DataSheet26.com

OPA3690 PDF даташит

Спецификация OPA3690 изготовлена ​​​​«Burr-Brown» и имеет функцию, называемую «Low-Power / Single-Supply / Wideband Operational Amplifier».

Детали детали

Номер произв OPA3690
Описание Low-Power / Single-Supply / Wideband Operational Amplifier
Производители Burr-Brown
логотип Burr-Brown логотип 

31 Pages
scroll

No Preview Available !

OPA3690 Даташит, Описание, Даташиты
OPA830
SBOS263B − AUGUST 2004 − REVISED JANUARY 2005
Low-Power, Single-Supply, Wideband
Operational Amplifier
FEATURES
D HIGH BANDWIDTH:
250MHz (G = +1)
110MHz (G = +2)
D LOW SUPPLY CURRENT: 3.9mA (VS = +5V)
D FLEXIBLE SUPPLY RANGE:
±1.4V to ±5.5V Dual Supply
+2.8V to +11V Single Supply
D INPUT RANGE INCLUDES GROUND ON
SINGLE SUPPLY
D 4.88V OUTPUT SWING ON +5V SUPPLY
D HIGH SLEW RATE: 550V/ns
D LOW INPUT VOLTAGE NOISE: 9.2nV/Hz
D Pb-FREE SOT23 PACKAGE
APPLICATIONS
D SINGLE-SUPPLY ANALOG-TO-DIGITAL
CONVERTER (ADC) INPUT BUFFERS
D SINGLE-SUPPLY VIDEO LINE DRIVERS
D CCD IMAGING CHANNELS
D LOW-POWER ULTRASOUND
D PLL INTEGRATORS
D PORTABLE CONSUMER ELECTRONICS
374
VIN
+3V
2.26k
OPA830
562
750
+3V
100
22pF
THS1040
10−Bit
30MSPS
DESCRIPTION
The OPA830 is a low-power, single-supply, wideband,
voltage-feedback amplifier designed to operate on a single
+3V or +5V supply. Operation on ±5V or +10V supplies is also
supported. The input range extends below the negative
supply and to within 1.7V of the positive supply. Using
complementary common-emitter outputs provides an output
swing to within 25mV of either supply while driving 150. High
output drive current (±80mA) and low differential gain and
phase errors also make them ideal for single-supply
consumer video products.
Low distortion operation is ensured by the high gain
bandwidth product (110MHz) and slew rate (550V/µs), making
the OPA830 an ideal input buffer stage to 3V and 5V CMOS
ADCs. Unlike other low-power, single-supply amplifiers,
distortion performance improves as the signal swing is
decreased. A low 9.2nV/Hz input voltage noise supports
wide dynamic range operation.
The OPA830 is available in an industry-standard SO-8
package. The OPA830 is also available in an ultra-small
SOT23-5 package. For fixed-gain line driver applications,
consider the OPA832.
RELATED PRODUCTS
DESCRIPTION
SINGLES DUALS TRIPLES QUADS
Rail-to-Rail
Rail-to-Rail Fixed Gain
General-Purpose
(1800V/µs slew rate)
Low-Noise,
High DC Precision
OPA832
OPA690
OPA2830 — OPA4830
OPA2832 OPA3832
OPA2690 OPA3690
OPA820 OPA2822 — OPA4820
DC-Coupled, +3V ADC Driver
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments
semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date. Products
conform to specifications per the terms of Texas Instruments standard warranty.
Production processing does not necessarily include testing of all parameters.
Copyright 2004−2005, Texas Instruments Incorporated
www.ti.com









No Preview Available !

OPA3690 Даташит, Описание, Даташиты
OPA830
SBOS263B − AUGUST 2004 − REVISED JANUARY 2005
ABSOLUTE MAXIMUM RATINGS(1)
Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12VDC
Internal Power Dissipation . . . . . . . . . . . . . . See Thermal Analysis
Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±1.2V
Input Voltage Range (Single Supply) . . . . . . . −0.5V to +VS + 0.3V
Storage Temperature Range: D, DBV . . . . . . . . . −40°C to +125°C
Lead Temperature (soldering, 10s) . . . . . . . . . . . . . . . . . . . . +300°C
Junction Temperature (TJ) . . . . . . . . . . . . . . . . . . . . . . . . . . . +150°C
ESD Rating:
Human Body Model (HBM) . . . . . . . . . . . . . . . . . . . . . . . 2000V
Charge Device Model (CDM) . . . . . . . . . . . . . . . . . . . . . 1500V
Machine Model (MM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200V
(1) Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods
may degrade device reliability. These are stress ratings only, and
functional operation of the device at these or any other conditions
beyond those specified is not supported.
www.ti.com
This integrated circuit can be damaged by ESD. Texas
Instruments recommends that all integrated circuits be
handled with appropriate precautions. Failure to observe
proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to
complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could
cause the device not to meet its published specifications.
PACKAGE/ORDERING INFORMATION(1)
PRODUCT
PACKAGE-LEAD
PACKAGE
DESIGNATOR
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
MARKING
ORDERING
NUMBER
TRANSPORT
MEDIA, QUANTITY
OPA830 SO-8 Surface-Mount
D
−40°C to +85°C
OPA830
OPA830ID
Rails, 100
″″
OPA830IDR
Tape and Reel, 2500
OPA830
SOT23-5
DBV
−40°C to +85°C
A72
OPA830IDBVT Tape and Reel, 250
″″
″ ″ ″ OPA830IDBVR Tape and Reel, 3000
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI website
at www.ti.com.
PIN CONFIGURATIONS
NC 1
8 NC
Inverting Input 2
Noninverting Input 3
7 +VS
6 Output
VS 4
5 NC
SO−8
NC = No Connection
Output 1
5 +VS
VS 2
Noninverting Input 3
SOT23−5
4 Inverting Input
A72
Pin Orientation/Package Marking
2









No Preview Available !

OPA3690 Даташит, Описание, Даташиты
OPA830
www.ti.com
SBOS263B − AUGUST 2004 − REVISED JANUARY 2005
ELECTRICAL CHARACTERISTICS: VS = ±5V
Boldface limits are tested at +25°C.
At TA = 25°C, G = +2, RF = 750, and RL = 150to GND, unless otherwise noted (see Figure 3).
OPA830ID, IDBV
PARAMETER
CONDITIONS
TYP
+25°C
MIN/MAX OVER TEMPERATURE
+25°C(1)
0°C to
70°C(2)
−40°C to
+85°C(2)
UNITS
MIN/
MAX
TEST
LEVEL
(3)
AC PERFORMANCE (see Figure 3)
Small-Signal Bandwidth
Gain-Bandwidth Product
Peaking at a Gain of +1
Slew Rate
Rise Time
Fall Time
Settling Time to 0.1%
Harmonic Distortion
2nd-Harmonic
3rd-Harmonic
Input Voltage Noise
Input Current Noise
NTSC Differential Gain
NTSC Differential Phase
DC PERFORMANCE(4)
Open-Loop Voltage Gain
Input Offset Voltage
Average Offset Voltage Drift
Input Bias Current
Input Bias Current Drift
Input Offset Current
Input Offset Current Drift
G = +1, VO 0.2VPP
G = +2, VO 0.2VPP
G = +5, VO 0.2VPP
G = +10, VO 0.2VPP
G +10
VO 0.2VPP
G = +2, 2V Step
0.5V Step
0.5V Step
G = +2, 1V Step
VO = 2VPP, f = 5MHz
RL = 150
RL 500
RL = 150
RL 500
f > 1MHz
f > 1MHz
RL = 150
VCM = 0V
VCM = 0V
310
120
25
11
110
6
600
3.3
3.5
42
−67
−71
−60
−77
9.5
3.7
0.07
0.17
74
±1.5
+5
±0.1
70
18
8
85
280
5.8
5.9
63
−59
−62
−50
−65
10.5
4.7
68
16
7
82
270
5.85
5.95
65
−57
−61
−49
−62
11.0
5.2
66 65
±7 ±8.1
±25
+10 +12
±12
±1 ±1.2
±5
65
15
6
80
260
5.9
6.0
66
−56
−60
−48
−59
11.5
5.7
64
±8.6
±25
+13
±12
±1.4
±5
MHz
MHz
MHz
MHz
MHz
dB
V/µs
ns
ns
ns
typ
min
min
min
min
typ
min
max
max
max
dBc
dBc
dBc
dBc
nV/Hz
pA/Hz
%
°
max
max
max
max
max
max
typ
typ
dB
mV
µV/°C
µA
nA/°C
µA
nA/°C
min
max
max
max
max
max
max
C
B
B
B
B
C
B
B
B
B
B
B
B
B
B
B
C
C
A
A
B
A
B
A
B
INPUT
Negative Input Voltage(5)
Positive Input Voltage(5)
Common-Mode Rejection Ratio (CMRR)
Input Impedance
Differential Mode
Common-Mode
Input-Referred
−5.5
3.2
80
10 2.1
400 1.2
−5.4
3.1
76
−5.3
3.0
74
−5.2
2.9
72
V max
V min
dB min
kΩ  pF typ
kΩ  pF typ
A
A
A
C
C
OUTPUT
Output Voltage Swing
Current Output, Sinking and Sourcing
Short-Circuit Current
Closed-Loop Output Impedance
G = +2, RL = 1kto GND
G = +2, RL = 150to GND
Output Shorted to Ground
G = +2, f 100kHz
±4.88
±4.64
±85
150
0.06
±4.86
±4.60
±65
±4.85
±4.58
±60
±4.84
±4.56
±55
V min A
V min A
mA min
A
mA typ C
typ C
POWER SUPPLY
Minimum Operating Voltage
Maximum Operating Voltage
Maximum Quiescent Current
Minimum Quiescent Current
Power-Supply Rejection Ratio (+PSRR)
VS = ±5V
VS = ±5V
Input-Referred
±1.4
4.25
4.25
66
±5.5
4.7
4.0
61
±5.5
5.3
3.6
60
±5.5
5.9
3.3
59
V typ C
V max A
mA max
A
mA min
A
dB min A
THERMAL CHARACTERISTICS
Specification: ID, IDBV
Thermal Resistance, qJA
D SO-8
DBV SOT23-5
−40 to +85
125
150
°C
°C/W
°C/W
typ
typ
typ
C
C
C
(1) Junction temperature = ambient for +25°C specifications.
(2) Junction temperature = ambient at low temperature limits; junction temperature = ambient +5°C at high temperature limit for over temperature specifications.
(3) Test levels: (A) 100% tested at +25°C. Over temperature limits by characterization and simulation. (B) Limits set by characterization and simulation. (C) Typical
value only for information.
(4) Current is considered positive out of pin.
(5) Tested < 3dB below minimum specified CMRR at ± CMIR limits.
3










Скачать PDF:

[ OPA3690.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
OPA3691.8V 700nA Zer -Crossover RAIL-TO-RAIL I/O OPERATIONAL AMPLIFIER (Rev. B)Texas Instruments
Texas Instruments
OPA3690Triple Wideband Voltage-Feedback Operational Amplifier with Disable (Rev. G)Texas Instruments
Texas Instruments
OPA3690Low-Power / Single-Supply / Wideband Operational AmplifierBurr-Brown
Burr-Brown
OPA3691Triple Wideband Current-Feedback Operational Amplifier With Disable (Rev. E)Texas Instruments
Texas Instruments

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск