|
|
Número de pieza | 74VCX162374 | |
Descripción | Low Voltage 16-Bit D-Type Flip-Flop with 3.6V Tolerant Inputs and Outputs and 26 Series Resistors in Outputs | |
Fabricantes | Fairchild Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de 74VCX162374 (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
No Preview Available ! January 2000
Revised January 2000
74VCX162374
Low Voltage 16-Bit D-Type Flip-Flop
with 3.6V Tolerant Inputs and Outputs
and 26Ω Series Resistors in Outputs
General Description
The VCX162374 contains sixteen non-inverting D-type flip-
flops with 3-STATE outputs and is intended for bus oriented
applications. The device is byte controlled. A buffered clock
(CP) and output enable (OE) are common to each byte and
can be shorted together for full 16-bit operation.
The VCX162374 is also designed with 26Ω series resistors
in the outputs. This design reduces line noise in applica-
tions such as memory address drivers, clock drivers and
bus transceivers/transmitters.
The 74VCX162374 is designed for low voltage (1.65V to
3.6V) VCC applications with I/O compatibility up to 3.6V.
The 74VCX162374 is fabricated with an advanced CMOS
technology to achieve high speed operation while maintain-
ing low CMOS power dissipation.
Features
s 1.65V–3.6V VCC supply operation
s 3.6V tolerant inputs and outputs
s 26Ω series resistors in outputs
s tPD (CLK to On)
3.4 ns max for 3.0V to 3.6V VCC
4.8 ns max for 2.3V to 2.7V VCC
9.6 ns max for 1.65V to 1.95V VCC
s Power-off high impedance inputs and outputs
s Supports live insertion and withdrawal (Note 1)
s Static Drive (IOH/IOL)
±12 mA @ 3.0V VCC
±8 mA @ 2.3V VCC
±3 mA @ 1.65V VCC
s Uses patented noise/EMI reduction circuitry
s Latch-up performance exceeds 300 mA
s ESD performance:
Human body model > 2000V
Machine model > 200V
Note 1: To ensure the high-impedance state during power up or power
down, OE should be tied to VCC through a pull-up resistor; the minimum
value of the resistor is determined by the current-sourcing capability of the
driver.
Ordering Code:
Order Number
Package
Number
Package Descriptions
74VCX162374MTD
MTD48
48-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide
Devices also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code.
Logic Symbol
Pin Descriptions
Pin Names
OEn
CPn
I0–I15
O0–O15
Description
Output Enable Input (Active LOW)
Clock Pulse Input
Inputs
Outputs
© 2000 Fairchild Semiconductor Corporation DS500235
www.fairchildsemi.com
1 page AC Electrical Characteristics (Note 8)
TA = −40°C to +85°C, CL = 30 pF, RL = 500Ω
Symbol
Parameter
VCC = 3.3V ± 0.3V
VCC = 2.5V ± 0.2V
VCC = 1.8V ± 0.15V
Units
Min Max Min Max Min Max
fMAX
Maximum Clock Frequency
250
200
100 MHz
tPHL, tPLH Prop Delay CP to On
0.8 3.4 1.0 4.8 1.5 9.6 ns
tPZL, tPZH Output Enable Time
0.8 3.9 1.0 5.4 1.5 9.8 ns
tPLZ, tPHZ Output Disable Time
0.8 4.0 1.0 4.4 1.5 7.9 ns
tS Setup Time
1.5 1.5 2.5
ns
tH Hold Time
1.0 1.0 1.0
ns
tW Pulse Width
1.5 1.5 4.0 ns
tOSHL
tOSLH
Output to Output Skew
(Note 9)
0.5 0.5 0.75 ns
Note 8: For CL = 50PF, add approximately 300 ps to the AC maximum specification.
Note 9: Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The
specification applies to any outputs switching in the same direction, either HIGH-to-LOW (tOSHL) or LOW-to-HIGH (tOSLH).
Dynamic Switching Characteristics
Symbol
Parameter
VOLP
Quiet Output Dynamic Peak VOL
VOLV
Quiet Output Dynamic Valley VOL
VOHV
Quiet Output Dynamic Valley VOH
Conditions
CL = 30 pF, VIH = VCC, VIL = 0V
CL = 30 pF, VIH = VCC, VIL = 0V
CL = 30 pF, VIH = VCC, VIL = 0V
V CC
(V)
1.8
2.5
3.3
1.8
2.5
3.3
1.8
2.5
3.3
TA = +25°C
Typical
0.15
0.25
0.35
−0.15
−0.25
−0.35
1.55
2.05
2.65
Units
V
V
V
Capacitance
Symbol
Parameter
CIN
COUT
CPD
Input Capacitance
Output Capacitance
Power Dissipation Capacitance
Conditions
VCC = 1.8V, 2.5V or 3.3V, VI = 0V or VCC
VI = 0V or VCC, VCC = 1.8V, 2.5V or 3.3V
VI = 0V or VCC, f = 10 MHz,
VCC = 1.8V, 2.5V or 3.3V
TA = +25°C
Typical
6
7
20
Units
pF
pF
pF
5 www.fairchildsemi.com
5 Page |
Páginas | Total 7 Páginas | |
PDF Descargar | [ Datasheet 74VCX162374.PDF ] |
Número de pieza | Descripción | Fabricantes |
74VCX162373 | Low Voltage 16-Bit Transparent Latch with 3.6V Tolerant Inputs and Outputs and 26 Series Resistors in Outputs | Fairchild Semiconductor |
74VCX162374 | Low Voltage 16-Bit D-Type Flip-Flop with 3.6V Tolerant Inputs and Outputs and 26 Series Resistors in Outputs | Fairchild Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |