|
|
Número de pieza | 66181 | |
Descripción | 30kV HIGH VOLTAGE ISOLATOR WITH BUFFERED OUTPUT | |
Fabricantes | Micropac Industries | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de 66181 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! 66181 30kV HIGH VOLTAGE ISOLATOR WITH BUFFERED OUTPUT
Mii
OPTOELECTRONIC
PRODUCTS
DIVISION
Features:
• 10 Mhz bandwidth typical
• 30kVdc isolation test voltage
• TTL compatible input and output
• High common mode rejection
• Rugged ceramic package
Applications:
• Military and Space
• Voltage Level Shifting
• Grid Current Modulator
• Switching between power supplies
• Medical systems
DESCRIPTION
The 66181 high voltage isolator consisting of a LED optically coupled to a high speed, high gain inverting detector gate.
Output is TTL capable with switching propagation delays of 55ns typical, hermetically sealed in TO-46 packages and mounted
in a highly reliability, hermetically sealed ceramic package. Available in commercial (0° to +70°C), extended temperature range
(-40° to +85°) and full Military temperature range (-55° to +125°C). Contact the factory for special custom or multi-channel
requirements!
ABSOLUTE MAXIMUM RATINGS
Storage Temperature............................................................................................................................................-65°C to +150°C
Operating Free-Air Temperature Range ..............................................................................................................-55°C to +125°C
Lead Solder Temperature.........................................................................................260°C for 10s (1.6mm below seating plane)
Peak Forward Input Current ........................................................................................................................ 40mA (1ms duration)
Average Forward Input Current ............................................................................................................................................20mA
Input Power Dissipation .......................................................................................................................................................35mW
Reverse Input Voltage ...............................................................................................................................................................5V
Supply voltage - VCC ................................................................................................................................. 7V(1 minute maximum)
Output Current - IO ................................................................................................................................................................25mA
Output Power Dissipation ....................................................................................................................................................40mW
Output Voltage - VO ...................................................................................................................................................................7V
Total Power Dissipation .....................................................................................................................................................350mW
Package Dimensions
Schematic Diagram
Ø0.300 [7.62]
A (BLACK DOT)
K
GND (RED DOT)
CASE
Vout
Vcc
Ø0.018 [0.46]
TYP
A
VCC
Vout
2.220 [56.39]
K
GND
CASE
0.500 [12.70]
MIN
DIMENSIONS ARE INCHES(MILLIMETERS)
0.500 [12.70]
MIN
NOTE:
A.01 TO 0.1 F BYPASS
CAPACITOR MUST BE
CONNECTED BETWEEN
Vcc AND GROUND.
ENCAPSULATION IN A
SUITABLE EPOXY IS
REQUIRED TO MEET 30KV
ISOLATION VOLTAGE
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918
7-9
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet 66181.PDF ] |
Número de pieza | Descripción | Fabricantes |
66181 | 30kV HIGH VOLTAGE ISOLATOR WITH BUFFERED OUTPUT | Micropac Industries |
66181-001 | 30kV HIGH VOLTAGE ISOLATOR WITH BUFFERED OUTPUT | Micropac Industries |
66181-011 | 30kV HIGH VOLTAGE ISOLATOR WITH BUFFERED OUTPUT | Micropac Industries |
66181-101 | 30kV HIGH VOLTAGE ISOLATOR WITH BUFFERED OUTPUT | Micropac Industries |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |