OPA2132 PDF даташит
Спецификация OPA2132 изготовлена «Burr-Brown» и имеет функцию, называемую «High-Speed FET-INPUT OPERATIONAL AMPLIFIERS». |
|
Детали детали
Номер произв | OPA2132 |
Описание | High-Speed FET-INPUT OPERATIONAL AMPLIFIERS |
Производители | Burr-Brown |
логотип |
13 Pages
No Preview Available ! |
OPA132
OPA2132
OPA4132
OPA132
OPA2132
OPA4132
OPA132
OPA2132
OPA4132
SBOS054A – JANUARY 1995 – REVISED JUNE 2004
High-Speed
FET-INPUT OPERATIONAL AMPLIFIERS
FEATURES
q FET INPUT: IB = 50pA max
q WIDE BANDWIDTH: 8MHz
q HIGH SLEW RATE: 20V/µs
q LOW NOISE: 8nV/√Hz (1kHz)
q LOW DISTORTION: 0.00008%
q HIGH OPEN-LOOP GAIN: 130dB (600Ω load)
q WIDE SUPPLY RANGE: ±2.5 to ±18V
q LOW OFFSET VOLTAGE: 500µV max
q SINGLE, DUAL, AND QUAD VERSIONS
DESCRIPTION
The OPA132 series of FET-input op amps provides high-
speed and excellent dc performance. The combination of
high slew rate and wide bandwidth provide fast settling time.
Single, dual, and quad versions have identical specifications
for maximum design flexibility. High performance grades
are available in the single and dual versions. All are ideal for
general-purpose, audio, data acquisition and communica-
tions applications, especially where high source impedance
is encountered.
OPA132 op amps are easy to use and free from phase
inversion and overload problems often found in
common FET-input op amps. Input cascode circuitry pro-
vides excellent common-mode rejection and
maintains low input bias current over its wide input voltage
range. OPA132 series op amps are stable in unity gain and
provide excellent dynamic behavior over a wide range of
load conditions, including high load capacitance. Dual and
quad versions feature completely independent circuitry for
lowest crosstalk and freedom from interaction, even when
overdriven or overloaded.
Single and dual versions are available in 8-pin DIP and
SO-8 surface-mount packages. Quad is available in 14-pin
DIP and SO-14 surface-mount packages. All are specified
for –40°C to +85°C operation.
OPA132
Offset Trim 1
–In 2
+In 3
V– 4
8 Offset Trim
7 V+
6 Output
5 NC
8-Pin DIP, SO-8
OPA2132
Out A 1
–In A 2
+In A 3
V– 4
A
B
8 V+
7 Out B
6 –In B
5 +In B
8-Pin DIP, SO-8
Out A 1
–In A 2
+In A 3
V+ 4
+In B 5
–In B 6
Out B 7
OPA4132
AD
BC
14-Pin DIP
SO-14
14 Out D
13 –In D
12 +In D
11 V–
10 +In C
9 –In C
8 Out C
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
www.ti.com
Copyright © 1995-2004, Texas Instruments Incorporated
No Preview Available ! |
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, V+ to V– .................................................................... 36V
Input Voltage ..................................................... (V–) –0.7V to (V+) +0.7V
Output Short-Circuit(1) .............................................................. Continuous
Operating Temperature .................................................. –40°C to +125°C
Storage Temperature ..................................................... –55°C to +125°C
Junction Temperature ...................................................................... 150°C
Lead Temperature (soldering, 10s) ................................................. 300°C
NOTE: (1) Short-circuit to ground, one amplifier per package.
PACKAGE/ORDERING INFORMATION
For the most current package and ordering information,
see the Package Option Addendum located at the end
of this data sheet.
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Texas
Instruments recommends that all integrated circuits be
handled with appropriate precautions. Failure to ob-
serve proper handling and installation procedures can
cause damage.
ESD damage can range from subtle performance deg-
radation to complete device failure. Precision inte-
grated circuits may be more susceptible to damage
because very small parametric changes could cause
the device not to meet its published specifications.
2 OPA132, 2132, 4132
www.ti.com
SBOS054A
No Preview Available ! |
SPECIFICATIONS
At TA = +25°C, VS = ±15V, unless otherwise noted.
PARAMETER
CONDITION
OFFSET VOLTAGE
Input Offset Voltage
vs Temperature(1)
vs Power Supply
Channel Separation (dual and quad)
INPUT BIAS CURRENT
Input Bias Current(2)
vs Temperature
Input Offset Current(2)
NOISE
Input Voltage Noise
Noise Density, f = 10Hz
f = 100Hz
f = 1kHz
f = 10kHz
Current Noise Density, f = 1kHz
Operating Temperature Range
VS = ±2.5V to ±18V
RL = 2kΩ
VCM = 0V
VCM = 0V
INPUT VOLTAGE RANGE
Common-Mode Voltage Range
Common-Mode Rejection
VCM = –12.5V to +12.5V
INPUT IMPEDANCE
Differential
Common-Mode
VCM = –12.5V to +12.5V
OPEN-LOOP GAIN
Open-Loop Voltage Gain
RL = 10kΩ, VO = –14.5V to +13.8V
RL = 2kΩ, VO = –13.8V to +13.5V
RL = 600Ω, VO = –12.8V to +12.5V
FREQUENCY RESPONSE
Gain-Bandwidth Product
Slew Rate
Settling Time: 0.1%
0.01%
Overload Recovery Time
Total Harmonic Distortion + Noise
G = –1, 10V Step, CL = 100pF
G = –1, 10V Step, CL = 100pF
G = ±1
1kHz, G = 1, VO = 3.5Vrms
RL = 2kΩ
RL = 600Ω
OUTPUT
Voltage Output, Positive
Negative
Positive
Negative
Positive
Negative
Short-Circuit Current
Capacitive Load Drive (Stable Operation)
RL = 10kΩ
RL = 2kΩ
RL = 600Ω
POWER SUPPLY
Specified Operating Voltage
Operating Voltage Range
Quiescent Current (per amplifier)
TEMPERATURE RANGE
Operating Range
Storage
Thermal Resistance, θJA
8-Pin DIP
SO-8 Surface-Mount
14-Pin DIP
SO-14 Surface-Mount
IO = 0
✻ Specifications same as OPA132P, OPA132U.
NOTES: (1) Guaranteed by wafer test. (2) High-speed test at TJ = 25°C.
OPA132P, U
OPA2132P, U
MIN TYP
MAX
±0.25
±2
5
0.2
±0.5
±10
15
+5 ±50
See Typical Curve
±2 ±50
23
10
8
8
3
(V–)+2.5
96
±13
100
(V+)–2.5
1013 || 2
1013 || 6
110 120
110 126
110 130
8
±20
0.7
1
0.5
0.00008
0.00009
(V+)–1.2 (V+)–0.9
(V–)+0.5 (V–)+0.3
(V+)–1.5 (V+)–1.2
(V–)+1.2 (V–)+0.9
(V+)–2.5 (V+)–2.0
(V–)+2.2 (V–)+1.9
±40
See Typical Curve
±2.5
±15
±4
±18
±4.8
–40 +85
–40 +125
100
150
80
110
OPA132PA, UA
OPA2132PA, UA
OPA4132PA, UA
MIN
TYP
MAX
±0.5
✻
✻
✻
±2
✻
30
✻✻
✻
✻✻
✻
✻
✻
✻
✻
✻✻
86 94
✻
✻
104 ✻
104 120
104 120
✻
✻
✻
✻
✻
✻
✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻
✻
✻
✻
✻
✻
✻
✻
✻
✻
✻
✻
✻
✻
✻
✻
UNITS
mV
µV/°C
µV/V
µV/V
pA
pA
nV/√Hz
nV/√Hz
nV/√Hz
nV/√Hz
fA/√Hz
V
dB
Ω || pF
Ω || pF
dB
dB
dB
MHz
V/µs
µs
µs
µs
%
%
V
V
V
V
V
V
mA
V
V
mA
°C
°C
°C/W
°C/W
°C/W
°C/W
OPA132, 2132, 4132
SBOS054A
www.ti.com
3
Скачать PDF:
[ OPA2132.PDF Даташит ]
Номер в каталоге | Описание | Производители |
OPA2130 | Low Power Precision FET-Input Operational Amplifiers (Rev. A) | Texas Instruments |
OPA2130PA | Low Power / Precision FET-INPUT OPERATIONAL AMPLIFIERS | Burr-Brown |
OPA2130UA | Low Power / Precision FET-INPUT OPERATIONAL AMPLIFIERS | Burr-Brown |
OPA2131 | General Purpose FET-Input Operational Amplifiers (Rev. A) | Texas Instruments |
Номер в каталоге | Описание | Производители |
TL431 | 100 мА, регулируемый прецизионный шунтирующий регулятор |
Unisonic Technologies |
IRF840 | 8 А, 500 В, N-канальный МОП-транзистор |
Vishay |
LM317 | Линейный стабилизатор напряжения, 1,5 А |
STMicroelectronics |
DataSheet26.com | 2020 | Контакты | Поиск |