|
|
PDF NTE2028 Data sheet ( Hoja de datos )
| Número de pieza | NTE2028 | |
| Descripción | Integrated Circuit 7-Segment High Voltage Decoder/Driver | |
| Fabricantes | NTE | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NTE2028 (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
|
No Preview Available !
NTE2028
Integrated Circuit
7–Segment High Voltage Decoder/Driver
Description:
The NTE2028 is an integrated circuit in a 16–Lead DIP type package custom designed to decode
four lines of BCD and drive a gas–filled seven–segment display tube.
Each output constitutes a switchable, adjustable current sink which provides constant current to the
tube segment, even with high tube anode supply tolerance or fluctuation. These current sinks have
a voltage compliance from 3V to at least 80V; typically the output current varies 1% for output voltage
changes of 3 to 50V. Each bit line of the decoder switches a current sink on or off as prescribed by
the input code. Each current sink is ratioed to the b–output current as required for even illumination
of all segments.
Output currents may be varied over the 0.2 to 1.5 mA range for driving various tube types or multiplex
operation. The output current is adjusted by connecting an external program resistor (Rp) from VCC
to the Program input in accordance with the programming curve. The circuit design provides a one–
to–one correlation between program input current and b–segment output current.
The Blanking Input provides unconditional blanking of any output display, while the Ripple Blanking
pins allow simple leading or trailing zero blanking.
Features:
D Current Sink Outputs
D Adjustable Output Current: 0.2 to 1.5mA
D High Output Breakdown Voltage: 110V Typ
D Suitable for Multiplex Operation
D Blanking and Ripple Blanking Provisions
D Low Fan–In and Low Power
Absolute Maximum Raings: (Note 1)
Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7V
Input Voltage (Except BI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6V
Input Voltage (BI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC
Segment Output Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80V
Power Dissipation, PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600mW
Transient Segment Output Current (Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50mA
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65° to +150°C
Lead Temperature (During Soldering, 10sec), TL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +300°C
Note 1. “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot
be guaranteed. Except for “Operating Temperature Range” they are not meant to imply that
the device should be operated at these limits. The table of “Electrical Chracteristics” pro-
vides conditions for actual device operation.
Note 2. In all applications transient segment output current must be limited to 50mA. This may be
accomplished in DC applications by connecting a 2.2k resistor from the anode–supply filter
capacitor to the display anode, or by current limiting the anode driver in multiplex applica-
tions.
1 page | ||
| Páginas | Total 4 Páginas | |
| PDF Descargar | [ Datasheet NTE2028.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NTE2020 | Integrated Circuit 8-Channel Darlington Array/Driver | NTE |
| NTE2021 | Integrated Circuit 8-Digit/Segment Fluorescent Display Driver | NTE |
| NTE2022 | Integrated Circuit 8-Digit/Segment Fluorescent Display Driver | NTE |
| NTE2023 | Integrated Circuit General Purpose / High Current 7-Segment Display Driver | NTE |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |