|
|
Datasheet W49V002 Equivalent ( PDF ) |
| N.º | Número de pieza | Descripción | Fabricantes | Category |
| 1 | W49V002 | 256K X 8 CMOS FLASH MEMORY WITH FWH INTERFACE |  Winbond | cmos |
| 2 | W49V002 | 256K x 8 CMOS FLASH MEMORY WITH LPC INTERFACE Preliminary W49V002A 256K x 8 CMOS FLASH MEMORY WITH LPC INTERFACE
GENERAL DESCRIPTION The W49V002A is a 2 -megabit, 3.3-volt only CMOS flash memory organized as 256K × 8 bits. The device can be programmed and erased in-system with a standard 3.3V power supply. A 12-volt VPP is not required. The un | Winbond | cmos |
| 3 | W49V002A | 256K x 8 CMOS FLASH MEMORY WITH LPC INTERFACE Preliminary W49V002A 256K x 8 CMOS FLASH MEMORY WITH LPC INTERFACE
GENERAL DESCRIPTION The W49V002A is a 2 -megabit, 3.3-volt only CMOS flash memory organized as 256K × 8 bits. The device can be programmed and erased in-system with a standard 3.3V power supply. A 12-volt VPP is not required. The un | Winbond | cmos |
| 4 | W49V002AP | 256K x 8 CMOS FLASH MEMORY WITH LPC INTERFACE Preliminary W49V002A 256K x 8 CMOS FLASH MEMORY WITH LPC INTERFACE
GENERAL DESCRIPTION The W49V002A is a 2 -megabit, 3.3-volt only CMOS flash memory organized as 256K × 8 bits. The device can be programmed and erased in-system with a standard 3.3V power supply. A 12-volt VPP is not required. The un | Winbond | cmos |
| 5 | W49V002AQ | 256K x 8 CMOS FLASH MEMORY WITH LPC INTERFACE Preliminary W49V002A 256K x 8 CMOS FLASH MEMORY WITH LPC INTERFACE
GENERAL DESCRIPTION The W49V002A is a 2 -megabit, 3.3-volt only CMOS flash memory organized as 256K × 8 bits. The device can be programmed and erased in-system with a standard 3.3V power supply. A 12-volt VPP is not required. The un | Winbond | cmos |
W49 Datasheet ( Hoja de datos ) - resultados coincidentes |
| N.º | Número de pieza | Descripción | Fabricantes | Catagory |
| 1 | W49F002 | 256K X 8 CMOS FLASH MEMORY Winbond cmos | | |
| 2 | W49F002A | 256K x 8 CMOS Flash Memory Preliminary W49F002A 256K × 8 CMOS FLASH MEMORY
GENERAL DESCRIPTION
The W49F002A is a 2-megabit, 5-volt only CMOS flash memory organized as 256K × 8 bits. The device can be programmed and erased in-system with a standard 5V power supply. A 12-volt VPP is not required. The unique cell architecture Winbond cmos | | |
| 3 | W49F002U | 256K X 8 CMOS FLASH MEMORY Winbond cmos | | |
| 4 | W49F002U-12B | 256K X 8 CMOS FLASH MEMORY Winbond cmos | | |
| 5 | W49F002U-70B | 256K X 8 CMOS FLASH MEMORY Winbond cmos | | |
| 6 | W49F002U-90B | 256K X 8 CMOS FLASH MEMORY Winbond cmos | | |
| 7 | W49F002UP12B | 256K X 8 CMOS FLASH MEMORY Winbond cmos | |
| Esta página es del resultado de búsqueda del W49V002. Si pulsa el resultado de búsqueda de W49V002 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
nuevas actualizaciones
| Número de pieza | Descripción | Fabricantes | |
| SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
 Sanken |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |