|
|
PDF NTE789 Data sheet ( Hoja de datos )
| Número de pieza | NTE789 | |
| Descripción | Integrated Circuit Stereo Multiplex Decoder | |
| Fabricantes | NTE Electronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NTE789 (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
|
No Preview Available !
NTE789
Integrated Circuit
Stereo Multiplex Decoder
Description:
The NTE789, a monolithic silicon integrated circuit, is a stereo multiplex decoder intended for FM multiplex
systems.
This stereo multiplex decoder requires only one low–inductance tuning coil (requires only one adjustment for
complete alignment), provides automatic stereo switching, energizes a stereo indicator lamp, and operates
from a wide range of voltage supplies.
Figure 1 shows the block diagram for the NTE789. The input signal form the detector is amplified by a low–dis-
tortion preamplifier and simultaneously applied to both signal, generated by a local voltage–controlled oscilla-
tor (VCO), is counted down by two frequency dividers to a 38kHz signal and to two 19–kHz pilot–tone supplied
by the FM detector is compared to the locally generated 19–kHz signal in a synchronous detector.
The resultant signal controls the voltage controlled oscillator (VC)) so that it produces an output signal to
phase–lock the stereo decoder with the pilot tone. A second sychronous detector compares the locally gener-
ated 19–kHz signal with the 19–kHz pilot tone. If the pilot tone exceeds and externally adjustable threshold
voltage, a Schmitt trigger circuit is energized. The signal from the Schmitt trigger lights the stereo indicator,
enables the 38–kHz synchronous detector, and automatically switches the NTE789 form monaural to stereo
operation. The output signal from the 38–kHz detector and the composite signal from the preamplifier are ap-
plied to a matrixing circuit from which emerge the resultant left and right channel audio signals. These signals
are applied to their respective left and right post amplifiers for amplification to a level sufficient to drive most
audio amplifiers.
The NTE789 utilizes the 16–lead quad–in–line plastic package and operates over the ambient temperature
range of –40°C to +85°C.
Features:
D Requires the use of only one low–inductance tuning coil
D Automatic stereo switching
D Directly drives a stereo indicator lamp up to 100mA
D Includes driver for stereo–lamp indicator
D Operates from a wide range of power supplies: 10 to 16 volts
D Requires only one adjustment for alignment
D Switching from monaural to stereo and stereo to monaural produces no audible thumps
D Low distortion: under 0.5%
D Separate dc input permits stereo defeat or enable
D High signal output: directly drives audio amplifiers
D Excellent SCA (storecast) rejection: 55dB typ.
D High audio channel separation: 40dB typ.
1 page | ||
| Páginas | Total 3 Páginas | |
| PDF Descargar | [ Datasheet NTE789.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NTE78 | Silicon NPN Transistor RF Power Output | NTE Electronics |
| NTE783 | Integrated Circuit Automatic Fine-Tuning Detector | NTE Electronics |
| NTE784 | Integrated Circuit Wide-Band Power Amplifier | NTE Electronics |
| NTE787 | Integrated Circuit AM Receiver Subsystem | NTE Electronics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |