DataSheet26.com

S3P70F4 PDF даташит

Спецификация S3P70F4 изготовлена ​​​​«Samsung semiconductor» и имеет функцию, называемую «The S3C70F2/C70F4 single-chip CMOS microcontroller has been designed for high-performance using Samsungs newest 4-bit CPU core/ SAM47 (Samsung Arrange».

Детали детали

Номер произв S3P70F4
Описание The S3C70F2/C70F4 single-chip CMOS microcontroller has been designed for high-performance using Samsungs newest 4-bit CPU core/ SAM47 (Samsung Arrange
Производители Samsung semiconductor
логотип Samsung semiconductor логотип 

30 Pages
scroll

No Preview Available !

S3P70F4 Даташит, Описание, Даташиты
S3C70F2/C70F4/P70F4
1 PRODUCT OVERVIEW
PRODUCT OVERVIEW
OVERVIEW
The S3C70F2/C70F4 single-chip CMOS microcontroller has been designed for high-performance using
Samsung's newest 4-bit CPU core, SAM47 (Samsung Arrangeable Microcontrollers).
The S3P70F4 is the microcontroller which has 4 Kbyte one-time-programmable ROM and the functions are the
same to S3C70F2/C70F4. With a four-channel comparator, eight LED direct drive pins, serial I/O interface, and
its versatile 8-bit timer/counter, the S3C70F2/C70F4 offers an excellent design solution for a wide variety of
general-purpose applications.
Up to 24 pins of the 30-pin SDIP package can be dedicated to I/O. Five vectored interrupts provide fast response
to internal and external events. In addition, the S3C70F2/C70F4's advanced CMOS technology provides for very
low power consumption and a wide operating voltage range — all at a very low cost.
1-1









No Preview Available !

S3P70F4 Даташит, Описание, Даташиты
PRODUCT OVERVIEW
FEATURES SUMMARY
Memory
512 × 4-bit data memory (RAM)
2048 × 8-bit program memory (ROM):S3C70F2
4096 × 8-bit program memory (ROM):S3C70F4
24 I/O Pins
I/O: 18 pins, including 8 high current pins
Input only: 6 pins
Comparator
4-channel mode:
Internal reference (4-bit resolution)
16-step variable reference voltage
3-channel mode:
External reference
150 mV resolution (worst case)
8-bit Basic Timer
Programmable interval timer
Watch-dog timer
8-bit Timer/Counter 0
Programmable interval timer
External event counter function
Timer/counter clock output to TCLO0 pin
Watch Timer
Time interval generation: 0.5 s, 3.9 ms at 4.19
MHz
4 frequency outputs to BUZ pin
8-bit Serial I/O Interface
8-bit transmit/receive mode
8-bit receive-only mode
LSB-first or MSB-first transmission selectable
Internal or external clock source
S3C70F2/C70F4/P70F4
Bit Sequential Carrier
Supports 16-bit serial data transfer in arbitrary
format
Interrupts
Two external interrupt vectors
Three internal interrupt vectors
Two quasi-interrupts
Memory-Mapped I/O Structure
Data memory bank 15
Two Power-Down Modes
Idle mode: Only CPU clock stops
Stop mode: System clock stops
OSCILLATION SOURCES
Crystal, Ceramic for system clock
Crystal/ceramic: 0.4 - 6.0 MHz
CPU clock divider circuit (by 4. 8, or 64)
Instruction Execution Times
0.95, 1.91, 15.3 µs at 4.19 MHz
0.67, 1.33, 10.7 µs at 6.0 MHz
Operating Temperature
– 40 °C to 85 °C
Operating Voltage Range
1.8 V to 5.5 V
Package Type
30 SDIP, 32 SOP
1-2









No Preview Available !

S3P70F4 Даташит, Описание, Даташиты
S3C70F2/C70F4/P70F4
PRODUCT OVERVIEW
FUNCTION OVERVIEW
SAM47 CPU
All S3C7-series microcontrollers have the advanced SAM47 CPU core. The SAM47 CPU can directly address up
to 32 K bytes of program memory. The arithmetic logic unit (ALU) performs 4-bit addition, subtraction, logical,
and shift-and-rotate operations in one instruction cycle and most 8-bit arithmetic and logical operations in two
cycles.
CPU REGISTERS
Program Counter
A 11-bit program counter (PC) stores addresses for instruction fetch during program execution. Usually, the PC is
incremented by the number of bytes of the instruction being fetched. An exception is the 1-byte instruction REF
which is used to reference instructions stored in a look-up table in the ROM. Whenever a reset operation or an
interrupt occurs, bits PC11 through PC0 are set to the vector address. Bit PC13–12 is reserved to support future
expansion of the device's ROM size.
Stack Pointer
An 8-bit stack pointer (SP) stores addresses for stack operations. The stack area is located in the general-
purpose data memory bank 0. The SP is read or written by 8-bit instructions and SP bit 0 must always be set to
logic zero.
During an interrupt or a subroutine call, the PC value and the program status word (PSW) are saved to the stack
area in RAM. When the service routine has completed, the values referenced by the stack pointer are restored.
Then, the next instruction is executed.
The stack pointer can access the stack regardless of data memory access enable flag status. Since the reset
value of the stack pointer is not defined in firmware, it is recommended that the stack pointer be initialized to 00H
by program code. This sets the first register of the stack area to data memory location 0FFH.
PROGRAM MEMORY
In its standard configuration, the 4096 × 8-bit ROM is divided into three functional areas:
— 16-byte area for vector addresses
— 96-byte instruction reference area
— 1920-byte general purpose area (S3C70F2)
— 3968-byte general purpose area (S3C70F4)
The vector address area is used mostly during reset operations and interrupts. These 16 bytes can also be used
as general-purpose ROM.
The REF instruction references 2 × 1-byte and 2-byte instructions stored in locations 0020H–007FH. The REF
instruction can also reference 3-byte instructions such as JP or CALL. In order for REF to be able to reference
these instructions, however, JP or CALL must be shortened to a 2-byte format. To do this, JP or CALL is written
to the reference area with the format TJP or TCALL instead of the normal instruction name. Unused locations in
the instruction reference area can be allocated to general-purpose use.
1-3










Скачать PDF:

[ S3P70F4.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
S3P70F4The S3C70F2/C70F4 single-chip CMOS microcontroller has been designed for high-performance using Samsungs newest 4-bit CPU core/ SAM47 (Samsung ArrangeSamsung semiconductor
Samsung semiconductor

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск