|
|
PDF HMC372LP3 Data sheet ( Hoja de datos )
| Número de pieza | HMC372LP3 | |
| Descripción | GaAs PHEMT MMIC LOW NOISE AMPLIFIER/ 700 - 1000 MHz | |
| Fabricantes | Hittite Microwave Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HMC372LP3 (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
|
No Preview Available !
v01.0604
MICROWAVE CORPORATION
HMC372LP3
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 700 - 1000 MHz
8
8 - 124
Typical Applications
The HMC372LP3 is ideal for
basestation receivers:
• GSM, GPRS & EDGE
• CDMA & W-CDMA
• Private Land Mobile Radio
Functional Diagram
Features
Noise Figure: <1.0 dB
+34 dBm Output IP3
Gain: 15 dB
Very Stable Gain vs. Supply & Temperature
Single Supply: +5.0 V @ 100 mA
50 Ohm Matched Output
General Description
The HMC372LP3 is a GaAs PHEMT MMIC Low
Noise Amplifier that is ideal for GSM & CDMA
cellular basestation front-end receivers operating
between 700 and 1000 MHz. The amplifier has
been optimized to provide 1.0 dB noise figure, 15
dB gain and +34 dBm output IP3 from a single
supply of +5.0V @ 100 mA. Input and output return
losses are 25 and 14 dB respectively with the LNA
requiring only four external components to optimize
the RF Input match, RF ground and DC bias. The
HMC372LP3 shares the same package and pinout
with the HMC356LP3 high IP3 LNA. A low cost,
leadless 3x3 mm (LP3) SMT QFN package houses
the low noise amplifier.
Electrical Specifications, TA = +25° C, Vs = +5V
Parameter
Min. Typ. Max.
Frequency Range
810 - 960
Gain
12.5
14.5
Gain Variation Over Temperature
0.008
0.015
Noise Figure
1.0 1.3
Input Return Loss
25
Output Return Loss
14
Reverse Isolation
20
Output Power for 1dB Compression (P1dB)
18 21
Saturated Output Power (Psat)
23.5
Output Third Order Intercept (IP3)
(-20 dBm Input Power per tone, 1 MHz tone spacing)
34
Supply Current (Idd)
100
Min. Typ. Max.
700 - 1000
11.5
14.5
0.008
0.015
1.0 1.3
25
12
22
17 20
22.5
Units
MHz
dB
dB / °C
dB
dB
dB
dB
dBm
dBm
30 33
dBm
100 mA
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
1 page  
v01.0604
MICROWAVE CORPORATION
HMC372LP3
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 700 - 1000 MHz
8 Outline Drawing
NOTES:
1. MATERIAL PACKAGE BODY: LOW STRESS INJECTION MOLDED
PLASTIC SILICA AND SILICON IMPREGNATED.
2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY
3. LEAD AND GROUND PADDLE PLATING: Sn/Pb SOLDER
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
6. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
7. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
8. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
9. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB
LAND PATTERN
8 - 128
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
5 Page | ||
| Páginas | Total 8 Páginas | |
| PDF Descargar | [ Datasheet HMC372LP3.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HMC372LP3 | GaAs PHEMT MMIC LOW NOISE AMPLIFIER/ 700 - 1000 MHz | Hittite Microwave Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |