|
|
PDF HMC393MS8G Data sheet ( Hoja de datos )
| Número de pieza | HMC393MS8G | |
| Descripción | GaAs MMIC DPDT DIVERSITY SWITCH/ 5.0 - 6.0 GHz | |
| Fabricantes | Hittite Microwave Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HMC393MS8G (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
v01.0301
MICROWAVE CORPORATION
Typical Applications
This switch is ideal for use as a DPDT Diversity
Switch for 5.0 - 6.0 GHz applications:
• HiperLAN
• UNII
Functional Diagram
14
HMC393MS8G
GaAs MMIC DPDT DIVERSITY
SWITCH, 5.0 - 6.0 GHz
Features
Low Insertion Loss: 1.2 dB @ 5.5 GHz
High IP3: 49 dBm
Positive Control: 0/+5V
Ultra Small MSOP8G Package: 14.8 mm2
General Description
The HMC393MS8G is a low cost C-band DPDT
switch that operates between 5.0 and 6.0 GHz.
This switch can operate as an integrated antenna
diversity and transmit/receive switch for the
HyperLAN and UNII radio platforms. The design
provides 20 dB of isolation between antennas
and between Tx and Rx ports. The switch fea-
tures 1.2 dB insertion loss and high power han-
dling capability. Switch state is controlled using
four CMOS level control voltage lines.
Electrical Specifications, TA = +25° C, Vctl = 0/+5 Vdc, 50 Ohm System
Parameter
Frequency
Min. Typ.
Insertion Loss
5.0 - 6.0 GHz
1.2
Isolation
5.0 - 6.0 GHz
15 20
Return Loss (On State, Any Port)
5.0 - 6.0 GHz
13 20
Input Power for 0.1 dB Compression
5.0 - 6.0 GHz
27 30
Input Third Order Intercept
(Two-Tone Input Power = +22 dBm Each Tone)
5.0 - 6.0 GHz
45 49
Switching Characteristics
5.0 - 6.0 GHz
tRISE / tFALL (10/90% RF)
tON / tOFF (50% CTL to 10/90% RF)
11
22
Max.
2.0
Units
dB
dB
dB
dBm
dBm
ns
ns
14 - 218
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
1 page  
v01.0301
MICROWAVE CORPORATION
Evaluation PCB
HMC393MS8G
GaAs MMIC DPDT DIVERSITY
SWITCH, 5.0 - 6.0 GHz
14
*R1 & R2 = 100 Ohm.
These optional resistors will
provide more RF path to control
circuit isolation.
List of Material
Item
Description
J1 - J4
PC Mount SMA Connector
J5 - J8
DC Pin
C1 - C4
Chip Capacitor, 0402 Pkg. Choose value for lowest
frequency of operation. 100 pF is provided on PCB.
R1 - R2
100 Ohm Resistor, 0402 Pkg.
U1 HMC393MS8G DPDT Diversity Switch
PCB*
103037 Evaluation PCB 1.5”x1.5”
* Circuit Board Material: Rogers 4350
The circuit board used in the final application should use RF
circuit design techniques. Signal lines should have 50 ohm
impedance while the package ground leads and exposed
paddle should be connected directly to the ground plane
similar to that shown above. A sufficient number of VIA
holes should be used to connect the top and bottom ground
planes. The evaluation circuit board shown above is avail-
able from Hittite upon request.
14 - 222
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet HMC393MS8G.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HMC393MS8G | GaAs MMIC DPDT DIVERSITY SWITCH/ 5.0 - 6.0 GHz | Hittite Microwave Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |