|
|
Número de pieza | 74HCT2G125DC | |
Descripción | Dual buffer/line driver; 3-state | |
Fabricantes | Philips | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de 74HCT2G125DC (archivo pdf) en la parte inferior de esta página. Total 20 Páginas | ||
No Preview Available ! INTEGRATED CIRCUITS
DATA SHEET
74HC2G125; 74HCT2G125
Dual buffer/line driver; 3-state
Product specification
Supersedes data of 2003 Jan 31
2003 Mar 03
1 page Philips Semiconductors
Dual buffer/line driver; 3-state
Product specification
74HC2G125; 74HCT2G125
RECOMMENDED OPERATING CONDITIONS
SYMBOL
PARAMETER
VCC
VI
VO
Tamb
supply voltage
input voltage
output voltage
operating ambient
temperature
tr, tf input rise and fall times
CONDITIONS
74HC2G125
74HCT2G125
UNIT
MIN. TYP. MAX. MIN. TYP. MAX.
2.0 5.0 6.0 4.5 5.0 5.5 V
0 − VCC 0 − VCC V
0 − VCC 0 − VCC V
see DC and AC −40 +25 +125 −40 +25 +125 °C
characteristics per
device
VCC = 2.0 V
VCC = 4.5 V
VCC = 6.0 V
− − 1000 − − − ns
− 6.0 500 − 6.0 500 ns
− − 400 − − − ns
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referenced to GND (ground = 0 V).
SYMBOL
PARAMETER
VCC supply voltage
IIK input diode current
IOK output diode current
IO output source or sink
current
ICC, IGND
Tstg
PD
VCC or GND current
storage temperature
power dissipation per
package
CONDITIONS
VI < −0.5 V or VI > VCC + 0.5 V; note 1
VO < −0.5 V or VO > VCC + 0.5 V; note 1
−0.5 V < VO < VCC + 0.5 V; note 1
MIN.
−0.5
−
−
−
MAX.
+7.0
±20
±20
25
UNIT
V
mA
mA
mA
note 1
for temperature range from −40 to +125 °C;
note 2
−
−65
−
50
+150
300
mA
°C
mW
Notes
1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. Above 110 °C the value of PD derates linearly with 8 mW/K.
2003 Mar 03
5
5 Page Philips Semiconductors
Dual buffer/line driver; 3-state
Product specification
74HC2G125; 74HCT2G125
handbook, full pagewidth
VI
nOE input
GND
VCC
output
LOW-to-OFF
OFF-to-LOW
VOL
VOH
output
HIGH-to-OFF
OFF-to-HIGH
GND
VM
tPLZ
tPZL
tPHZ
VX
VY
VM
tPZH
VM
outputs
enabled
outputs
disabled
outputs
enabled
MNA362
For 74HC2G125: VM = 50%; VI = GND to VCC.
For 74HCT2G125: VM = 1.3 V; VI = GND to 3.0 V.
Fig.6 The 3-state enable and disable times.
handbook, full pagewidth
PULSE
GENERATOR
VI
VCC
VO
D.U.T.
RT
S1
RL =
1000 Ω
VCC
open
GND
CL
MNA232
TEST
tPLH/tPHL
tPLZ/tPZL
tPHZ/tPZH
S1
open
VCC
GND
2003 Mar 03
Definitions for test circuit:
CL = load capacitance including jig and probe capacitance (see “AC characteristics”).
RL = Load resistance.
RT = termination resistance should be equal to the output impedance Zo of the pulse generator.
Fig.7 Load circuitry for switching times.
11
11 Page |
Páginas | Total 20 Páginas | |
PDF Descargar | [ Datasheet 74HCT2G125DC.PDF ] |
Número de pieza | Descripción | Fabricantes |
74HCT2G125DC | Dual buffer/line driver; 3-state | Philips |
74HCT2G125DC | Dual buffer/line driver; 3-state | Philips |
74HCT2G125DP | Dual buffer/line driver; 3-state | Philips |
74HCT2G125DP | Dual buffer/line driver; 3-state | Philips |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |