DataSheet26.com

AMC010CFLKA PDF даташит

Спецификация AMC010CFLKA изготовлена ​​​​«Advanced Micro Devices» и имеет функцию, называемую «1/ 2/ 4/ or 10 Megabyte 5.0 V-only Flash Memory PC Card».

Детали детали

Номер произв AMC010CFLKA
Описание 1/ 2/ 4/ or 10 Megabyte 5.0 V-only Flash Memory PC Card
Производители Advanced Micro Devices
логотип Advanced Micro Devices логотип 

30 Pages
scroll

No Preview Available !

AMC010CFLKA Даташит, Описание, Даташиты
FINAL
AmC0XXCFLKA
1, 2, 4, or 10 Megabyte 5.0 V-only Flash Memory PC Card
DISTINCTIVE CHARACTERISTICS
s High performance
— 150 ns maximum access time
s Single supply operation
— Write and erase voltage, 5.0 V ±5%
— Read voltage, 5.0 V ±5%
s CMOS low power consumption
— 45 mA maximum active read current (x8 mode)
— 65 mA maximum active erase/write current
(x8 mode)
s High write endurance
— Minimum 100,000 erase/write cycles
s PCMCIA/JEIDA 68-pin standard
— Selectable byte- or word-wide configuration
s Write protect switch
— Prevents accidental data loss
s Zero data retention power
— Batteries not required for data storage
s Separate attribute memory
— 512 byte EEPROM
s Automated write and erase operations increase
system write performance
— 64K byte memory sectors for faster automated
erase speed
— Typically 1.5 seconds per single memory sector
erase
— Random address writes to previously erased
bytes (16 µs typical per byte)
s Total system integration solution
— Support from independent software and
hardware vendors
s Low insertion and removal force
— State-of-the-art connector allows for minimum
card insertion and removal effort
s Sector erase suspend/resume
— Suspend the erase operation to allow a read
operation in another sector within the same
device
GENERAL DESCRIPTION
AMD’s 5.0 V-only Flash Memory PC Card provides the
highest system level performance for data and file stor-
age solutions to the portable PC market segment. Man-
ufactured with AMD’s Negative Gate Erase, 5.0 V-only
technology, the AMD 5.0 V-only Flash Memory Cards
are the most cost-effective and reliable approach to
single-supply Flash memory cards. Data files and ap-
plication programs can be stored on the “C” series
cards. This allows OEM manufacturers of portable sys-
tems to eliminate the weight, high power consumption
and reliability issues associated with electromechanical
disk-based systems. The “C” series cards also allow to-
day’s bulky and heavy battery packs to be reduced in
weight and size. Typically only two “AA” alkaline batter-
ies are required for total system operation. AMD’s
Flash Memory PC Cards provide the most efficient
method to transfer useful work between different hard-
ware platforms. The enabling technology of the “C” se-
ries cards enhances the productivity of mobile workers.
Widespread acceptance of the “C” series cards is as-
sured due to their compatibility with the 68-pin PCM-
CIA/JEIDA international standard. AMD’s Flash
Memory Cards can be read in either a byte-wide or
word-wide mode which allows for flexible integration
into various system platforms. Compatibility is assured
at the hardware interface and software interchange
specification. The Card Information Structure (CIS) or
Metaformat, can be written by the OEM at the memory
card’s attribute memory address space beginning at
address 00000H by using a format utility. The CIS ap-
pears at the beginning of the Card’s attribute memory
space and defines the low-level organization of data on
the PC Card. The “C” series cards contains a separate
512 byte EEPROM memory for the cards’ attribute
memory space. This allows all of the Flash memory to
be used for the common memory space.
Third party software solutions such as Microsoft’s
Flash File System (FFS), M-System’s True FFS, and
SCM’s SCM-FFS, enable AMD’s Flash Memory PC
Card to replicate the function of traditional disk-based
memory systems.
Publication# 18723 Rev: C Amendment/+1
Issue Date: May 1998









No Preview Available !

AMC010CFLKA Даташит, Описание, Даташиты
BLOCK DIAGRAM
VCC
R R D0–D15
WE
OE
WP
I/O
Transceivers
and
Buffers WP
(Note 1)
D8–D15
D0–D7
WE
OE
VCC
VCC
R RR
Write Protect
Switch
A0
A1–A23*
CE2
CE1
Address
Buffers
and
Decoders
A1–A9
A0–A18
CEH0–
CEH9
CEL0 –
CEL9
A0
CE2
CE1
REG
A0–A8 D0–D7
Attribute Memory
CE
CD1
CD2
Card Detect
BVD1
BVD2
Am29F040
A0–A18 D0–D7
CE
WE S0*
OE
VSS VCC
A0–A18 D0–D7
CE
WE S2*
OE
VSS VCC
Am29F040
A0–A18 D8–D15
CE
WE S1*
OE
VSS VCC
A0–A18 D8–D15
CE
WE S3*
OE
VSS VCC
10K
VCC
Battery Voltage
Detect
GND
VCC
A0–A18 D0–D7
CE
WE S18*
OE
VSS VCC
A0–A18 D8–D15
CE
WE S19*
OE
VSS VCC
Notes:
R = 20 K(min)/140 K(max)
*1 Mbyte card = S0 + S1, *2 Mbyte card = S0…S3, *4 Mbyte card = S0…S7, *10 Mbyte card = S0…S19
18723C-1
2
AmC0XXCFLKA
5/4/98









No Preview Available !

AMC010CFLKA Даташит, Описание, Даташиты
PC CARD PIN ASSIGNMENTS
Pin#
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
3
GND
D3
D4
D5
D6
D7
CE1
A10
OE
A11
A9
A8
A13
A14
WE
NC
VCC1
NC
A16
A15
A12
A7
A6
A5
A4
A3
A2
A1
A0
D0
D1
D2
WP
GND
3 Function
Ground
I/O Data Bit 3
I/O Data Bit 4
I/O Data Bit 5
I/O Data Bit 6
I/O Data Bit 7
I Card Enable 1 (Note 3)
I Address Bit 10
I Output Enable
I Address Bit 11
I Address Bit 9
I Address Bit 8
I Address Bit 13
I Address Bit 14
I Write Enable
No Connect
Power Supply
No Connect (Note 1)
I Address Bit 16
I Address Bit 15
I Address Bit 12
I Address Bit 7
I Address Bit 6
I Address Bit 5
I Address Bit 4
I Address Bit 3
I Address Bit 2
I Address Bit 1
I Address Bit 0
I/O Data Bit 0
I/O Data Bit 1
I/O Data Bit 2
O Write Protect (Note 3)
Ground
Pin#
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
Signal
GND
CD1
D11
D12
D13
D14
D15
CE2
NC
NC
NC
A17
A18
A19
A20
A21
VCC2
NC
A22
A23
NC
NC
NC
NC
NC
NC
REG
BVD2
BVD1
D8
D9
D10
CD2
GND
I/O Function
Ground
O Card Detect 1 (Note 3)
I/O Data Bit 11
I/O Data Bit 12
I/O Data Bit 13
I/O Data Bit 14
I/O Data Bit 15
I Card Enable 2 (Note 3)
No Connect
No Connect
No Connect
I Address Bit 17
I Address Bit 18
I Address Bit 19 (Note 4)
I Address Bit 20 (Note 5)
I Address Bit 21 (Note 6)
Power Supply
No Connect (Note 1)
I Address Bit 22
I Address Bit 23 (Note 7)
No Connect
No Connect
No Connect
No Connect
No Connect
No Connect
I Register Select
O Battery Voltage Detect 2 (Note 2)
O Battery Voltage Detect 1 (Note 2)
I/O Data Bit 8
I/O Data Bit 9
I/O Data Bit 10
O Card Detect 2 (Note 3)
Ground
Notes:
I = Input to card, O = Output from card
I/O = Bidirectional
NC = No connect
In systems which switch VCC individually to cards, no signal should be directly connected between cards other than ground.
1. VPP not required for Programming or Reading operations.
2. BVD = Internally pulled-up.
3. Signal must not be connected between cards.
4. Highest address bit for 1 Mbyte card.
5. Highest address bit for 2 Mbyte card.
6. Highest address bit for 4 Mbyte card.
7. Highest address bit for 10 Mbyte card.
5/4/98
AmC0XXCFLKA
3










Скачать PDF:

[ AMC010CFLKA.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
AMC010CFLKA1/ 2/ 4/ or 10 Megabyte 5.0 V-only Flash Memory PC CardAdvanced Micro Devices
Advanced Micro Devices

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск