32.77 0.023 102
1.9
0.33 62
11.17
3.62 -161
-34.42 0.019 88
2.0
0.33 62
10.81
3.47 -168
-34.89 0.018 91
2.1 0.31 64 9.99 3.16 -175 -29.37 0.034 96
2.2 0.31 70 9.37 2.94 178 -30.75 0.029 102
2.3 0.30 75 8.66 2.71 173 -30.75 0.029 89
2.4 0.32 79 8.10 2.54 170 -33.15 0.022 90
2.5 0.32 84 7.16 2.28 166 -32.77 0.023 89
3.0 0.32 94 4.45 1.67 134 -28.40 0.038 99
S22
Mag. Ang.
0.91 -3
0.78 -16
0.80 -22
0.83 -23
0.84 -26
0.84 -29
0.84 -32
0.85 -33
0.87 -36
0.84 -40
0.85 -40
0.84 -44
0.84 -49
0.79 -51
0.77 -54
0.75 -58
0.72 -62
0.69 -65
0.67 -70
0.65 -76
0.49 -103
7-70
5 Page | ||
| Páginas | Total 8 Páginas | |
| PDF Descargar | [ Datasheet HPMX-2006.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HPMX-2001 | Silicon Bipolar Monolithic QPSK Modulator |  Hewlett-Packard |
| HPMX-2003 | Silicon Bipolar RFIC 900 MHz Vector Modulator | Agilent(Hewlett-Packard) |
| HPMX-2005 | Silicon Bipolar RFIC 100 MHz Vector Modulator | Agilent(Hewlett-Packard) |
| HPMX-2006 | 0.8 - 2.5 GHz Upconverter/Amplifier | Agilent(Hewlett-Packard) |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |