DataSheet26.com

NTE1635 PDF даташит

Спецификация NTE1635 изготовлена ​​​​«NTE» и имеет функцию, называемую «Integrated Circuit Speaker Protector/Voltage/Temperature/Overload».

Детали детали

Номер произв NTE1635
Описание Integrated Circuit Speaker Protector/Voltage/Temperature/Overload
Производители NTE
логотип NTE логотип 

3 Pages
scroll

No Preview Available !

NTE1635 Даташит, Описание, Даташиты
NTE1635
Integrated Circuit
Speaker Protector/Voltage/Temperature/Overload
Description:
The NTE1635 is a monolithic integrated circuit in an 8–Lead SIP type package designed for use in
protecting power amplifiers and speakers in various amplifier and receiver applications.
Features:
D Built–In Relay Driver
D Single Power Source
D Wide Operating Supply Range: 25V to 60V
D Plus and Minus Voltage using One Pin (Both Pin3 and Pin4 Posses the Same Functions and
Detect Plus and Minus Voltage)
D AC Voltage Detector (Pin5)
D Circuit Protection by Plus Voltage Detection is Provided by Connecting D1 Diode Externally (Pin6)
D Relay–On Lag Time Adjustable by External Applications
D Short Relay–Off Time (25ms Typ Under the Standard External Applications)
Typical Applications:
D For Speaker Protection, use Pin3 (or Pin4) to Detect Setoff of Quiescent Output DC Voltage
and to Turn the Relay Off
D For Power Amplifier Protection, use Pin3 (or Pin4) with an External Thermo–Sensitive Device
to Detect the Temperature Increase and to Turn the Relay Off
D Power Amplifier can be Protected by Detecting Overload and Turning the Relay Off with Pin6
D In case of Overload Detection by Constant–Current or by Constant–Voltage Drive using an
External Diode D1, the Latch Mechanism keeps the Relay On until the Power is Switched Off
D For Prevention of Pop Noise at Power Off use Pin5. AC Voltage Disappeance is Immediately
Detected when the Amp’s Switch has been Off. This Minimizes the Relay–Off Time and thus
can Prevent Pop Noise Generated by Mute–Off Time Lag
Absolute Maximum Ratings: (TA = +25°C unless otherwise specified)
Total Power Disipation (TA = +70°C), PT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400mW
Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –20° to +70°C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –55° to +125°C
Supply Voltage (Pin1), VCC(max) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60V
Supply Current (Pin1), I1(max) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80mA









No Preview Available !

NTE1635 Даташит, Описание, Даташиты
Absolute Maximum Ratings (Cont’d): (TA = +25°C unless otherwise specified)
Supply Current (Pin3, Note 1), I3(max) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±3mA
Supply Current (Pin4, Note 1), I4(max) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±3mA
Supply Voltage (Pin5), V5(max) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10V
Supply Current (Pin6), I6(max) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3mA
Supply Voltage (Pin7, Note 2), V7(max) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8V
Supply Current (Pin7, Note 2), I7(max) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25mA
Supply Voltage (Pin8), V8(max) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Less than Pin7
Supply Current (Peak, Pin8), I8(max) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50mA
Note 1. Positive current denotes input current at Pin3 and Pin4, Negative current denotes output current
Note 2. V7(max) = 8V is derived when driven by a constant voltage source without any resistance.
When applying current to V7 throught a resistance VCC the maximum value of input current
to Pin7 should be used instead of the above values.
Electrical Characteristics: (VCC = +45V unless otherwise specified)
Parameter
Symbol
Test Conditions
Min Typ Max Unit
Threshold Voltage at Pin3,
Positive Side
+Vth(3)
Apply positive voltage to Pin3 through an ex-
ternal resistance (56k). Measure Pin3 volt-
age while Pin1 voltage changes from low (1V)
to high (45V) during the above process.
0.89
1.20
1.61
V
Threshold Voltage at Pin3,
Negative Side
Vth(3)
Apply negative voltage to Pin3 through an ex- 1.86 1.20 0.84
ternal resistance (56k). Measure Pin3 volt-
age while Pin1 voltage changes from low (1V)
to high (45V) during the above process.
V
Threshold Voltage at Pin4,
Positive Side
+Vth(4)
Apply positive voltage to Pin4 through an ex-
ternal resistance (56k). Measure Pin4 volt-
age while Pin1 voltage changes from low (1V)
to high (45V) during the above process.
0.89
1.20
1.61
V
Threshold Voltage at Pin4,
Negative Side
Vth(4)
Apply negative voltage to Pin4 through an ex- 1.86 1.20 0.84
ternal resistance (56k). Measure Pin4 volt-
age while Pin1 voltage changes from low (1V)
to high (45V) during the above process.
V
Threshold Voltage at Pin6
Vth(6)
Apply voltage to Pin6 through D1. Measure
voltage on Pin6 while Pin1 voltage changes
from low (1V) to high (45V) during the above
process.
0.90
1.15
1.40
V
Threshold AC Voltage at Pin5 VAC(on) Apply AC voltage to Pin5 through D2. Mea- 2.5 Vrms
sure AC voltage on Pin5 while Pin1 voltage
changes from low (1V) to high (45V) during
the above process.
Threshold Voltage at Pin5
Vth(5)
Apply voltage to Pin5 directly. Measure volt-
age on Pin5 when Pin1 voltage change from
low (1V) to High (45V) during the above pro-
cess.
1.8
1.2
0
V
Current Drain at Pin7
I(7) Measure Pin7 input current when turning 16.5 18.5 20.5 mA
relay on.









No Preview Available !

NTE1635 Даташит, Описание, Даташиты
Pin Connection Diagram
(Front View)
8 Positive Feedback
7 Bias
6 Overload Detector
5 AC Signal Detector
4 Neutral Port Detector
3 Temperature Detector
2 GND
1 Relay DR/VCC
.142 (3.6)
.362
(9.2)
1
.100 (2.54)
.800 (20.3)
8
.100 (2.54)
.020 (0.50)
.700 (17.78)










Скачать PDF:

[ NTE1635.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
NTE1630Integrated Circuit VCR Cylinder Motor DriverNTE
NTE
NTE1633Integrated Circuit TV Sound Channel w/DC ControlsNTE
NTE
NTE1634Integrated Circuit Dual Preamp w/ALCNTE
NTE
NTE1635Integrated Circuit Speaker Protector/Voltage/Temperature/OverloadNTE
NTE

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск