DataSheet.es    


PDF OPA4137 Data sheet ( Hoja de datos )

Número de pieza OPA4137
Descripción LOW COST FET-INPUT OPERATIONAL AMPLIFIERS MicroAmplifier Series
Fabricantes Burr-Brown 
Logotipo Burr-Brown Logotipo



Hay una vista previa y un enlace de descarga de OPA4137 (archivo pdf) en la parte inferior de esta página.


Total 9 Páginas

No Preview Available ! OPA4137 Hoja de datos, Descripción, Manual

®
OPA4137
OPA137
OPA4137
OPA2137
OPA137
OPA2137
OPA4137
SBOS089
LOW COST
FET-INPUT OPERATIONAL AMPLIFIERS
MicroAmplifier Series
FEATURES
q FET INPUT: IB = 5pA
q LOW OFFSET VOLTAGE: 1.5mV
q WIDE SUPPLY RANGE: ±2.25V to ±18V
q LOW QUIESCENT CURRENT: 220µA/channel
q EXCELLENT SPEED/POWER: 1MHz
q INPUT TO POSITIVE SUPPLY
q MicroSIZE PACKAGES: SOT-23-5, MSOP-8
q SINGLE, DUAL, AND QUAD
APPLICATIONS
q STRAIN GAGE AMPLIFIER
q PHOTODETECTOR AMPLIFIER
q PRECISION INTEGRATOR
q BATTERY-POWERED INSTRUMENTS
q TEST EQUIPMENT
q ACTIVE FILTERS
OPA137
DESCRIPTION
OPA137 series FET-input operational amplifiers are designed
for low cost and miniature applications. In addition to small
size (SOT-23-5 and MSOP-8 packages), they provide low
input bias current (5pA), low quiescent currrent (220µA/
channel), and high open-loop gain (94dB).
Either single (+4.5V to +36V) or dual (±2.25 to ±18V)
supplies can be used. The input common-mode voltage range
includes the positive supply—suitable for many single-supply
applications. Single, dual, and quad versions have identical
specifications for maximum design flexibility.
OPA137 op amps are easy to use and free from phase
inversion and overload problems found in some FET-input
amplifiers. High performance, including linearity, is main-
tained as the amplifiers swing to their specified limits. In
addition, the combination of high slew rate (3.5V/µs) and
wide bandwidth (1MHz) provide fast settling time assuring
good dynamic response. Dual and quad designs feature com-
pletely independent circuitry for lowest crosstalk and freedom
from interaction.
The single (OPA137) packages are the tiny 5-lead SOT-23-5
surface mount, SO-8 surface mount, and 8-pin DIP. The dual
(OPA2137) comes in the miniature MSOP-8 surface mount,
SO-8 surface mount, and 8-pin DIP packages. The quad
(OPA4137) packages are the SO-14 surface mount and the
14-pin DIP. All are specified from –40°C to +85°C and operate
from –55°C to +125°C. A SPICE macromodel is available for
design analysis.
NC 1
–In 2
8 NC
7 V+
OPA4137
+In 3
6 Output
Out A 1
14 Out D
Out 1
V– 2
+In 3
OPA137
V– 4
5 NC
5 V+
8-Pin DIP, SO-8
4 –In
Out A 1
–In A 2
+In A 3
V– 4
OPA2137
A
B
8 V+
7 Out B
6 –In B
5 +In B
–In A 2
+In A 3
V+ 4
+In B 5
–In B 6
Out B 7
A
B
13 –In D
D
12 +In D
11 V–
10 +In C
C
9 –In C
8 Out C
SOT-23-5
8-Pin DIP, SO-8, MSOP-8
14-Pin DIP
SO-14
International Airport Industrial Park • Mailing Address: PO Box 11400, Tucson, AZ 85734 • Street Address: 6730 S. Tucson Blvd., Tucson, AZ 85706 • Tel: (520) 746-1111 • Twx: 910-952-1111
Internet: http://www.burr-brown.com/ • FAXLine: (800) 548-6133 (US/Canada Only) • Cable: BBRCORP • Telex: 066-6491 • FAX: (520) 889-1510 • Immediate Product Info: (800) 548-6132
© 1998 Burr-Brown Corporation
PDS-1438A
Printed in U.S.A. August, 1998

1 page




OPA4137 pdf
TYPICAL PERFORMANCE CURVES (CONT)
At TA = +25°C, VS = ±15V, RL = 10k, connected to ground, unless otherwise noted.
TOTAL HARMONIC DISTORTION + NOISE
vs FREQUENCY
1
G = 10
0.1
G=1
0.01
100
VO = 3.5Vrms
1k 10k
Frequency (Hz)
100k
AOL, CMRR, PSRR vs TEMPERATURE
95
VO = –13.8V to +13.9V
90
AOL
85 CMRR
80 PSRR
75
70
65
–75 –50 –25
0 25 50
Temperature (°C)
75 100 125
±400
±350
QUIESCENT CURRENT and SHORT-CIRCUIT CURRENT
vs TEMPERATURE
(IQ Per Amplifier)
±80
±70
±300
±250
+ISC
±60
±50
±200
IQ
±40
±150
±30
±100
±50
–ISC
±20
±10
0
–75 –50 –25
0 25 50
Temperature (°C)
0
75 100 125
±230
±220
QUIESCENT CURRENT and SHORT-CIRCUIT CURRENT
vs SUPPLY VOLTAGE
(IQ Per Amplifier)
±70
±60
±210
IQ
±ISC
±50
±200
±40
±190
±180
±30
–ISC
±20
±170
±10
±160
0
±5 ±10 ±15
Supply Voltage (V)
0
±20
MAXIMUM OUTPUT VOLTAGE vs FREQUENCY
30 VS = ±15V
Maximum output voltage
25 without visible dynamic
distortion.
20 CL = 100pF
15
CL = 200pF
10
Without slew-rate
induced distortion
5
VS = ±5V
0
10k
100k
Frequency (Hz)
1M
OUTPUT VOLTAGE SWING vs OUTPUT CURRENT
(V+)
(V+) –1
–55°C
(V+) –2
(V+) –3
(V–) +3
(V–) +2
+125°C
+125°C
+25°C
+25°C
(V–) +1
(V–)
0
–55°C
±2 ±4 ±6 ±8
Output Current (mA)
±10
®
5 OPA137, 2137, 4137

5 Page










PáginasTotal 9 Páginas
PDF Descargar[ Datasheet OPA4137.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
OPA4130Low Power Precision FET-Input Operational Amplifiers (Rev. A)Texas Instruments
Texas Instruments
OPA4130Low Power / Precision FET-INPUT OPERATIONAL AMPLIFIERSBurr-Brown
Burr-Brown
OPA4131General Purpose FET-Input Operational Amplifiers (Rev. A)Texas Instruments
Texas Instruments
OPA4131General Purpose FET-INPUT OPERATIONAL AMPLIFIERSBurr-Brown
Burr-Brown

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar