DataSheet.es    


PDF W83783S Data sheet ( Hoja de datos )

Número de pieza W83783S
Descripción MONITORING IC
Fabricantes Winbond 
Logotipo Winbond Logotipo



Hay una vista previa y un enlace de descarga de W83783S (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! W83783S Hoja de datos, Descripción, Manual

W83783S
Winbond H/W
Monitoring IC

1 page




W83783S pdf
W83783S
Preliminary
7.32 Temperature Sensor 1 Hysteresis (Low Byte) Register - Index 02h .....................................................41
7.33 Temperature Sensor 1 Over-temperature (High Byte) Register - Index 03h.........................................42
7.34 Temperature Sensor 1 Over-temperature (Low Byte) Register - Index 03h .........................................42
7.35 Reserved Register -- Index 50h--52h (BANK4) .................................................................................43
7.36 BEEP Control Register 3 -- Index 53h (Bank 4) .................................................................................43
7.37 Reserved Register -- Index 54h--58h (Bank 4)....................................................................................43
7.38 Real Time Hardware Status Register I -- Index 59h (Bank 4) .............................................................43
7.39 Real Time Hardware Status Register II -- Index 5Ah (Bank 4) ...........................................................44
8. SPECIFICATIONS ...................................................................................................................................46
8.1 Absolute Maximum Ratings.................................................................................................................46
8.2 DC Characteristics...............................................................................................................................46
8.3 AC Characteristics...............................................................................................................................48
8.3.1 Serial Bus Timing Diagram ...........................................................................................................48
9. HOW TO READ THE TOP MARKING .................................................................................................49
10. PACKAGE DIMENTIONS.....................................................................................................................50
11. APPLICATION CIRCUIT OF WINBOND W83783S...........................................................................52
- III -
Publication Release Date: April 1999
Version
0.55

5 Page





W83783S arduino
W83783S
Preliminary
6. FUNCTIONAL DESCRIPTION
6.1 General Description
The W83783S provides at most 6 analog positive inputs, 3 fan speed monitors, 2 sets for fan PWM
(Pulse Width Modulation) control, 2 thermal inputs from remote thermistors or 2N3904 transistors or
PentiumTM II (Deschutes) thermal diode outputs and beep function output when the monitor value
exceed the set limit value including voltage, temperature, or fan counter. When start the monitor
function on the chip, the watch dog machine monitor every function and store the value to registers. If
the monitor value exceeds the limit value, the interrupt status will be set to 1.
6.2 Access Interface
The W83783S provides I2C Serial Bus to read/write internal reigsters. In the W83783S there are two
serial bus address. The first address defined at CR[48h] can read/write all registers excluding Bank 1
temperature sensor registers and the address default value is 0101101. The second address defined
at CR[4Ah] bit2-0 only read/write temperature sensor 1 registers and the address default value is
1001001.
6.2.1 The first serial bus access timing are shown as follow:
(a) Serial bus write to internal address register followed by the data byte
SCL
0
780
78
SDA
Start By
Master
0
10110
Frame 1
Serial Bus Address Byte
SCL (Continued)
1 R/W
D7 D6 D5 D4 D3 D2 D1 D0
Ack
by Frame 2
781D Internal Index Register Byte
Ack
by
781D
0
78
SDA (Continued)
D7 D6 D5 D4 D3 D2 D1 D0
Frame 3
Data Byte
Ack
by
781D
Stop
by
Master
Figure 1. Serial Bus Write to Internal Address Register followed by the Data Byte
Publication Release Date: April 1999
- 6 - Revision 0.55

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet W83783S.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
W83783GMonitoring ICWinbond
Winbond
W83783SMONITORING ICWinbond
Winbond

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar