|
|
PDF HMC363S8G Data sheet ( Hoja de datos )
| Número de pieza | HMC363S8G | |
| Descripción | SMT GaAs HBT MMIC DIVIDE-BY-8/ DC - 12.0 GHz | |
| Fabricantes | Hittite Microwave Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HMC363S8G (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
v02.1202
MICROWAVE CORPORATION
10
Typical Applications
Prescaler for DC to X Band PLL Applications:
• Satellite Communication Systems
• Fiber Optic
• Pt-Pt and Pt-MPt Radios
• VSAT
Functional Diagram
HMC363S8G
SMT GaAs HBT MMIC
DIVIDE-BY-8, DC - 12.0 GHz
Features
Ultra Low SSB Phase Noise: -153 dBc/Hz
Wide Bandwidth
Output Power: -6 dBm
Single DC Supply: +5V
S8G SMT Package
General Description
The HMC363S8G is a low noise Divide-by-8
Static Divider with InGaP GaAs HBT technology
in an 8 lead surface mount plastic package. This
device operates from DC (with a square wave
input) to 12 GHz input frequency with a single
+5.0V DC supply. The low additive SSB phase
noise of -153 dBc/Hz at 100 kHz offset helps the
user maintain good system noise performance.
Electrical Specifications, TA = +25° C, 50 Ohm System, Vcc= 5V
Parameter
Conditions
Min. Typ.
Maximum Input Frequency
12 13
Minimum Input Frequency
Sine Wave Input. [1]
0.2
Input Power Range
Fin = 1 to 7 GHz
-15 >-20
Fin = 7 to 11 GHz
-10 >-15
Fin = 11 to 12 GHz
-5 >-8
Output Power
Fin = 12 GHz
-9 -6
Reverse Leakage
Both RF Outputs Terminated
65
SSB Phase Noise (100 kHz offset)
Pin = 0 dBm, Fin = 6 GHz
-153
Output Transition Time
Pin = 0 dBm, Fout = 882 MHz
100
Supply Current (Icc)
1. Divider will operate down to DC for square-wave input signal.
70
Max.
0.5
+10
+2
0
Units
GHz
GHz
dBm
dBm
dBm
dBm
dB
dBc/Hz
ps
mA
10 - 26
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
1 page  
v02.1202
MICROWAVE CORPORATION
Evaluation PCB
10
HMC363S8G
SMT GaAs HBT MMIC
DIVIDE-BY-8, DC - 12.0 GHz
List of Materials
Item
Description
J1 - J3
PC Mount SMA RF Connector
C1 - C4
100 pF Capacitor, 0402 Pkg.
C5 1000 pF Capacitor, 0603 Pkg.
C6 10 µF Tantalum Capacitor
U1 HMC363S8G Divide-by-8
PCB*
104627 Eval Board
* Circuit Board Material: Rogers 4350
The circuit board used in the final application should use
RF circuit design techniques. Signal lines should have
50 ohm impedance while the package ground leads
and backside ground slug should be connected directly
to the ground plane similar to that shown. A sufficient
number of via holes should be used to connect the top
and bottom ground planes. The evaluation circuit board
shown is available from Hittite upon request. This evalu-
ation board is designed for single ended input testing. J2
and J3 provide differential output signals.
10 - 30
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet HMC363S8G.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HMC363S8G | SMT GaAs HBT MMIC DIVIDE-BY-8/ DC - 12.0 GHz | Hittite Microwave Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |