DataSheet26.com

NJG1523KB2 PDF даташит

Спецификация NJG1523KB2 изготовлена ​​​​«New Japan Radio» и имеет функцию, называемую «SPDT SWITCH GaAs MMIC».

Детали детали

Номер произв NJG1523KB2
Описание SPDT SWITCH GaAs MMIC
Производители New Japan Radio
логотип New Japan Radio логотип 

11 Pages
scroll

No Preview Available !

NJG1523KB2 Даташит, Описание, Даташиты
NJG1523KB2
SPDT SWITCH GaAs MMIC
nGENERAL DESCRIPTION
NJG1523KB2 is a SPDT switch IC featured low insertion
loss, medium handling power and high isolation.
This device is suitable for switching of Tx/Rx signals at
sub-microwave applications.
This switch exhibits wide frequency range from 50MHz to
3.0GHz at low operating voltage of 2.5V, and is operated
up to 25dBm at 3.0V operating voltage.
The ultra small & ultra thin FLP6 package is applied.
nPACKAGE OUTLINE
NJG1523KB2
nFEATURES
lSingle low voltage control
lLow insertion loss
lHigh isolation
lHandling power
lLow current consumption
lUltra small & ultra thin package
+2.5~+6.5V
0.4dB typ. @f=1GHz, Pin=23dBm
0.5dB typ. @f=2GHz, Pin=23dBm
29dB typ. @f=2GHz, Pin=23dBm
25dBm max. @f=2GHz, VCTL=3.0V
8uA typ. @f=0.05~2.5GHz, Pin=23dBm
FLP6-B2 (Mount Size: 2.1x2.0x0.75mm)
nPIN CONFIGURATION
KB2 Type
Top view
Orientation Mark
Pin connection
1 6 1.P1
2.GND
2 5 3.P2
4.VCTL2
5.PC
3 4 6.VCTL1
nTRUTH TABLE
VCTL1
VCTL2
PC – P1
PC – P2
H
L
ON
OFF
“H”=VCTL (H), “L”=VCTL (L)
LL
HL
OFF
Insertion loss=17dB
P1 return Loss=2dB
ON
Insertion loss=17dB
P2 return Loss=2dB
H
H
Insertion loss=18dB
P1 return Loss=2dB
Insertion loss=18dB
P2 return Loss=2dB
Note: The values of insertion losses and return losses are the typical values at 2GHz.
-1-









No Preview Available !

NJG1523KB2 Даташит, Описание, Даташиты
NJG1523KB2
nABSOLUTE MAXIMUM RATINGS
PARAMETER
Input Power
Control Voltage
Power Dissipation
Operating Temp.
Storage Temp.
SYMBOL
CONDITIONS
Pin
VCTL
VCTL (L)=0V, VCTL (H)=2.7V
VCTL (H)-VCTL (L)
PD
Topr
Tstg
(Ta=25°C)
RATINGS UNITS
32 dBm
7.5 V
450 mW
-30~+85
°C
-55~+125
°C
nELECTRICAL CHARACTERISTICS
PARAMETERS
SYMBOL
(VCTL (L)=0V, VCTL (H)=2.7V, ZS=Zl=50, C6=10pF, Ta=25°C)
CONDITIONS
MIN TYP MAX UNITS
Operating voltage (LOW)
Operating voltage (HIGH)
Control current
Insertion loss 1
Insertion loss 2
Isolation 1
(PC-P1, PC-P2, P1-P2)
Isolation 2
(PC-P1, PC-P2, P1-P2)
Maximum input power 1*
VCTL (L)
VCTL (H)
ICTL
LOSS1
LOSS2
ISL1
ISL2
Pin1
f=2.0GHz, Pin=23dBm
f=1GHz, Pin=23dBm
f=2GHz, Pin=23dBm
f=1GHz, Pin=23dBm
f=2GHz, Pin=23dBm
VCTL (H)=2.7V, f=2GHz
-0.2 0 0.2
2.5 2.7 6.5
- 8 14
- 0.4 0.7
- 0.5 0.8
27 29
-
V
V
uA
dB
dB
dB
26 29
-
dB
- - 24.0 dBm
Maximum input power 2*
Pin2 VCTL (H)=3.0V, f=2GHz
- - 25.0 dBm
Maximum input power 3*
Pin at 1dB
compression point
VSWR (PC, P1, P2)
Pin3
P-1dB
VSWR
VCTL (H)=6.5V, f=2GHz
f=2.0GHz
f=0.05~2.2GHz, ON State
- - 34.5 dBm
28 30.5 - dBm
- 1.4 1.6
Switching time
TSW fin=0.05~2.5GHz
- 20 -
ns
* Maximum input power: This value is defined as maximum input power of linear operating region
or damage free operating region
-2-









No Preview Available !

NJG1523KB2 Даташит, Описание, Даташиты
NJG1523KB2
nTERMINAL INFORMATION
No. SYMBOL
DESCRIPTION
1 P1
RF port. This port is connected with PC port by controlling 6th pin (VCTL(H))
to 2.5~6.5V and 4th pin(VCTL(L)) to -0.2~+0.2V. An external capacitor is
required to block the DC bias voltage of internal circuit. (50~100MHz:
0.01uF, 0.1~0.5GHz: 1000pF, 0.5~2.5GHz: 56pF)
2 GND
3 P2
Ground terminal. Please connect this terminal with ground plane as close
as possible for excellent RF performance.
RF port. This port is connected with PC port by controlling 4th pin (VCTL (H))
to 2.5~6.5V and 6th pin(VCTL(L)) to -0.2~+0.2V. An external capacitor is
required to block the DC bias voltage of internal circuit. (50~100MHz:
0.01uF, 0.1~0.5GHz: 1000pF, 0.5~2.5GHz: 56pF)
Control port 2. The voltage of this port controls PC to P2 state. The ‘ON’
4 VCTL2
and ‘OFF’ state is toggled by controlling voltage of this terminal such as
high-state (2.5~6.5V) or low-state (-0.2~+0.2V). The voltage of 6th pin
have to be set to opposite state. The bypass capacitor has to be chosen
to reduce switching time delay from 10pF~1000pF range.
Common RF port. In order to block the DC bias voltage of internal circuit,
5 PC
an external capacitor is required. (50~100MHz:0.01uF, 0.1~0.5GHz:
1000pF, 0.5~2.5GHz: 56pF)
Control port 1. The voltage of this port controls PC to P2 state. The ‘ON’
6 VCTL1
and ‘OFF’ state is toggled by controlling voltage of this terminal such as
high-state (2.5~6.5V) or low-state (-0.2~+0.2V). The voltage of 4th pin
have to be set to opposite state. The bypass capacitor has to be chosen
to reduce switching time delay from 10pF~1000pF range.
-3-










Скачать PDF:

[ NJG1523KB2.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
NJG1523KB2SPDT SWITCH GaAs MMICNew Japan Radio
New Japan Radio

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск