|
|
PDF NTD15N06 Data sheet ( Hoja de datos )
| Número de pieza | NTD15N06 | |
| Descripción | Power MOSFET 15 Amps / 60 Volts | |
| Fabricantes | ON | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NTD15N06 (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
|
No Preview Available !
NTD15N06
Power MOSFET
15 Amps, 60 Volts
N−Channel DPAK
Designed for low voltage, high speed switching applications in
power supplies, converters and power motor controls and bridge
circuits.
Typical Applications
• Power Supplies
• Converters
• Power Motor Controls
• Bridge Circuits
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Rating
Symbol Value Unit
Drain−to−Source Voltage
Drain−to−Gate Voltage (RGS = 1.0 MW)
Gate−to−Source Voltage
− Continuous
− Non−repetitive (tpv10 ms)
Drain Current
− Continuous @ TA = 25°C
− Continuous @ TA = 100°C
− Single Pulse (tpv10 ms)
Total Power Dissipation @ TJ = 25°C
Derate above 25°C
Total Power Dissipation @ TA = 25°C (Note 1)
Total Power Dissipation @ TA = 25°C (Note 2)
Operating and Storage Temperature Range
VDSS
VDGR
VGS
VGS
60
60
"20
"30
Vdc
Vdc
Vdc
ID 15 Adc
ID 10
IDM 45 Apk
PD 48 W
0.32 W/°C
2.1 W
1.5 W
TJ, Tstg − 55 to °C
+175
Single Pulse Drain−to−Source Avalanche
Energy − Starting TJ = 25°C
(VDD = 25 Vdc, VGS = 10 Vdc, L = 1.0 mH,
IL(pk) = 11 A, VDS = 60 Vdc)
Thermal Resistance
− Junction−to−Case
− Junction−to−Ambient (Note 1)
− Junction−to−Ambient (Note 2)
EAS mJ
61
RqJC
RqJA
RqJA
°C/W
3.13
71.4
100
Maximum Lead Temperature for Soldering
Purposes, 1/8″ from case for 10 seconds
TL 260 °C
1. When surface mounted to an FR4 board using 0.5 sq. in. pad size.
2. When surface mounted to an FR4 board using the minimum recommended
pad size.
http://onsemi.com
15 AMPERES
60 VOLTS
RDS(on) = 76 mW (TYP)
N−Channel
D
G
4
12
3
DPAK
CASE 369C
(Surface Mount)
Style 2
4
S
MARKING DIAGRAMS
4
Drain
1
Gate
2
Drain
3
Source
4
Drain
1
2
3
DPAK
CASE 369D
(Straight Lead)
Style 2
15N06 Device Code
Y = Year
WW = Work Week
12 3
Gate Drain Source
ORDERING INFORMATION
Device
Package
Shipping
NTD15N06
DPAK
75 Units/Rail
NTD15N06−1
DPAK
Straight Lead
75 Units/Rail
NTD15N06T4
DPAK
2500/Tape & Reel
© Semiconductor Components Industries, LLC, 2003
September, 2003 − Rev. 1
1
Publication Order Number:
NTD15N06/D
1 page  
NTD15N06
12
10
8
Q1
6
4
QT
Q2
VGS
100
VDS = 30 V
ID = 15 A
VGS = 10 V
tr
10 td(off)
td(on)
tf
2
0
024
ID = 15 A
TJ = 25°C
6 8 10 12
QG, TOTAL GATE CHARGE (nC)
Figure 8. Gate−To−Source and Drain−To−Source
Voltage versus Total Charge
1
1 10
RG, GATE RESISTANCE (W)
Figure 9. Resistive Switching Time
Variation versus Gate Resistance
DRAIN−TO−SOURCE DIODE CHARACTERISTICS
16
VGS = 0 V
TJ = 25°C
12
100
8
4
0
0.6 0.68 0.76 0.84 0.92
VSD, SOURCE−TO−DRAIN VOLTAGE (VOLTS)
1
Figure 10. Diode Forward Voltage versus Current
SAFE OPERATING AREA
The Forward Biased Safe Operating Area curves define
the maximum simultaneous drain−to−source voltage and
drain current that a transistor can handle safely when it is
forward biased. Curves are based upon maximum peak
junction temperature and a case temperature (TC) of 25°C.
Peak repetitive pulsed power limits are determined by using
the thermal response data in conjunction with the procedures
discussed in AN569, “Transient Thermal Resistance −
General Data and Its Use.”
Switching between the off−state and the on−state may
traverse any load line provided neither rated peak current
(IDM) nor rated voltage (VDSS) is exceeded and the
transition time (tr,tf) do not exceed 10 ms. In addition the total
power averaged over a complete switching cycle must not
exceed (TJ(MAX) − TC)/(RqJC).
A Power MOSFET designated E−FET can be safely used
in switching circuits with unclamped inductive loads. For
reliable operation, the stored energy from circuit inductance
dissipated in the transistor while in avalanche must be less
than the rated limit and adjusted for operating conditions
differing from those specified. Although industry practice is
to rate in terms of energy, avalanche energy capability is not
a constant. The energy rating decreases non−linearly with an
increase of peak current in avalanche and peak junction
temperature.
Although many E−FETs can withstand the stress of
drain−to−source avalanche at currents up to rated pulsed
current (IDM), the energy rating is specified at rated
continuous current (ID), in accordance with industry custom.
The energy rating must be derated for temperature as shown
in the accompanying graph (Figure 12). Maximum energy at
currents below rated continuous ID can safely be assumed to
equal the values indicated.
http://onsemi.com
5
5 Page | ||
| Páginas | Total 10 Páginas | |
| PDF Descargar | [ Datasheet NTD15N06.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NTD15N06 | Power MOSFET 15 Amps / 60 Volts | ON |
| NTD15N06T4 | Power MOSFET 15 Amps / 60 Volts | ON |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |