|
|
PDF HMC410MS8G Data sheet ( Hoja de datos )
| Número de pieza | HMC410MS8G | |
| Descripción | GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER/ 9.0 - 15.0 GHz | |
| Fabricantes | Hittite Microwave Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HMC410MS8G (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
v00.1101
MICROWAVE CORPORATION
HMC410MS8G
GaAs MMIC DOUBLE-BALANCED
HIGH IP3 MIXER, 9.0 - 15.0 GHz
Typical Applications
The HMC410MS8G is ideal for:
• Long Haul Radio Platforms
• Microwave Radio
• VSAT
12
Functional Diagram
Features
Conversion Loss: 8.0 dB
LO/RF Isolation: 40 dB
LO/IF Isolation: 37 dB
Input IP3: +24 dBm
No External Components
MSOP8G SMT Package
General Description
The HMC410MS8G is a passive double balanced
high IP3 mixer that operates between 9 GHz and
15 GHz. The HMC410MS8G operates with LO
drive levels between +13 dBm and +19 dBm, and
provides 8 dB conversion loss across the entire
specified frequency band. This mixer requires no
external components or bias.
Electrical Specifications, TA = +25° C
Parameter
IF = 1.45 GHz
LO = +17 dBm
Min. Typ.
Frequency Range, RF & LO
9.0 - 15.0
Frequency Range, IF
DC - 2.5
Conversion Loss
8
Noise Figure (SSB)
8
LO to RF Isolation
30 40 - 45
LO to IF Isolation
30 37
RF to IF Isolation
8 17
IP3 (Input)
20 24
1 dB Compression (Input)
11 14
* Unless otherwise noted, all measurements performed as downconverter, IF= 1.45 GHz.
Max.
11
11
Units
GHz
GHz
dB
dB
dB
dB
dB
dBm
dBm
12 - 224
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
1 page  
v00.1101
MICROWAVE CORPORATION
HMC410MS8G
GaAs MMIC DOUBLE-BALANCED
HIGH IP3 MIXER, 9.0 - 15.0 GHz
Pin Descriptions
Pin Number
1, 8
Function
GND
Description
Pins and exposed ground slug must connect to RF ground.
Interface Schematic
12
2
LO Port
This pin is DC coupled and matched to 50 ohm from
9.0 - 15.0 GHz
3, 4, 6
5
N/C
IF Port
Not Connected
This pin is DC coupled. For applications not requiring operation
to DC, this port should be DC blocked externally using a series
capacitor whose value has been chosen to pass the necessary
IF frequency range. For operation to DC, this pin must not
source/sink more than 4mA of current or die non-function and
possible die failure will result.
7
RF Port
This pin is AC coupled and matched to 50 ohm from
9.0 - 15.0 GHz.
12 - 228
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet HMC410MS8G.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HMC410MS8G | GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER/ 9.0 - 15.0 GHz | Hittite Microwave Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |