|
|
Número de pieza | SB05W05C | |
Descripción | 50V / 500mA Rectifier | |
Fabricantes | Sanyo Semicon Device | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SB05W05C (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! Ordering number : EN3611B
SB05W05C
SANYO Semiconductors
DATA SHEET
SB05W05C
Schottky Barrier Diode (Twin Type · Cathode Common)
50V, 500mA Rectifier
Applications
• Universal-use rectifier
• High frequency rectification (switching regulators, converters, choppers)
Features
• Low forward voltage (VF max=0.55V)
• Fast reverse recovery time (trr max=10ns)
• Low switching noise
• Low leakage current and high reliability due to highly reliable planar structure
• Small-sized package, permitting applied sets to be compact and slim
Specifications
Absolute Maximum Ratings at Ta=25°C (Value per element)
Parameter
Symbol
Conditions
Repetitive Peak Reverse Voltage
Nonrepetitive Peak Reverse Surge Voltage
Average Output Current
Surge Forward Current
Junction Temperature
VRRM
VRSM
IO
IFSM
Tj
50Hz sine wave, 1 cycle
Storage Temperature
Tstg
Ratings
50
55
500
5
--55 to +125
--55 to +125
Unit
V
V
mA
A
°C
°C
Package Dimensions
unit : mm (typ)
7013A-006
2.9
3
0.1
SB05W05C-TB-E
Product & Package Information
• Package
: CP
• JEITA, JEDEC
: SC-59, TO-236, SOT-23, TO-236AB
• Minimum Packing Quantity : 3,000 pcs./reel
Packing Type: TB
Marking
1
0.95
2
0.4
1 : Anode
2 : Anode
3 : Cathode
SANYO : CP
TB
Electrical Connection
3
P
12
http://semicon.sanyo.com/en/network
71812 TKIM/71598HA (KT)/12097GI/N120MH, JK (KOTO) 8-6450 No.3611-1/5
1 page SB05W05C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment. The products mentioned herein
shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal
system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten
human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they
grant any guarantee thereof. If you should intend to use our products for new introduction or other application
different from current conditions on the usage of automotive device, communication device, office equipment,
industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.)
prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be
solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are
not guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an
independent device, the customer should always evaluate and test devices mounted in the customer's
products or equipment.
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating
condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
Co.,Ltd. products described or contained herein.
Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature,
high current, high voltage, or drastic temperature change, even if it is used within the range of absolute
maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a
confirmation.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures
or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give
rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment,
adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but
are not limited to protective circuits and error prevention circuits for safe design, redundant design, and
structural design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or
otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Upon using the technical information or products described herein, neither warranty nor license shall be
granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any
third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third
party's intellectual property rights which has resulted from the use of the technical information and products
mentioned above.
This catalog provides information as of July, 2012. Specifications and information herein are subject
to change without notice.
PS No.3611-5/5
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet SB05W05C.PDF ] |
Número de pieza | Descripción | Fabricantes |
SB05W05 | 50V / 500mA Rectifier | Sanyo Semicon Device |
SB05W05 | Schottky Barrier Diode | ON Semiconductor |
SB05W05C | 50V / 500mA Rectifier | Sanyo Semicon Device |
SB05W05P | 50V / 500mA Rectifier | Sanyo Semicon Device |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |