DataSheet26.com

OP245PS PDF даташит

Спецификация OP245PS изготовлена ​​​​«ETC» и имеет функцию, называемую «Plastic Point Source In fra red Emitting Diode».

Детали детали

Номер произв OP245PS
Описание Plastic Point Source In fra red Emitting Diode
Производители ETC
логотип ETC логотип 

2 Pages
scroll

No Preview Available !

OP245PS Даташит, Описание, Даташиты
Product Bulletin OP245PS
November 2000
Plastic Point Source Infrared Emitting Diode
Type OP245PS
Anode
Cathode
Features
Point source irradiance pattern
Wavelength matched to silicon’s peak
response
Fast switching speed
Side-looking package for space limited
applications
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0 V
Continuous Forward Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA
Peak Forward Current (2 µs pulse width, 0.1% duty cycle). . . . . . . . . . . . . . . . . . 1.0 A
Storage and Operating Temperature Range . . . . . . . . . . . . . . . . . . . -40°C to +100°C
Lead Soldering Temperature [1/16 inch (1.6mm) from case for 5 sec. with soldering
iron] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C (1)
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW(2)
Description
The OP245PS is an 850 nm, infrared
emItting diode molded in IR transmissive
amber-tinted epoxy packages. The
side-looking package is for use in PC
board mounted slotted switches or as
easily mounted interrupt detectors.
NOTES:
(1) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow
soldering. A maximum of 20 grams force may be applied to the leads when soldering.
(2) Derate linearly 1.33 mW/°C above 25°.
(3) Ee(APT) is a measurement of the average apertured radiant incidence upon a sensing area
0.180”(4.57 mm) in diameter, perpendicular to and centered on the mechanical axis of the
lens, and 0.653”(16.6 mm) from the measurement surface. Ee(APT) is not necessarily
uniform within the measured area.
The stable VF vs. Temperature
characteristic make them ideal for
applications where voltage is limited
(such as battery operation).
The low tr/tf make them ideal for high
speed operations.
Optek Technology, Inc.
1215 W. Crosby Road
Carrollton, Texas 75006
7
(972) 323-2200
Fax (972) 323-2396









No Preview Available !

OP245PS Даташит, Описание, Даташиты
Type OP245PS
Electrical Characteristics (TA = 25o C unless otherwise noted)
SYMBOL
PARAMETER
Ee(APT)
VF
IR
Apertured Irradiance
Forward Voltage
Reverse Current
λp Wavelength at Peak Emission
B
Spectral Bandwidth Between Half Power
Points
θHP Emission Angle at Half Power
tr Rise Time
tf Fall Time
MIN
.10
TYP MAX
.90
1.80
UNITS
mW/cm2
V
TEST CONDITIONS
IF = 20 mA(3)
IF = 20 mA
20 µA VR = 2 V
850 nm IF = 20 mA
50 nm IF = 20 mA
±18°
10
10
Deg.
ns
ns
IF = 20 mA
IF(PK) = 20 mA
PW = 10 µs, D.C. = 10%
Optek reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Optek Technology, Inc. 1215 W. Crosby Road Carrollton, Texas 75006
(972)323-2200
Fax (972)323-2396
8










Скачать PDF:

[ OP245PS.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
OP245PSPlastic Point Source In fra red Emitting DiodeETC
ETC

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск