DataSheet26.com

S9318S PDF даташит

Спецификация S9318S изготовлена ​​​​«ETC» и имеет функцию, называемую «Nonvolatile DACPOT Electronic Potentiometer With Up/Down Counter Interface».

Детали детали

Номер произв S9318S
Описание Nonvolatile DACPOT Electronic Potentiometer With Up/Down Counter Interface
Производители ETC
логотип ETC логотип 

6 Pages
scroll

No Preview Available !

S9318S Даташит, Описание, Даташиты
SUMMIT
MICROELECTRONICS, Inc.
Nonvolatile DACPOT™ Electronic Potentiometer
With Up/Down Counter Interface
S9318
FEATURES
• Digitally Controlled Electronic Potentiometer
• 8-Bit Digital-to-Analog Converter (DAC)
– Independent Reference Inputs
– Differential Non-Linearity - ±0.5LSB max
– Integral Non-Linearity - ±1LSB max
• VOUT Value in E2PROM for Power-On Recall
– Equivalent to 256-Step Potentiometer
• Unity Gain Op Amp Drives up to 1mA
• Simple Trimming Adjustment
– Up/Down Counter Style Operation
• Low Noise Operation
• “Clickless” Transitions between DAC Steps
• No Mechanical Wearout Problem
– 1,000,000 Stores (typical)
– 100 Year Data Retention
• Operation from +2.7V to +5.5V Supply
• Low Power, 1mW max at +5V
OVERVIEW
The S9318 DACPOT™ trimmer is an 8-bit nonvolatile
DAC designed to replace mechanical potentiometers.
The S9318 includes a unity-gain amplifier to buffer the
DAC output and enables VOUT to swing from rail to rail.
The DACPOT trimmer operates over a supply voltage
range of 2.7V to 5.5V.
The S9318’s simple up/down counter input provides an
ideal interface for automatic test equipment to dither and
monitor the VOUT voltage. This interface allows for quick
and consistent calibration of even the most sophisticated
systems.
The S9318 is a pin-compatible performance upgrade for
other industry nonvolatile potentiometers. The S9318
offers double the resolution of these devices and provides
‘clickless’ transitions of VOUT.
FUNCTIONAL BLOCK DIAGRAM
8-bit E2 PROM
VDD
UP/DN
INC
CS
Counter
&
Write
Control
8-bit
Data
Register
8-bit DAC
GND
-
AMP
+
VH
VOUT
VL
2016 ILL2.1
SUMMIT MICROELECTRONICS, Inc. • 300 Orchard City Drive, Suite 131 • Campbell, CA 95008 • Telephone 408-378-6461 • Fax 408-378-6586 • www.summitmicro.com
© SUMMIT MICROELECTRONICS, Inc. 1999
2016-04 4/24/99
Characteristics subject to change without notice
1









No Preview Available !

S9318S Даташит, Описание, Даташиты
PIN NAMES
Symbol
INC
UP/DN
VH
GND
VOUT
VL
CS
VDD
Description
Increment Input, High to Low
Edge Trigger
Up/Down Input controlling relative
VOUT movement
V+ reference input
Analog and Digital Ground
Trimmed Voltage Output
V- reference input
Active low chip select input
Supply Voltage (2.7V to 5.5V)
PINOUT
INC
UP/DN
VH
GND
1
2
3
4
S9318
8 VDD
7 CS
6 VL
5 VOUT
2016 ILL1.1
Analog Section
The S9318 is an 8-bit, voltage output digital-to-analog
converter (DAC). The DAC consists of a resistor network
that converts an 8-bit value into equivalent analog output
voltages in proportion to the applied reference voltage.
Reference Inputs
The voltage differential between the VL and VH inputs
sets the full-scale output voltage range. VL must be equal
to or greater than ground (i.e. a positive voltage). VH must
be greater than VL and less than or equal to VDD. See
table on page 3 for guaranteed operating limits.
Output Buffer Amplifier
The voltage output is a precision unity-gain follower that
can slew up to 1V/µs.
Digital Interface
The interface is designed to emulate a simple up/down
counter, but instead of a parallel count output, a
ratiometric voltage output is provided.
Chip Select (CS) is an active low input. Whenever CS is
high the S9318 is in standby mode and consumes the
least power. This mode is equivalent to a potentiometer
that is adjusted to the required setting. When CS is low the
S9318 will recognize transitions on the INC input and will
move the VOUT either toward the VH reference or toward
the VL reference depending upon the state of the UP/DN
input.
The host may exit an adjustment routine in two ways:
deselecting the S9318 while INC is low will not perform a
store operation (a subsequent power cycle will recall the
original data); deselecting the S9318 while INC is high will
store the current VOUT setting into nonvolatile memory.
Increment (INC) is an edge triggered input. Whenever
CS is low and a high to low transition occurs on the INC
input, the VOUT voltage will either move toward VH or VL
depending upon the state of the UP/DN input.
UP/Down (UP/DN) is an input that will determine the VOUT
movement relative to VH and VL. When CS is low, UP/DN
is high and there is a high to low transition on INC, the
VOUT voltage will move (1/256th x VH-VL) toward VH.
When CS and UP/DN are low, and there is a high to low
transition on INC, the VOUT will move (1/256th x VH-VL)
toward VL.
2016-04 4/24/99
2









No Preview Available !

S9318S Даташит, Описание, Даташиты
S9318
ABSOLUTE MAXIMUM RATINGS*
Temperature Under Bias
Storage Temperature
Voltage on pins with reference to GND:
Analog Inputs
Digital Inputs
Analog Outputs
Digital Outputs
Lead Solder Temperature (10 secs)
-55°C to +125°C
-65°C to +150°C
-0.5V to VDD+.5V
-0.5V to VDD+.5V
-0.5V to VDD+.5V
-0.5V to VDD+.5V
300°C
*COMMENT
Stresses above those listed under Absolute Maxi-
mum Ratings may cause permanent damage to
the device. These are stress ratings only, and
functional operation of the device at these or any
other conditions outside those listed in the opera-
tion sections of this specification is not implied.
Exposure to any absolute maximum rating for
extended periods may affect device performance
and reliability.
RECOMMENDED OPERATING CONDITIONS
Condition
Temperature
VDD
Min
-40°C
+2.7V
Max
+85°C
+5.5V
DAC DC ELECTRICAL CHARACTERISTICS
VDD = +2.7V to +5.5V, VrefH = VDD, VrefL = 0V, TA = -40°C to +85°C, unless specified otherwise
2016 PGM T1.1
Symbol Parameter
Conditions
Min.
Typ.
Max. Units
Accuracy INL
Integral Non-Linearity
ILOAD = 100µA,
- 0.5 ±1 LSB
DNL
Differential Non-Linearity ILOAD = 100µA,
Guaranteed but not tested
-
0.1 ±0.5 LSB
References VH
VrefH Input Voltage
VrefL
-
VDD
V
VL VrefL Input Voltage
Gnd
-
VrefH
V
RIN VrefH to VrefL Resistance
- 38K -
TCRIN
Temperature Coefficient
of RIN
VrefH to VrefL
- 600 - ppm/°C
Analog
GEFS
Full-Scale Gain Error
DATA = FF
- - ±1 LSB
Output
VOUTZS Zero-Scale Output Voltage DATA = 00
0 20 mV
TCVOUT VOUT Temperature
Coefficient
VDD = +5, ILOAD = 50µA,
VrefH = +5V, VrefL = 0V
Guaranteed but not tested
-
- 50 µV/°C
IL Amplifier Output Load Current
-200
+1000 µA
ROUT
Amplifier Output Resistance IL = 100µA
VDD = +5V
VDD = +3V
-
-
10
20
PSRR Power Supply Rejection ILOAD = 10µA
- - 1 LSB/V
eN
Amplifier Output Noise
f = 1KHz, VDD = +5V
- 90 - nV/ HZ
THD
Total Harmonic Distortion VIN = 1V rms, f = 1KHz
- 0.08 - %
BW Bandwidth - 3dB
VIN = 100mV rms
- 300 - kHz
2016 PGM T3.4
2016-04 4/24/99
3










Скачать PDF:

[ S9318S.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
S9318Nonvolatile DACPOT Electronic Potentiometer With Up/Down Counter InterfaceETC
ETC
S9318SNonvolatile DACPOT Electronic Potentiometer With Up/Down Counter InterfaceETC
ETC

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск