|
|
PDF HMC364 Data sheet ( Hoja de datos )
| Número de pieza | HMC364 | |
| Descripción | GaAs HBT MMIC DIVIDE-BY-2/ DC - 13.0 GHz | |
| Fabricantes | Hittite Microwave Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HMC364 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
v02.1202
MICROWAVE CORPORATION
Typical Applications
Prescaler for DC to Ku Band PLL Applications:
• Satellite Communication Systems
• Fiber Optic
3 • Pt-Pt and Pt-MPt Radios
• VSAT
Functional Diagram
HMC364
GaAs HBT MMIC
DIVIDE-BY-2, DC - 13.0 GHz
Features
Ultra Low SSB Phase Noise: -145 dBc/Hz
Wide Bandwidth
Output Power: 4 dBm
Single DC Supply: +5V
Small Size: 0.686 mm x 1.143 mm
General Description
The HMC364 is a low noise Divide-by-2 Static
Divider with InGaP GaAs HBT technology that
has a small size of 0.686 mm x 1.143 mm. This
device operates from DC (with a square wave
input) to 13 GHz input frequency with a single
+5.0V DC supply. The low additive SSB phase
noise of -145 dBc/Hz at 100 kHz offset helps the
user maintain good system noise performance.
3 - 20
Electrical Specifications, TA = +25° C, 50 Ohm System, Vcc= 5V
Parameter
Conditions
Min. Typ.
Maximum Input Frequency
13 14
Minimum Input Frequency
Sine Wave Input. [1]
0.2
Input Power Range
Fin = 1 to 10 GHz
-15 >-20
Fin = 10 to 12 GHz
-10 >-15
Fin = 12 to 13 GHz
-4 >-8
Output Power [2]
Fin = 6 GHz
14
Fin = 9 GHz
-2
Fin = 11 GHz
-5
Fin = 13 GHz
-9
Reverse Leakage
Both RF Outputs Terminated
40
SSB Phase Noise (100 kHz offset)
Pin = 0 dBm, Fin = 6 GHz
-145
Output Transition Time
Pin = 0 dBm, Fout = 882 MHz
100
Supply Current (Icc) [2]
1. Divider will operate down to DC for square-wave input signal.
2. When operating in high power mode (pin 10 connected to ground).
105
Max.
0.5
+10
+5
+2
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
Units
GHz
GHz
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dB
dBc/Hz
ps
mA
1 page  
v02.1202
MICROWAVE CORPORATION
Pad Description (continued)
Pad Number
Function
HMC364
GaAs HBT MMIC
DIVIDE-BY-2, DC - 13.0 GHz
Description
Interface Schematic
3
10 PWR SEL
In the low power mode, the power select pin is left floating.
By grounding this pin, the output power is increased by
approximately 6 dB.
13 PWR DWN
The power down pin is grounded for normal operation.
Applying 5 volts to this pin will power down this device.
14
DISABLE
The disable pin is grounded for normal operation.
Applying 5 volts to this pin will disable the input buffer amplifier.
Truth Table
Function Pin
5V
GND
Float
DISABLE 14 Output Off Output On
X
PWR
DWN
13
Power
Down
Power Up
X
PWR
SEL
10
x
High
Low
Power Output Power Output
X = State not permitted.
3 - 24
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet HMC364.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HMC361 | GaAs HBT MMIC DIVIDE-BY-2/ DC - 11.0 GHz | Hittite Microwave Corporation |
| HMC361G8 | SMT GaAs HBT MMIC |  Analog Devices |
| HMC361S8G | SMT GaAs HBT MMIC DIVIDE-BY-2/ DC - 10.0 GHz | Hittite Microwave Corporation |
| HMC362 | GaAs HBT MMIC DIVIDE-BY-4/ DC - 11.0 GHz | Hittite Microwave Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |