|
|
Número de pieza | NTE906 | |
Descripción | Integrated Circuit Dual / High Frequency / Differential Amplifier | |
Fabricantes | NTE Electronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de NTE906 (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
No Preview Available ! NTE906
Integrated Circuit
Dual, High Frequency, Differential Amplifier
Description:
The NTE906 is an integrated circuit in a 12–Lead TO5 type package consisting of two independent
differential amplifiers with associated constant–current transistors on a common monolithic sub-
strate. The six transistors which comprise the amplifiers are general–purpose devices which exhibit
low 1/f noise and a value of fT in excess of 1GHz. These features make the NTE906 useful from DC
to 500MHz. Bias and load resistors have been omitted to provide maximum application flexibility.
The monolithic construction of the NTE906 provides close electrical and thermal matching of the am-
plifiers. This feature makes this device particularly useful in dual–channel applications where
matched performance of the two channels is required.
Features:
D Power Gain: 23dB (Typ) @ 200MHz
D Noise Figure: 4.6dB (Typ) @ 200MHz
D Two Different Amplifiers on a Common Substrate
D Independently Accessible Input and Outputs
Absolute Maximum Ratings: (TA = +25°C unless otherwise specified)
Power Dissipation, PD
Any One Transistor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300mW
Total Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600mW
Derate Above +55°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5mW/°C
Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –55° to +125°C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65° to +150°C
The following ratings apply for each transistor:
Collector–Emitter Voltage, VCEO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15V
Collector–Base Voltage, VCBO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20V
Collector–Substrate Voltage (Note 1), VCIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20V
Emitter–Base Voltage, VEBO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5V
Collector Current, IC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50mA
Note 1. The collector of each transistor is isolated from the substrate by an integral diode. The sub-
strate (Pin9) must be connected to the most negative point in the external circuit to maintain
isolation between transistors and to provide for normal transistor action.
1 page |
Páginas | Total 3 Páginas | |
PDF Descargar | [ Datasheet NTE906.PDF ] |
Número de pieza | Descripción | Fabricantes |
NTE90 | Silicon Complementary Transistors General Purpose High Gain Amplifier | NTE Electronics |
NTE902 | Integrated Circuit Operational Transconductance Amplifier | NTE Electronics |
NTE903 | Integrated Circuit Operational Amplifier | NTE Electronics |
NTE904 | Integrated Circuit General Purpose Transistor Array (Two Isolated Transistors and a Darlington Connected Transistor Pair) | NTE Electronics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |