DataSheet26.com

74AC253 PDF даташит

Спецификация 74AC253 изготовлена ​​​​«Fairchild Semiconductor» и имеет функцию, называемую «Dual 4-Input Multiplexer with 3-STATE Outputs».

Детали детали

Номер произв 74AC253
Описание Dual 4-Input Multiplexer with 3-STATE Outputs
Производители Fairchild Semiconductor
логотип Fairchild Semiconductor логотип 

9 Pages
scroll

No Preview Available !

74AC253 Даташит, Описание, Даташиты
November 1988
Revised October 2000
74AC253 74ACT253
Dual 4-Input Multiplexer with 3-STATE Outputs
General Description
The AC/ACT253 is a dual 4-input multiplexer with 3-STATE
outputs. It can select two bits of data from four sources
using common select inputs. The outputs may be individu-
ally switched to a high impedance state with a HIGH on the
respective Output Enable (OE) inputs, allowing the outputs
to interface directly with bus oriented systems.
Features
s ICC and IOZ reduced by 50%
s Multifunction capability
s Non inverting 3-STATE outputs
s Outputs source/sink 24 mA
s ACT253 has TTL-compatible inputs
Ordering Code:
Order Number Package Number
Package Description
74AC253SC
M16A
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow
74AC253SJ
M16D
16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
74AC253PC
N16E
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
74ACT253SC
M16A
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow
74ACT253SJ
M16D
16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
74ACT253MTC
MTC16
16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
74ACT253PC
N16E
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Device also available Tape and Reel. Specify by appending suffix letterw“Xwwt.oDathtaeSohredeet4riUng.cocmode.
Logic Diagrams
Connection Diagram
IEEE/IEC
Pin Descriptions
Pin Names
I0aI3a
I0bI3b
S0, S1
OEa
OEb
Za, Zb
Description
Side A Data Inputs
Side B Data Inputs
Common Select Inputs
Side A Output Enable Input
Side B Output Enable Input
3-STATE Outputs
FACTis a trademark of Fairchild Semiconductor Corporation.
© 2000 Fairchild Semiconductor Corporation DS009946
www.fairchildsemi.com









No Preview Available !

74AC253 Даташит, Описание, Даташиты
Functional Description
The AC/ACT253 contains two identical 4-input multiplexers
with 3-STATE outputs. They select two bits from four
sources selected by common Select inputs (S0, S1). The
4-input multiplexers have individual Output Enable (OEa,
OEb) inputs which, when HIGH, force the outputs to a high
impedance (High Z) state. This device is the logic imple-
mentation of a 2-pole, 4-position switch, where the position
of the switch is determined by the logic levels supplied to
the two select inputs. The logic equations for the outputs
are shown:
Za = OEa (I0a S1 S0 + I1a S1 S0 +
I2a S1 S0 + I3a S1 S0)
Zb = OEb (I0b S1 S0 + I1b S1 S0 +
I2b S1 S0 + I3b S1 S0)
If the outputs of 3-STATE devices are tied together, all but
one device must be in the high impedance state to avoid
high currents that would exceed the maximum ratings.
Designers should ensure that Output Enable signals to 3-
STATE devices whose outputs are tied together are
designed so that there is no overlap.
Truth Table
Select
Inputs
Data Inputs
Output
Outputs
Enable
S0 S1 I0 I1 I2 I3 OE
X X XXXX H
L L LXXX L
L L HXXX L
H L XLXX L
H L XHXX L
L H XXLX L
L H XXHX L
H H XXXL L
H H XXXH L
Address Inputs S0 and S1 are common to both sections.
H = HIGH Voltage Level
L = LOW Voltage Level
X = Immaterial
Z = High Impedance
Z
Z
L
H
L
H
L
H
L
H
Logic Diagram
Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays.
www.fairchildsemi.com
2









No Preview Available !

74AC253 Даташит, Описание, Даташиты
Absolute Maximum Ratings(Note 1)
Supply Voltage (VCC)
DC Input Diode Current (IIK)
VI = −0.5V
VI = VCC + 0.5V
DC Input Voltage (VI)
DC Output Diode Current (IOK)
VO = −0.5V
VO = VCC + 0.5V
DC Output Voltage (VO)
DC Output Source
or Sink Current (IO)
DC VCC or Ground Current
per Output Pin (ICC or IGND)
Storage Temperature (TSTG)
Junction Temperature (TJ)
PDIP
0.5V to +7.0V
20 mA
+20 mA
0.5V to VCC + 0.5V
20 mA
+20 mA
0.5V to VCC + 0.5V
± 50 mA
± 50 mA
65°C to +150°C
140°C
Recommended Operating
Conditions
Supply Voltage (VCC)
AC
2.0V to 6.0V
ACT
4.5V to 5.5V
Input Voltage (VI)
Output Voltage (VO)
Operating Temperature (TA)
Minimum Input Edge Rate (V/t)
0V to VCC
0V to VCC
40°C to +85°C
AC Devices
VIN from 30% to 70% of VCC
VCC @ 3.3V, 4.5V, 5.5V
Minimum Input Edge Rate (V/t)
125 mV/ns
ACT Devices
VIN from 0.8V to 2.0V
VCC @ 4.5V, 5.5V
125 mV/ns
Note 1: Absolute maximum ratings are those values beyond which damage
to the device may occur. The databook specifications should be met, with-
out exception, to ensure that the system design is reliable over its power
supply, temperature, and output/input loading variables. Fairchild does not
recommend operation of FACTcircuits outside databook specifications.
DC Electrical Characteristics for AC
Symbol
Parameter
VIH Minimum HIGH Level
Input Voltage
VIL Maximum LOW Level
Input Voltage
VOH Minimum HIGH Level
Output Voltage
VCC
TA = +25°C
TA = −40°C to +85°C
(V) Typ
Guaranteed Limits
3.0 1.5
2.1
2.1
4.5 2.25 3.15
3.15
5.5 2.75 3.85
3.85
3.0 1.5
0.9
0.9
4.5 2.25 1.35
1.35
5.5 2.75 1.65
1.65
3.0 2.99
2.9
2.9
4.5 4.49
4.4
4.4
5.5 5.49
5.4
5.4
VOL Maximum LOW Level
Output Voltage
3.0 2.56
4.5 3.86
5.5 4.86
3.0 0.002
0.1
4.5 0.001
0.1
5.5 0.001
0.1
2.46
3.76
4.76
0.1
0.1
0.1
IIN (Note 4)
IOZ
Maximum Input Leakage Current
Maximum 3-STATE
Current
3.0
4.5
5.5
5.5
5.5
0.36
0.36
0.36
± 0.1
±0.25
0.44
0.44
0.44
± 1.0
±2.5
IOLD
IOHD
Minimum Dynamic
Output Current (Note 3)
5.5
5.5
75
75
ICC (Note 4) Maximum Quiescent Supply Current 5.5
4.0 40.0
Note 2: All outputs loaded; thresholds on input associated with output under test.
Note 3: Maximum test duration 2.0 ms, one output loaded at a time.
Note 4: IIN and ICC @ 3.0V are guaranteed to be less than or equal to the respective limit @ 5.5V VCC.
Units
Conditions
VOUT = 0.1V
V or VCC 0.1V
VOUT = 0.1V
V or VCC 0.1V
V IOUT = −50 µA
VIN = VIL or VIH
IOH = −12 mA
V IOH = −24 mA
IOH = −24 mA (Note 2)
V IOUT = 50 µA
VIN = VIL or VIH
IOL = 12 mA
V IOL = 24 mA
IOL = 24 mA (Note 2)
µA VI = VCC, GND
VI (OE) = VIL, VIH
µA VI = VCC, GND
VO = VCC, GND
mA VOLD = 1.65V Max
mA VOHD = 3.85V Min
µA VIN = VCC or GND
3 www.fairchildsemi.com










Скачать PDF:

[ 74AC253.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
74AC2518-Input Multiplexer with 3-STATE OutputFairchild Semiconductor
Fairchild Semiconductor
74AC251MTC8-Input Multiplexer with 3-STATE OutputFairchild Semiconductor
Fairchild Semiconductor
74AC251PC8-Input Multiplexer with 3-STATE OutputFairchild Semiconductor
Fairchild Semiconductor
74AC251SC8-Input Multiplexer with 3-STATE OutputFairchild Semiconductor
Fairchild Semiconductor

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск