DataSheet39.com

What is ZPD3.3?

This electronic component, produced by the manufacturer "Diotec Semiconductor", performs the same function as "Silicon-Planar-Zener-Diodes".


ZPD3.3 Datasheet PDF - Diotec Semiconductor

Part Number ZPD3.3
Description Silicon-Planar-Zener-Diodes
Manufacturers Diotec Semiconductor 
Logo Diotec Semiconductor Logo 


There is a preview and ZPD3.3 download ( pdf file ) link at the bottom of this page.





Total 2 Pages



Preview 1 page

No Preview Available ! ZPD3.3 datasheet, circuit

ZPD 1…ZPD 75 (0.5 W)
Silicon-Planar-Zener-Diodes
Silizium-Planar-Zener-Dioden
Dimensions / Maße in mm
Maximum power dissipation
Maximale Verlustleistung
Nominal Z-voltage – Nominale Z-Spannung
Standard tolerance of Zener voltage
Standard-Toleranz der Zener Spannung
Glass case
Glasgehäuse
Weight approx. – Gewicht ca.
Standard packaging taped in ammo pack
Standard Lieferform gegurtet in Ammo-Pack
0.5 W
1…75 V
~ 5 % (E24)
DO-35
SOD-27
0.13 g
see page 16
siehe Seite 16
Standard Zener voltage tolerance is graded to the international E 24 (~5%) standard.
Other voltage tolerances and higher Zener voltages on request.
Die Toleranz der Z-Spannung ist in der Standard-Ausführung gestuft nach der internationalen
Reihe E 24 (~5%). Andere Toleranzen oder höhere Arbeitsspannungen auf Anfrage.
Maximum ratings and Characteristics
Grenz- und Kennwerte
Power dissipation
Verlustleistung
TA = 50/C
Ptot
0.5 W 1)
Operating junction temperature – Sperrschichttemperatur
Storage temperature – Lagerungstemperatur
Thermal resistance junction to ambient air
Wärmewiderstand Sperrschicht – umgebende Luft
Tj – 50...+175/C
TS – 50...+175/C
RthA < 0.3 K/mW 1)
Zener voltages see table on next page – Zener-Spannungen siehe Tabelle auf der nächsten Seite
1) Valid, if leads are kept at ambient temperature at a distance of 10 mm from case
Gültig, wenn die Anschlußdrähte in 10 mm Abstand vom Gehäuse auf Umgebungstemperatur gehalten werden
2) Tested with pulses tp = 20 ms – Gemessen mit 20 ms-Impulsen
3) The ZPD 1 is a diode, operated in forward. The cathode, indicated by a ring, is to be connected to the negative pole.
Die ZPD 1 ist eine in Durchlaß betriebene Einzelchip-Diode.
Die durch den Ring gekennzeichnete Kathode ist mit dem Minuspol zu verbinden.
210 28.02.2002


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for ZPD3.3 electronic component.


Information Total 2 Pages
Link URL [ Copy URL to Clipboard ]
Download [ ZPD3.3.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
ZPD3.0The function is Silicon-Planar-Zener-Diodes. Diotec SemiconductorDiotec Semiconductor
ZPD3.0The function is Diode Zener Single 3V 7% 500mW 2-Pin DO-35. New Jersey SemiconductorNew Jersey Semiconductor
ZPD3.3The function is Zener Diode ( Rectifier ). General SemiconductorGeneral Semiconductor

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

ZPD3     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search