DataSheet26.com

NTE2716 PDF даташит

Спецификация NTE2716 изготовлена ​​​​«NTE» и имеет функцию, называемую «Integrated Circuit NMOS / 16K UV Erasable PROM».

Детали детали

Номер произв NTE2716
Описание Integrated Circuit NMOS / 16K UV Erasable PROM
Производители NTE
логотип NTE логотип 

5 Pages
scroll

No Preview Available !

NTE2716 Даташит, Описание, Даташиты
NTE2716
Integrated Circuit
NMOS, 16K UV Erasable PROM
Description:
The NTE2716 is a 16,384–bit (2048 x 8–bit) Erasable and Electrically Reprogrammable PROM in a
24–Lead DIP type package designed for system debug usage and similar applications requiring non-
volatile memory that could be reprogrammed periodically. The transparent lid on the package allows
the memory content to be erased with ultraviolet light.
The NTE2716 operates from a single power supply and has a static power down mode.
Features:
D Single 5V Power Supply
D Automatic Power–Down Mode (Standby)
D Organized as 2048 Bytes of 8Bits
D TTL Compatible During Read and Program
D Access Time: 350ns
D Output Enable Active Level is User Selectable
Absolute Maximum Ratings: (Note 1)
All Input or Output Voltages (with respect to VSS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +6 to –0.3V
VPP Supply Voltage (with respect to VSS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +28 to –0.3V
Temperature Under Bias (VPP = 5V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –10° to +80°C
Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0° to +70°C
Storage Temperature Range. Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65° to +125°C
Note 1. Permanent device may occur if “Absolute Maximum Ratings” are exceeded. Functional op-
eration should be restricted to “Recommended Operating Conditions”. Exposure to higher
than recommended voltages for extended periods of time could affect device reliability.
Note 2. This device contains circuitry to protect the inputs against damage due to high static voltages
or electric fields; however, it is advised that normal precautions be taken to avoid application
of any voltage higher than maximum rated voltages to this high–impedance circuit.









No Preview Available !

NTE2716 Даташит, Описание, Даташиты
Mode Selection:
Mode
Pin Number
Read
Output Disable
Standby
Program
Program Verify
Program Inhibit
9–11, 13–17
DQ
12
VSS
18
E/Progr
20
G (Note3)
21
VPP
Data Out
VSS
VIL
VIL VCC (Note 3)
High Z VSS Dont Care VIH VCC (Note 3)
High Z
VSS
VIH
Dont Care
VCC
Data In
VSS Pulsed VIL to VIH VIH
VPPH
Data Out
VSS
VIL
VIL VPPH
High Z
VSS
VIL
VIH VPPH
Note 3. In Read Mode if VPP VIH, then G (active low)
VPP VIL, then G (active high)
24
VCC
VCC
VCC
VCC
VCC
VCC
VCC
Capacitance: (f = 1MHz, TA = +25°C, periodically sampled rather than 100% tested)
Parameter
Symbol
Test Conditions
Min Typ Max
Input Capacitance
Cin Vin = 0V
4.0 6.0
Output capacitance
Cout Vout = 0V
8.0 12.0
Unit
pF
pF
Note 4. Capacitance measured with a Boonton Meter or
effective capacitance calculated from the equation:
C = It
V
DC Operating Conditions and Characteristics: (Full Operating Voltage and Temperature Range
unless otherwise specified)
Parameter
Symbol
Test Conditions
Min Typ Max Unit
Recommended DC Read Operating Conditions
Supply Voltage
VCC, VPP Note 5
Input High Voltage
VIH
Input Low Voltage
VIL
Recommended DC Operating Conditions
4.75 5.0 5.25
2.0
0.1
VCC+1.0
+0.8
V
V
V
Address, G and E/Progr Input Sink Current
Output Leakage Current
VCC Supply Current (Standby)
VCC Supply Current (Active)
VCC Supply Current
Output Low Voltage
Output High Voltage
Iin Vin = 5.25V
ILO Vout = 5.25V, G = 5V
ICC1 E/Progr = VIH, G = VIL
ICC2 Outputs Open, G = E/Progr = VIL
IPP1 VPP = 5.25V, Note 5
VOL IOL = 2.1mA
VOH IOH = 400µA
2.4
10 µA
10 µA
25 mA
100 mA
5 mA
0.45 V
V
Note 5. VCC must be applied simultaneously or prior to VPP. VCC must also be switched off simulta-
neously with or after VPP. With VPP connected directly to VCC during the read operation, the
supply current would then be the sum of IPP1 and ICC.









No Preview Available !

NTE2716 Даташит, Описание, Даташиты
AC Operating Conditions and Characteristics: (Full Operating Voltage and Temperature Range,
Note 6, unless otherwise specified)
Parameter
Symbol
Test Conditions
Min Typ Max Unit
Address Valid to Output Valid
E/Progr to Output Valid
Output Enable to Output Valid
E/Progr to High Z Output
Output Disable to High Z Output
Data Hold from Address
tAVQV
tELQV
tGLQV
tEHQZ
tGHQZ
tAXDX
E/Progr = G = VIL
Note 7
E/Progr = VIL
E/Progr = VIL
E/Progr = G = VIL
– – 350 ns
– – 350 ns
– – 150 ns
0 100 ns
0 100 ns
0 – – ns
Note 6. Input Pulse Levels . . . . . . . . . . . . . . 0.8V and 2.2V
Input Rise and Fall Times . . . . . . . . . . . . . . . . . 20ns
Input and Output Timing Levels . . . . 2.0 and 0.8V
Note 7. tELQV is referenced to E/Progr or stable address, whichever occurs last.
DC Programming Conditions and Characteristics: (TA = +25°C ±5°C)
Parameter
Symbol
Test Conditions
Min Typ Max Unit
Recommended Programming Operating Conditions
Supply Voltage
VCC, VPPL
VPPH
Input High Voltage for Data
VIH
Input Low Voltage for Data
VIL
Programming Operating DC Characteristics
4.75 5.0 5.25
24.0 25.0 26.0
2.2
0.1
VCC+1.0
+0.8
V
V
V
V
Address, G and E/Progr Input Sink Current
VPP Programming Pulse Supply Current
VCC Supply Current
ILI Vin = 5.25V/0.45V
––
10 µA
IPP2 VPP = 25V ±1V, E/Progr = VIH
30 mA
ICC Outputs Open
– – 160 mA
AC Programming Operating Conditions and Characteristics:
Parameter
Address Setup Time
Output Enable High to Program Pulse
Data Setup Time
Address Hold Time
Output Enable Hold Time
Data Hold Time
VPP Setup Time
VPP to Enable Low Time
Output Disable to High Z Output
Output Enable to Valid Data
Program Pulse Width
Program Pulse Rise Time
Program Pulse Fall Time
Symbol Test Conditions Min Typ Max Unit
tAVEH
tGHEH
tDVEH
tELAX
tELGL
tELQZ
2.0
2.0
2.0
2.0
2.0
2.0
µs
µs
µs
µs
µs
µs
tPHEH
tELPL
tGHQZ
0 – – ns
0 – – ns
0 150 ns
tGLQV E/Progr = VIL
– – 150 ns
tEHEL Note 8
1 55 ms
tPR 5 – – ns
tPF 5 – – ns
Note 8. If shorter than 45ms (min) pulses are used, the same number of pulses should be applied
after the specific data has been verified to ensure that good programming levels have been
written.










Скачать PDF:

[ NTE2716.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
NTE271Silicon Complementary TransistorsNTE
NTE
NTE2716Integrated Circuit NMOS / 16K UV Erasable PROMNTE
NTE

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск