|
|
Número de pieza | 74LVC827A | |
Descripción | 10-bit buffer/line driver with 5-volt tolerant inputs/outputs 3-State | |
Fabricantes | NXP Semiconductors | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de 74LVC827A (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
No Preview Available ! INTEGRATED CIRCUITS
74LVC827A
10-bit buffer/line driver with 5-volt tolerant
inputs/outputs (3-State)
Poduct specification
1998 Sep 04
Philips
Semiconductors
1 page Philips Semiconductors
10-bit buffer/line driver with 5-volt tolerant
inputs/outputs (3-State)
Product specification
74LVC827A
ABSOLUTE MAXIMUM RATINGS1
In accordance with the Absolute Maximum Rating System (IEC 134)
Voltages are referenced to GND (ground = 0V)
SYMBOL
PARAMETER
CONDITIONS
RATING
UNIT
VCC DC supply voltage
IIK DC input diode current
VI t0
VI DC input voltage
Note 2
IOK DC output diode current
VO uVCC or VO t 0
DC output voltage; output HIGH or LOW state Note 2
VO DC output voltage; output 3-State
Note 2
–0.5 to +6.5
–50
–0.5 to +6.5
"50
–0.5 to VCC +0.5
–0.5 to 6.5
V
mA
V
mA
V
IO DC output source or sink current
VO = 0 to VCC
"50
mA
IGND, ICC
Tstg
PTOT
DC VCC or GND current
Storage temperature range
Power dissipation per package
– plastic mini-pack (SO)
– plastic shrink mini-pack (SSOP and TSSOP)
above +70°C derate linearly with 8 mW/K
above +60°C derate linearly with 5.5 mW/K
"100
–65 to +150
500
500
mA
°C
mW
NOTES:
1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability.
2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
DC ELECTRICAL CHARACTERISTICS
Over recommended operating conditions voltages are referenced to GND (ground = 0V)
LIMITS
SYMBOL
PARAMETER
TEST CONDITIONS
Temp = -40°C to +85°C
MIN TYP1 MAX
VIH HIGH level Input voltage
VCC = 1.2V
VCC = 2.7 to 3.6V
VCC
2.0
VIL LOW level Input voltage
VCC = 1.2V
VCC = 2.7 to 3.6V
VCC = 2.7V; VI = VIH or VIL; IO = –12mA
VCC*0.5
VOH HIGH level output voltage
VCC = 3.0V; VI = VIH or VIL; IO = –100µA
VCC = 3.0V; VI = VIH or VIL; IO = –18mA
VCC*0.2
VCC*0.6
VCC = 3.0V; VI = VIH or VIL; IO = –24mA
VCC*0.8
VCC = 2.7V; VI = VIH or VIL; IO = 12mA
VOL LOW level output voltage
VCC = 3.0V; VI = VIH or VIL; IO = 100µA
VCC = 3.0V; VI = VIH or VIL; IO = 24mA
NOTES:
1. All typical values are at VCC = 3.3V and Tamb = 25°C.
2. The specified overdrive current at the data input forces the data input to the opposite logic input state.
VCC
GND
0.8
0.40
0.20
0.55
UNIT
V
V
V
V
1998 Sep 04
5
5 Page Philips Semiconductors
10-bit buffer/line driver with 5-volt tolerant
inputs/outputs (3-State)
NOTES
Product specification
74LVC827A
1998 Sep 04
11
11 Page |
Páginas | Total 12 Páginas | |
PDF Descargar | [ Datasheet 74LVC827A.PDF ] |
Número de pieza | Descripción | Fabricantes |
74LVC827 | 10-bit buffer/line driver with 5-volt tolerant inputs/outputs 3-State | NXP Semiconductors |
74LVC827A | 10-bit buffer/line driver with 5-volt tolerant inputs/outputs 3-State | NXP Semiconductors |
74LVC827AD | 10-bit buffer/line driver with 5-volt tolerant inputs/outputs 3-State | NXP Semiconductors |
74LVC827ADB | 10-bit buffer/line driver with 5-volt tolerant inputs/outputs 3-State | NXP Semiconductors |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |