DataSheet26.com

NE1619DS PDF даташит

Спецификация NE1619DS изготовлена ​​​​«Philips» и имеет функцию, называемую «Temperature and voltage monitor».

Детали детали

Номер произв NE1619DS
Описание Temperature and voltage monitor
Производители Philips
логотип Philips логотип 

19 Pages
scroll

No Preview Available !

NE1619DS Даташит, Описание, Даташиты
INTEGRATED CIRCUITS
NE1619
HECETA4
Temperature and voltage monitor
Product data sheet
Supersedes data of 2004 May 10
2004 Oct 05
Philips
Semiconductors









No Preview Available !

NE1619DS Даташит, Описание, Даташиты
Philips Semiconductors
HECETA4 Temperature and voltage monitor
Product data sheet
NE1619
GENERAL DESCRIPTION
The NE1619 is designed for monitoring the temperatures and supply
voltages of microprocessor-based systems by measuring those
parameters and comparing the readings with programmable limits.
The device provides five possible analog inputs, a remote
temperature sensor input and on-board local temperature sensor.
The device also monitors its own power supply and provides digital
inputs for the Pentium/PRO power supply ID code.
The device communicates with the system controller via an SMBus
(System Management bus) by which it can be programmed for
operation and data collection. Readings come from conversions of
the on-board A-to-D converter which cycles through all
measurements in sequence in approximately one second when the
conversion is started. The device includes a number of registers to
store data of the device configuration, status, readings and limits.
Except for the temperature-related data which are in 8-bit digital
2’s complement format, all the data are in 8-bit digital straight format.
FEATURES
Monitor local and remote temperatures
Temperature accuracy of ±2 °C for local, and ±3 °C for remote
channel
Temperature resolution of 1 °C
2.8 V to 5.5 V supply range
Monitor different power supplies: 12 V, 5 V, 3.3 V, 2.5 V, VCCP, VDD
VIN accuracy of ±2% of full scale
Differential non-linearity of ±1LSB
No calibration required
Programmable temperature and voltage limits for alarms
Programmable Reset low state pulse output
SMBus 2-wire serial interface
Small 16-lead SSOP (QSOP) package
Compatible with Intel “Heceta 4” specification and reference
designs utilizing it
ESD protection exceeds 2000 V HBM per JESD22-A114,
250 V MM per JESD22-A115 and 1000 V CDM per JESD22-C101
Latch-up testing is done to JESDEC Standard JESD78 which
exceeds 100 mA
APPLICATIONS
System thermal and hardware monitor
Desktop computers
Notebook computers
Industrial controllers
Telecom equipment
ORDERING INFORMATION
Tamb = 0 °C to +125 °C
Type number Topside mark Package
Name
Description
NE1619DS NE1619
SSOP16
(QSOP)
plastic shrink small outline package; 16 leads; body width 3.9 mm;
lead pitch 0.635 mm
Standard packing quantities and other packaging data are available at www.standardproducts.philips.com/packaging.
Version
SOT519-1
2004 Oct 05
2









No Preview Available !

NE1619DS Даташит, Описание, Даташиты
Philips Semiconductors
HECETA4 Temperature and voltage monitor
Product data sheet
NE1619
PINNING
Pin Configuration
SDA 1
SCL 2
GND 3
VDD/3.3VSB 4
VID0 5
VID1 6
VID2 7
VID3 8
16 A0/RESET/NTEST_OUT
15 VCCPVIN
14 2.5VIN
13 3.3VIN
12 5VIN
11 12VIN/VID4
10 D+
9 D–/NTEST_IN
SL01228
Figure 1. Pin configuration
Pin Description
PIN #
SYMBOL
1 SDA
2 SCL
3 GND
4 VDD/3.3VSB
5 VID0
6 VID1
7 VID2
8 VID3
9 D–/NTEST_IN
10 D+
11 12VIN/VID4
12 5VIN
13 3.3VIN
14 2.5VIN
15 VCCPVIN
16 A0/RESET/NTEST_OUT
FUNCTION DESCRIPTION
Digital I/O. SMBus serial bi-directional data. Open-drain output.
Digital Input. SMBus serial clock input.
Ground. To be connected to system ground.
Power supply. Can be connected to +3.3 V standby power if monitoring in low power states is
required. This pin also serves as the analog input to monitor the VDD voltage level.
Digital Input. For Voltage ID readouts from the processor. This value is read into the VID status
register (LSB bit).
Digital Input. For Voltage ID readouts from the processor. This value is read into the VID status register.
Digital Input. For Voltage ID readouts from the processor. This value is read into the VID status register.
Digital Input. For Voltage ID readouts from the processor. This value is read into the VID status register.
Analog/Digital Input. This pin is connected to the negative terminal of the remote temperature sensor for
analog input. If this pin is held high at power-up, for digital input, it enables the NAND-TREE test mode.
Analog Input. This pin is connected to the positive terminal of the remote temperature sensor.
Analog/Digital Input. Defaults at power-up to analog input for monitoring the +12 V supply. This pin is
programmable to be a digital input for voltage ID readouts from the processor. Its state is read into
the VID4 status register.
Analog Input. For monitoring the +5 V supply.
Analog Input. For monitoring the +3.3 V supply.
Analog Input. For monitoring the +2.5 V supply.
Analog Input. For monitoring the processor voltage supply (0 to 3.0 V)
Digital I/O. At power-up, the logic input of this pin defines the LSB bit of the device slave address.
This pin can be configured to give a low pulse reset output of 20ms minimum. This pin also functions
as the output in the NAND–TREE test mode.
2004 Oct 05
3










Скачать PDF:

[ NE1619DS.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
NE1619DSTemperature and voltage monitorPhilips
Philips

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск