DataSheet26.com

HLMP-C110 PDF даташит

Спецификация HLMP-C110 изготовлена ​​​​«Agilent(Hewlett-Packard)» и имеет функцию, называемую «T-13/4 (5 mm) High Performance TS AlGaAs Red LED Lamps».

Детали детали

Номер произв HLMP-C110
Описание T-13/4 (5 mm) High Performance TS AlGaAs Red LED Lamps
Производители Agilent(Hewlett-Packard)
логотип Agilent(Hewlett-Packard) логотип 

5 Pages
scroll

No Preview Available !

HLMP-C110 Даташит, Описание, Даташиты
H
T-13/4 (5 mm) High Performance
TS AlGaAs Red LED Lamps
Technical Data
HLMP-810X Series
HLMP-C100
HLMP-C110
Features
• Exceptional Brightness
• Outstanding LED Material
Efficiency
• High Light Output Over a
Wide Range of Drive
Currents
• Viewing Angle: Narrow or
Wide
• Low Forward Voltage
• Low Power Dissipation
• CMOS/MOS Compatible
• Red Color
Package Dimensions
4.82 ± 0.25
(0.190 ± 0.010)
8.80 ± 0.38
(0.347 ± 0.015)
12.3 ± 0.5
(0.485 ± 0.020)
0.76 ± 0.13
(0.030 ± 0.005)
23.0 MIN.
(0.90)
1.17 ± 0.15
(0.046 ± 0.006)
Description
These T-13/4, untinted,
nondiffused lamps utilize a
highly optimized LED material
technology, transparent
substrate aluminum gallium
arsenide (TS AlGaAs). This
LED technology has a very high
luminous efficiency, capable of
producing high light output over
a wide range of drive currents
(500 µA to 50 mA). The color is
deep red at a dominant wave-
length of 644 nm. TS AlGaAs is
a flip-chip LED technology, die
attached to the anode lead and
wire bonded to the cathode lead.
4.82 ± 0.25
(0.190 ± 0.010)
8.80 ± 0.38
(0.347 ± 0.015)
11.3 ± 0.5
(0.445 ± 0.020)
0.76 ± 0.13
(0.030 ± 0.005)
23.0 MIN.
(0.90)
1.17 ± 0.15
(0.046 ± 0.006)
8.70 ± 0.20
(0.343 ± 0.008)
1.14 ± 0.20
(0.045 ± 0.008)
31.4
(1.23)
MIN.
5.00 ± 0.20
(0.197 ± 0.008)
2.35
(0.093)
MAX.
0.70
(0.028)
MAX.
CATHODE
1.27
(0.050)
NOM.
0.64 SQUARE
(0.025) NOMINAL
1.27
(0.050)
NOM.
0.64 SQUARE
(0.025) NOMINAL
1.27
(0.050)
NOM.
0.50
(0.020
±
±
0.10
0.004)
SQUARE
CATHODE
5.80 ± 0.30
(0.228 ± 0.012)
2.54 NOM.
(0.100)
CATHODE
5.80 ± 0.30
(0.228 ± 0.012)
2.54 NOM.
(0.100)
HLMP-8100
HLMP-8102/-8103
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETERS/INCHES.
2. THE LEADS ARE MILD STEEL, SOLDER DIPPED.
3. AN EPOXY MENISCUS MAY EXTEND ABOUT 1 mm (0.040") DOWN THE LEADS, UNLESS OTHERWISE NOTED.
1-44
5.80 ± 0.20
(0.228 ± 0.008)
CATHODE
2.54
(0.100)
NOM.
HLMP-C100/-C110
5964-9291E









No Preview Available !

HLMP-C110 Даташит, Описание, Даташиты
Axial Luminous Intensity and Viewing Angle at TA = 25°C
Part Number
HLMP-
Minimum Intensity
(mcd) @ 20 mA
Typical Intensity
(mcd) @ 20 mA
Typical Radiant
Intensity
(mW/sr) @ 20 mA
8103
2000
3000
35.3
8102
1400
2000
23.5
8100
290
1000
11.8
C100
290
750 8.8
C110
200
400 4.7
Note:
1. θ1/2 is the off axis angle from optical centerline where the luminous intensity is 1/2 the on-axis value.
2θ1/2 [1]
Degrees
7
7
19
30
40
Absolute Maximum Ratings at TA = 25°C
Peak Forward Current[2] .......................................................... 300 mA
Average Forward Current (@ IPEAK = 300 mA) [1,2] ................... 30 mA
DC Forward Current[3] ............................................................... 50 mA
Power Dissipation .................................................................... 100 mW
Reverse Voltage (IR=100 µA) ........................................................... 5 V
Transient Forward Current (10 µs Pulse)[4] ............................ 500 mA
Operating Temperature Range ...................................... -55 to +100°C
Storage Temperature Range .......................................... -55 to +100°C
LED Junction Temperature ....................................................... 110°C
Lead Soldering Temperature
[1.6 mm (0.063 in.) from body] .......................... 260°C for 5 seconds
Notes:
1. Maximum IAVG at f = 1 kHz, DF = 10%.
2. Refer to Figure 6 to establish pulsed operating conditions.
3. Derate linearly as shown in Figure 5.
4. The transient peak current is the maximum non-recurring peak current the device
can withstand without damaging the LED die and wire bonds. It is not
recommended that the device be operated at peak currents above the Absolute
Maximum Peak Forward Current.
1-45









No Preview Available !

HLMP-C110 Даташит, Описание, Даташиты
Electrical/Optical Characteristics at TA = 25°C
Description
Symbol Min. Typ. Max.
Forward Voltage
Reverse Voltage
Peak Wavelength
Dominant Wavelength[1]
Spectral Line Halfwidth
VF
VR
λPEAK
λd
∆λ1/2
1.85
5.0 20.0
654
644
18
2.4
Speed of Response
τS
45
Capacitance
Thermal Resistance
HLMP-810X
HLMP-C1X0
Luminous Efficacy[2]
C
RθJ-PIN
ηv
20
210
237
85
Units
V
V
nm
nm
nm
ns
pF
°C/W
lm/W
Test Conditions
IF = 20 mA
IR = 100 µA
Exponential Time
Constant, e-t/τ
VF = 0, f = 1 MHz
Junction-to-Anode Lead
Notes:
1. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the color of the device.
2. The radiant intensity, Ie, in watts per steradian, may be found from the equation Ie=IV/ηV, where IV is the luminous intensity in
candelas and ηV is luminous efficacy in lumens/watt
1.0
10 -1
10 -2
10 -3
500
600
700 1000
WAVELENGTH - nm
Figure 1. Relative Intensity vs. Wavelength.
300
200
100
50
20
10
5
2
1
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5
VF - FORWARD VOLTAGE - V
Figure 2. Forward Current vs. Forward Voltage.
1-46










Скачать PDF:

[ HLMP-C110.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
HLMP-C110T-13/4 (5 mm) High Performance TS AlGaAs Red LED LampsAgilent(Hewlett-Packard)
Agilent(Hewlett-Packard)
HLMP-C115(HLMP-Cxxx) T-13/4 Super Ultra-Bright LED LampsAgilent
Agilent
HLMP-C115LED LampsAVAGO
AVAGO
HLMP-C116(HLMP-Cxxx) T-13/4 Super Ultra-Bright LED LampsAgilent
Agilent

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск